WC4JOY.DLL Joystick Patch for Notebook Gameport w/ Wing Commander IV (C) 1996, Origin Systems, Inc. Written May, 1995 by Anthony L. Sommers (support@origin.ea.com) Adapted for Wing Commander IV February, 1995 by Anthony L. Sommers DISCLAIMER : Origin Systems, Inc. shall not be responsible for the usage of this patch, in whole or in part. In no event will Origin Systems, Inc. or the author of this patch be liable for any damages resulting from the use or misuse of this patch. Use at your own risk. The document included with this patch may not be reproduced in any manner without the written consent of the author. About WC4JOY.DLL ---------------- WC4JOY.DLL is a set of alternate joystick routines used to provide support for Colorado Spectrum's Notebook Gameport. Joysticks tested with the Notebook Gameport in combination with this patch include the CH Flightstick, the CH Flightstick Pro, the Thrustmaster FCS, the Gravis Analog Pro, and the Microsoft Sidewinder 3D Pro. +-----------------------------------------------------------------+ | | | NOTE : THIS PATCH MAY NOT WORK FOR YOU! This patch assumes | | the Notebook Gameport is in perfect working condition before | | use. In the event the game locks up during detection or | | cannot detect the Notebook Gameport, please consult the | | Notebook Gameport's documentation or Colorado Spectrum | | for troubleshooting instructions. | | | +-----------------------------------------------------------------+ Installation of WC4JOY.DLL -------------------------- 1) Change to the directory where WC4JOYNG.EXE was extracted. 2) Copy the WC4JOY.DLL file to the C:\WC4 directory, or the directory used to install the game, i.e. : COPY WC4JOY.DLL C:\WC4 [ENTER] 3) Delete the JOY0.DAT file in your directory. 4) Make sure your joystick is firmly attached to the Notebook Gameport. 5) Run Wing Commander IV. You should see a brief message stating whether or not the Notebook Gameport was detected, and whether or not the patch was installed. You will be asked to recalibrate the joystick. 6) Once you're into the game, your joystick may drift. This is due to the fact that alternate joystick routines are being used rather than the ones used when you initially installed the game. Simply recalibrate by selecting Calibrate Joystick in the Main Terminal, or press [ALT-C] in gameflow or in space flight. Everything should be working normally. 7) Once you're in space flight, you can choose your type of joystick in the Spaceflight Options menu [ALT-O]. This will allow you to use more functional joystick such as the CH Flightstick Pro, the Thrustmaster FCS, the Logitech Wingman Extreme, or the Microsoft Sidewinder 3D Pro. 8) Enjoy! :) Uninstallation of WC4JOY.DLL ---------------------------- To remove this patch, just type in the Wing IV directory : DEL WC4JOY.DLL [ENTER] Notes ----- * You MUST have a working Notebook Gameport to use this patch. If the joystick is unplugged, if there is a joystick port conflict, or if the joystick or port is faulty, you may not be able to successfully use this patch. * If you are using a computer that has the ACER BIOS, attempting to use this patch with Wing Commander IV without NG.EXE installed will cause a lockup. Simply install NG.EXE before attempting to run Wing Commander IV. * Check out the WC4 Technical Help File (WC4HELP.TXT)! Origin BBS : 512-346-2227 Internet : www.ea.com/origin.html ftp.ea.com /pub/patches/wc4help.txt * Thanks to Jason Yenawine at Origin Systems, Inc. and Ken Hall and Dayle Towers at Colorado Spectrum. Technical Support ----------------- If you are having trouble installing this patch, please feel free to contact our Technical Support department. See the Install Guide for further information. -ALS -- END OF FILE --