README.TXT

J-WORKS is copyrighted and must be licensed for use past the initial 
evaluation period.
 
J-Works is a Windows based residential load calculation program. Heating/cooling 
multipliers weather data for over 750 cities is included.

Hardware/Software requirements: Windows 3.1 or Windows 95. 8M RAM, 6.5M Hard 
drive free. J-Works runs best on a 486 or Pentium computer.

To install J-Works:
1. unzip the zip file into a temporary directory.
2. From Program manager use the run command to run
   the file SETUP.EXE.
3. The setup program will guide you from there,
   creating Program group and installing files.
4. To start the J-Works, click on the J-Works icon in the J-Works program group.

Consult the online Windows help file after installation for details on 
registering J-Works. Reg. Fee: $149.50

Note: If you encounter problems running J-Works in Windows 3.1, go to 
file manager and search for REG.DAT.  This file should be 64K or less.  
Should this file be 64K or greater follow this procedure:
Exit out of J-Works and delete the Jworks directory.
 
1. Rename REG.DAT to REGDAT.OLD
2. Restart Windows(A new REG.DAT will be created)
3. Go to File Manager and Search for *.REG
4. OLE2.REG and SETUP.REG should be listed
5. Double click on each of these files.  Each time you should recieve a 
   verification that the file has been registered in the registration database.
   (If it says these files are not associated with any program, click on File and 
   Associate and chose Registration(REGEDIT.EXE) to associate .REG files with.
   Then double-click on OLE2.REG and then on SETUP.REG to register them.)
6. Reinstall J-Works.
7. This should correct problems running J-Works.

If you have questions regarding the installation or use of J-Works, 
you may send email to jworkswin@aol.com.  MicroWorks also has a support forum 
on the Microsoft Network (GO MicroWorks).

------UpDate Version Summary----------------------------------------------------

Vers.   Improvement
----- 	------------------------------------------------------------------------
4.0	Original version

4.1	Simplified procedure for entering Ceiling and Floor areas in Room Screen.  
	Menu item added. "New Design" allows users to begin another load without
	  having to exit the program.
	Fixed some minor bugs.
	Updated web site address to new site URL.
	Updated Help file to reflect these changes.

4.11	Save File menu option activated.  Can type a filename and extension is added.
	Corrects Summary Sheet graphics redraw problem.
	Newer Spread.DLL used.

4.11a	Fixes Ceiling/Floor Worksheet problem with accurately transferring information.
	This was a problem with more than one room loads.
	Corrected the spelling of "Opennings" to "Openings" on Summary Report.
	Corrected Reset of Skylight section.
	Changed label of Wall Ft. to Wall1 Ft. on Room screen.
	Reordered Items om top of Room screen.
	Updated Version to 4.11a.

4.12	Fixed zip code printing in the "Design By" section of Site Screen.
	Changed "Conditioned Area" in Duct Section of Other Considerations Screen.
	Enabled use of Calculator for figuring Overall Square Feet and 
	  Total Window and Door area.
	Corrected spelling of a city in database.
	Updated J-Works Help file.
	Updated About Box and Splash title screen to reflect version 4.12.

4.13	Added CFM Calculator
	Added ability to include additional wall area in zones
	Added support for Mobile Home load calculations
	Modified the Search VCR controls
	Modified Report Summary to better display the bottom scroll bar
	Added CFM column to the Summary Report
	Updated the J-Works Help file
	Updated About box and Title screen