\HPROGRAM 'AGA'\h 'AGA' calculates gas and liquid orifice flow meters based on ANSI/API 2530, Report No. 3 - 1991 (AGA 3). The program will size orifice plates for given design conditions, find pressure drop for a given flow, or flow for a given pressure drop. The standard (AGA 3) is originally designed for gas orifices. In this program it is also used for liquid orifices. The program is divided into 4 major sub-programs: - normal gas orifices - normal liquid orifices - gas restriction orifices (critical flow orifices) - liquid restriction orifices 'AGA' lets you choose between U.S. and SI units. The gas routines (normal orifice and restriction orifice routines) will perform orifice-calculations for: - Natural gas - Air - Nitrogen For natural gas the AGA-8 Equation of State (EOS) is used for calculating physical properties. For air and nitrogen the Redlich-Kwong EOS is used. The liquid orifice routines include: - Oil (gas-free) - Water - Methanol (MeOH) - Monoethylene Glycol (MEG) - Diethylene Glycol (DEG) - Triethylene Glycol (TEG) For MeOH, MEG, DEG, and TEG the amount of water in solution (0-100 Weight %) can be given, and the program will calculate the physical properties of the solution. The MINIMUM EQUIPMENT CONFIGURATION required by 'AGA': a) DOS version: 1) An IBM PC, XT, AT or compatible computer 2) 256 K or more of RAM memory 3) DOS 2.0 or later operating system b) Windows version: 1) A computer with 80386 processor or better (486, Pentium) 2) 4 MB of RAM memory 3) Windows 3.+ To order send a check for $19.95 to: B. K. Berge, 206 Cliff Ave., Valley Springs, SD 57068 Compuserve: 101653,3544 Internet: 101653.3544@compuserve.com