NOVELL TECHNICAL INFORMATION DOCUMENT TITLE: SAA016.EXE; NetWare 2.0 SAA Maintenance DOCUMENT ID: TID1004841 DOCUMENT REVISION: A DATE: 03AUG95 ALERT STATUS: Yellow INFORMATION TYPE: Symptom Solution README FOR: SAA016.EXE NOVELL PRODUCT and VERSION: NetWare for SAA 2.0 ABSTRACT: SAA016.EXE and SAA017.EXE are the current maintenance patch for SAA 2.0. It upgrades "NetWare for SAA 2.0.22" to "NetWare for SAA 2.0.23". SAA016.EXE and SAA017 are recommended for SAA 2 sites. Please apply SAA016 and SAA017 before calling Tech Support. ----------------------------------------------------------------- DISCLAIMER THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL. NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION ONLY. NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION. ----------------------------------------------------------------- SYMPTOM Symptoms related to API's 1. Register AH not updated during successful execution. 2. Convert using table G not functioning properly. 3. Application Termination problems. Symptoms related to AS400. 1. If AS400PCS.NLM loaded with security ON and the Netware Client Address started with 0, user did not connect. 2. WSF failure if client was connecting to 3 or more systems. 3. AS400PCS unloading, because Client Access V3R10 would deallocate. Symptoms Related to Data Links. 1. R2SDLC driver loading concurrently with the R3SDLC driver using the same I/O port caused server abends. 2. R3SDLC driver hang with receive overruns. Symptoms Related to NWSAA. 1. RUNCMD with long response, not working for a PU which is not the focal point. 2. LUx secondary return codes intermittently byte swapped. 3. LUx, SLIOPEN verb with secondary initialization with an unformatted LOGON message returned primary return code session failure=0F00, and secondary return code LUx_Sli_Logic_Error=7FD00000. 4. LUx, SLI_OPEN failed after USS MSG 10. 5. Bind without mode name and or PLU name in the user data field. 6. PREPARE_TO_RECEIVE REPORTED conversation failure when partner did SEND_ERROR rather than PROG_ERROR_PURGING. 7. Receive Immediate could fail with large (64K) RU size. Symptoms related to Windows Configurator. 1. Lower case for adapter not allowed. 2. Link Type restricted to A - Z. 3. Setup wiped out existing icons. 4. Local station address accepted more than 2 digits hex. 5. Sorting for the print job name list box was case sensitive. 6. No PU profile remained selected in hot standby. 7. After the PU profile was copied, Focus moved to the PU profile. New Feature 1. APPC and AS400 configuration in the windows configurator. 2. Multi adapter PU2.1 profile for all peer connections. SOLUTION Apply SAA016 and SAA017. Self-Extracting File Name: SAA016.EXE Revision: A Files Included Size Date Time \ SAA016.TXT (This File) \DISK1\ NWSAA.001 2668 04-19-95 1:47p NWSAA.RMV 1706 04-19-95 1:46p PRODUCT.DEF 1045 04-24-95 4:30p CSSYSMSG.NLM 43905 02-16-95 4:09p PINSTALL.NLM 130785 02-16-95 4:09p \DISK1\AS400\ STRNRTR.EXE 49337 03-28-95 10:59a STRNTCP.EXE 69951 03-28-95 3:14p \DISK1\DOS\ CCM.OVL 51708 03-30-95 3:05p APPC.OVL 8982 03-30-95 3:06p SSET.OVL 35768 04-18-95 2:27p \DISK1\INSTALL\ CSSYSMSG.NLM 43905 02-16-95 4:09p PINSTALL.NLM 130785 02-16-95 4:09p \DISK1\INSTALL\NLS\4\ CSSYSMSG.HLP 3302 05-18-93 3:49p CSSYSMSG.MSG 11605 01-20-95 10:13a PINSTALL.HLP 2799 05-26-94 7:41p PINSTALL.MSG 12786 12-05-94 12:58p \DISK1\NLMS\ CCM.NLM 41501 03-30-95 12:23p SSET.NLM 50068 04-18-95 1:30p NWSAA.NLM 244593 04-20-95 2:53p QLLCS.NLM 48227 03-27-95 4:56p R2SDLC.LAN 13908 02-17-95 3:02p R3SDLC.LAN 22622 03-08-95 2:58p AS400PCS.NLM 31808 04-13-95 10:26a NWSAACFG.NLM 61380 03-28-95 4:38p \DISK1\NLS\4\ QLLCS.MSG 2706 06-18-93 5:27p CSSYSMSG.HLP 3302 05-18-93 3:49p CSSYSMSG.MSG 11605 01-20-95 10:13a NWSAACFG.MSG 402 03-28-95 3:46p PINSTALL.HLP 2799 05-26-94 7:41p PINSTALL.MSG 12786 12-05-94 12:58p \DISK1\SYSTEM.3X\ LLC8022.NLM 34876 03-23-95 1:30p \DISK1\SYSTEM.4X\ LLC8022.NLM 36145 03-23-95 1:28p \DISK1\WINDOWS\ CCS.DLL 37392 03-28-95 7:09p SSET.DLL 56557 04-19-95 6:06p TRANS.EXE 8768 03-28-95 7:17p ATTMGR.EXE 16416 03-29-95 9:23a CCSWIN.EXE 9408 03-28-95 7:10p WINLUX.DLL 4929 03-29-95 9:43a WINSSET.DLL 4848 03-30-95 3:56p Installation Instructions: 1. SAA016 and SAA017 will install only on top of version 2.00.22 of NWSAA!! It will not work on any BETA version of NWSAA 2.0! 2. You must have the latest NIC drivers for your system. They must be ODI 4.0 compliant AND certified for use with SAA 2.0!! 3. Only attempt installation on NetWare 4.1 or NetWare 3.12. 4. CSLOAD/CSUNLOAD commands are no longer supported. 5. If you have not already done so, install the LANDR4.EXE patch. 6. If you have not already done so, install the STRTL3.EXE patch. 7. Make a directory called SAA016, on a hard disk or network drive. Make sure the directory path is available to the server(s) you are updating. 8. Put SAA016.EXE into the SAA016 directory you just made. 9. Unzip SAA016.EXE. SAA016 10. LOAD Install. 11. Select Product Options. 12. Press . 13. Select the directory path created above ie, SYS:\SAA016\DISK1 or C:\SAA016\DISK1 14. Select the server to update. 15. Press . 16. Wait for the update to complete. 17. Press . You should see NWSAA 2.0.23 18. See readme for saa017 for instructions on installation of that patch. !! IMPORTANT: Never manually copy COMMEXEC.NLM or NWSAA.NLM into the system. The install scripts must be used! If you copy in manually, the version information will be incorrect. If you have ever applied an ETF that required copying NWSAA.NLM into the system directory manually, please recopy the NWSAA.NLM that was on the system just prior to installing the ETF, and then be sure the version number under Product Options for NWSAA is lower than the one in this patch. If an ETF was applied with an install script, you do not have to recopy NWSAA.NLM (however, be sure the version you have is lower than the one in this patch). If the version number is equal than or greater than the one to be installed by this patch, the install will fail. !!*** 23. Restart the server before loading COMMEXEC, this will activate the new system modules copied over during installation. 24. Run SAAUP.NCF, this will autoload COMMEXEC and NWSAA.NLM. NOTE: The CONFIG.SYS for the workstation from which you run SAACOPY must contain FILES=20 (or greater) and BUFFERS=20 (or greater). Also, you must have a minimum of 550K free base memory to run this SAACOPY. Patch History: SAA016/017 are the first maintenance patch for SAA 2.0. Solution Specifics: (for some of the symptoms listed above) Solutions Related to API'S 1. Code modified so that register AH is updated with 0 upon successful execution. 2. CCSCVRT.C code modified so that it will function with table G. 3. Windows APIs modified. Solutions related to AS400 1. AS400PCS.NLM modified so that it will not reject this user. 2. AS400PCS.NLM modified. 3. The second byte of the opcode has been masked to zero. Solutions Related to NWSAA 1. NWSAA.NLM modified. 5. When no Mode Name is specified, a string of eight blanks will be assumed. ----------------------------------------------------------------- Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information. ----------------------------------------------------------------- ÿ