This document lists some of the popular modem's startup strings and dip-switch settings. In order, the modems covered here are: - US Robotics Courier HST "Dual Standard" - Hayes V-Series (older V42 modems) - Multitech 224E(h) - Hayes 2400 - Multitech 9600 baud V.32 modem - Intel 14.4 - Practical Peripherals PM14400FXSA - Zoom v.32bis - Supra 9600 - Boca 144 - Hayes Optima 144 - Telebit QBlazer - US Robotics Sportster - Zoom v.32bis Be sure to read the closing notes at the end of this document!! It explains how to set up most any modem. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - =========================================== = = = US Robotics Courier HST "Dual Standard" = = = =========================================== LARGE switch labeled CTS: UP The 10 dipswitches next to that large switch are as follows: Switch# Setting 1 UP 2 DOWN 3 DOWN 4 DOWN 5 UP 6 UP 7 UP 8 DOWN 9 DOWN 10 UP The following is the configuration parms for the STARTUP.x file: YMODEMG: N ; Allow Ymodem-G for non error-correcting modems? (Y/N) VERBOSE_CONNECT: CONNECT BAUDRATE: 57600 ; 110,150,300,600,1200,2400,4800,9600,19200,38400,57600,1152 PARITY: n ; N,E,O,M, or S (None,Even,Odd,Mark,Space) DATABITS: 8 ; 5, 6, 7, or 8 STOPBITS: 1 ; 1, 1.5, or 2 WAITCARRIER: 40 ; 1 to 255 seconds MODEMRESET: AT Z ; Usually AT Z STARTUP1: AT &F1 M0 &K3 S2=255 S7=40 &W ; Modem Startup Command STARTUP2: ; Modem Startup Command STARTUP3: ; Modem Startup Command REINIT: AT Z ; Modem Reinitialization string DELAY1: 1000 ; Modem Delay 1 DELAY2: 100 ; Modem Delay 2 DELAY3: 100 ; Modem Delay 3 DTELOCKED: y ; y=Lock DTE at BAUDRATE, n=do not lock ANSWERTYPE: r ; r=ring detect, a=autoanswer, d=DCD OPENMODE: n ; s=shared mode, n=nonshared mode ANSWERCMD: ATA ; Modem answer command ONHOOK: ATH0 ; Modem command to go onhook (hangup) OFFHOOK: ATM0H1 ; Modem command to go offhook ESC_CMDMODE: +++ ; Escape Command (enter cmd mode) ESC_GRDTIME: 700 ; Escape Command Guard Time (ms) GO_ONLINE: AT O ; Go back online (leave ESC_CMD) END_OFFHOOK: Y ; Place phone offhook at MBBS termination (y=yes,n=no) ERRORCHECK: n ; y=error correcting (EC) modem (ie: MNP/ARQ), n=none - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ================== = = = Hayes V-Series = = = ================== VERBOSE_CONNECT: CARRIER BAUDRATE: 38400 ; 110,150,300,600,1200,2400,4800,9600, or 19200 PARITY: n ; N,E,O,M, or S (None,Even,Odd,Mark,Space) DATABITS: 8 ; 5, 6, 7, or 8 STOPBITS: 1 ; 1, 1.5, or 2 WAITCARRIER: 30 ; 1 to 255 seconds MODEMRESET: AT Z0 ; Usually AT Z STARTUP1: AT &F ; Modem Startup Command STARTUP2: AT E1M1L1Q0V1X4B1N1W1Y1S7=30S0=0S2=255S36=3S37=9 ; Modem Startup Command STARTUP3: AT S10=3S38=2&C1&D2&G0&K3&P0&Q5&R1&S1&Y0&W0 ; Modem Startup Command REINIT: AT Z0 ; Modem Reinitialization string DELAY1: 1000 ; Modem Delay 1 DELAY2: 2000 ; Modem Delay 2 DELAY3: 2000 ; Modem Delay 3 DTELOCKED: y ; y=Lock DTE at BAUDRATE, n=do not lock ANSWERTYPE: r ; r=ring detect, a=autoanswer OPENMODE: n ; s=shared mode, n=nonshared mode ANSWERCMD: ATA ; Modem answer command ONHOOK: ATH0 ; Modem command to go onhook (hangup) OFFHOOK: ATH1 ; Modem command to go offhook ESC_CMDMODE: +++ ; Escape Command (enter cmd mode) ESC_GRDTIME: 700 ; Escape Command Guard Time (ms) GO_ONLINE: AT O ; Go back online (leave ESC_CMD) END_OFFHOOK: N ; Place phone offhook at MBBS termination (y=yes,n=no) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ===================== = = = MultiTech 224E(h) = = = ===================== The dip-switch settings for this modem are as follows: The 8-switch block on the bottom of the modem: Switch# Setting 1 UP 2 DOWN 3 DOWN 4 DOWN 5 DOWN 6 UP 7 UP 8 DOWN The 4-switch block on the inside of the modem: Switch# Setting 1 DOWN 2 UP 3 DOWN 4 DOWN All jumpers on the inside of the modem (there's 3 of them) should be jumpered towards the front two pins. The front is the side where the modem lights are. The following is the configuration parameters for your STARTUP.x file: YMODEMG: N ; Allow Ymodem-G for non error-correcting modems? (Y/N) BAUDRATE: 9600 ; 110,150,300,600,1200,2400,4800,9600,19200,38400,57600 PARITY: n ; N,E,O,M, or S (None,Even,Odd,Mark,Space) DATABITS: 8 ; 5, 6, 7, or 8 STOPBITS: 1 ; 1, 1.5, or 2 WAITCARRIER: 30 ; 1 to 255 seconds MODEMRESET: AT Z ; Usually AT Z STARTUP1: AT &F ; Modem Startup Command STARTUP2: AT E0&E1&E4&E15&Q0V0M0S7=30X1S2=255 ; Modem Startup Command STARTUP3: AT S0=0&BS0&B1$SB9600$BA0&W0 ; Modem Startup Command REINIT: AT Z ; Modem Reinitialization string DELAY1: 500 ; Modem Delay 1 DELAY2: 2500 ; Modem Delay 2 DELAY3: 1500 ; Modem Delay 3 DTELOCKED: y ; y=Lock DTE at BAUDRATE, n=do not lock ANSWERTYPE: r ; r=ring detect, a=autoanswer, d=DCD OPENMODE: n ; s=shared mode, n=nonshared mode ANSWERCMD: ATA ; Modem answer command ONHOOK: ATH0 ; Modem command to go onhook (hangup) OFFHOOK: ATH1 ; Modem command to go offhook ESC_CMDMODE: +++ ; Escape Command (enter cmd mode) ESC_GRDTIME: 700 ; Escape Command Guard Time (ms) GO_ONLINE: AT O ; Go back online (leave ESC_CMD) END_OFFHOOK: N ; Place phone offhook at MBBS termination (y=yes,n=no) RC_110: ; Result Code for 110 baud RC_150: ; Result Code for 150 baud RC_300: 1 ; Result Code for 300 baud RC_600: ; Result Code for 600 baud RC_1200: 5 ; Result Code for 1200 baud RC_2400: 9 ; Result Code for 2400 baud RC_4800: ; Result Code for 4800 baud RC_9600: ; Result Code for 9600 buad RC_12000: ; Result Code for 12000 baud RC_14400: ; Result Code for 14400 baud RC_16800: ; Result Code for 16800 baud RC_19200: ; Result Code for 19200 baud ERRORCHECK: y ; y=error correcting (EC) modem (ie: MNP/ARQ), n=none ERC_110: ; EC Result Code for 110 baud ERC_150: ; EC Result Code for 150 baud ERC_300: ; EC Result Code for 300 baud ERC_600: ; EC Result Code for 600 baud ERC_1200: 5R ; EC Result Code for 1200 baud ERC_2400: 9R ; EC Result Code for 2400 baud ERC_4800: ; EC Result Code for 4800 baud ERC_9600: ; EC Result Code for 9600 baud ERC_12000: ; EC Result Code for 12000 baud ERC_14400: ; EC Result Code for 14400 baud ERC_16800: ; EC Result Code for 16800 baud ERC_19200: ; EC Result Code for 19200 baud - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ============== = = = Hayes 2400 = = = ============== VERBOSE_CONNECT: CONNECT BAUDRATE: 2400 PARITY: n DATABITS: 8 STOPBITS: 1 WAITCARRIER: 30 MODEMRESET: STARTUP1: AT &F&W STARTUP2: AT S10=7E0V1M0Q0&C1&D2S0=1&W STARTUP3: REINIT: DELAY1: 1500 DELAY2: 1500 DELAY3: 2500 DTELOCKED: n ANSWERTYPE: a OPENMODE: n ANSWERCMD: ATA ONHOOK: ATH0 OFFHOOK: ATH1 ESC_CMDMODE: +++ ESC_GRDTIM: 700 GO_ONLINE: AT O END_OFFHOOK: N ERRORCHECK: n - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ================================== = = = Multitech 9600 baud V.32 modem = = = ================================== The dip-switch settings for this modem are as follows: The 4-switch block: Switch# Setting 1 DOWN 2 UP 3 DOWN 4 DOWN The 8-switch block: Switch# Setting 1 UP 2 DOWN 3 DOWN 4 DOWN 5 UP 6 UP 7 UP 8 DOWN Startup Sequences: BAUDRATE: 19200 PARITY: n DATABITS: 8 STOPBITS: 1 WAITCARRIER: 30 MODEMRESET: AT Z STARTUP1: AT &F STARTUP2: AT E0 &E1 &E4 &E15 $SB19200 $BA0 &R1 STARTUP3: AT V0 M1 Q0 X1 S0=1 S2=255 S7=30 &W0 REINIT: AT Z DELAY1: 1000 DELAY2: 1500 DELAY3: 1500 DTELOCKED: y ANSWERTYPE: a OPENMODE: n ANSWERCMD: ATA ONHOOK: ATH0 OFFHOOK: ATH1 ESC_CMDMODE: +++ ESC_GRDTIME: 1200 GO_ONLINE: AT O END_OFFHOOK: N RC_110: RC_150: RC_300: 1 RC_600: RC_1200: 5 RC_2400: 9 RC_4800: 11 RC_9600: 12 RC_19200: ERRORCHECK: y ERC_110: ERC_150: ERC_300: 1R ERC_600: ERC_1200: 5R ERC_2400: 9R ERC_4800: 11R ERC_9600: 12R ERC_19200: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ==================== = = = Intel 14.4 modem = = = ==================== ; ; ; Magnum BBS Config Parms for Intel 14,400 baud Modem ; ; YMODEMG: Y ; Allow Ymodem-G for non error-correcting modems? (Y/N) ; VERBOSE_CONNECT: CONNECT ; Usually CONNECT or CARRIER ; BAUDRATE: 38400 ; 110,150,300,600,1200,2400,4800,9600,19200,38400 PARITY: n ; N,E,O,M, or S (None,Even,Odd,Mark,Space) DATABITS: 8 ; 5, 6, 7, or 8 STOPBITS: 1 ; 1, 1.5, or 2 WAITCARRIER: 30 ; 1 to 255 seconds MODEMRESET: AT Z ; Usually AT Z STARTUP1: AT Z ; Modem Startup Command STARTUP2: AT E0&Q0V1M1Q0S7=30X1L0 ; Modem Startup Command STARTUP3: AT S0=1S2=255&R1&C1&W0 ; Modem Startup Command REINIT: AT Z ; Modem Reinitialization string DELAY1: 1200 ; Modem Delay 1 DELAY2: 1200 ; Modem Delay 2 DELAY3: 1200 ; Modem Delay 3 DTELOCKED: y ; y=Lock DTE at BAUDRATE, n=do not lock ANSWERTYPE: a ; r=ring detect, a=autoanswer OPENMODE: n ; s=shared mode, n=nonshared mode ANSWERCMD: ATA ; Modem answer command ONHOOK: ATH0 ; Modem command to go onhook (hangup) OFFHOOK: ATM0H1 ; Modem command to go offhook ESC_CMDMODE: +++ ; Escape Command (enter cmd mode) ESC_GRDTIME: 700 ; Escape Command Guard Time (ms) GO_ONLINE: AT O ; Go back online (leave ESC_CMD) END_OFFHOOK: Y ; Place phone offhook at MBBS termination (y=yes,n=no) ERRORCHECK: n ; y=error correcting (EC) modem (ie: MNP/ARQ), n=none - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ============================================ = = = Practical Peripherals PM 14400FXSA Modem = = = ============================================ ; ; ; Magnum BBS Config Parms for Practical Peripherals PM14400FXSA External Modem ; ; YMODEMG: Y ; Allow Ymodem-G for non error-correcting modems? (Y/N) ; VERBOSE_CONNECT: CONNECT ; Usually CONNECT or CARRIER ; BAUDRATE: 38400 ; 110,150,300,600,1200,2400,4800,9600,19200,38400 PARITY: n ; N,E,O,M, or S (None,Even,Odd,Mark,Space) DATABITS: 8 ; 5, 6, 7, or 8 STOPBITS: 1 ; 1, 1.5, or 2 WAITCARRIER: 30 ; 1 to 255 seconds MODEMRESET: AT Z1 ; Usually AT Z STARTUP1: AT &F1M1L0 ; Modem Startup Command STARTUP2: AT Q0V1S7=30X1S0=0S2=255W2S37=11N1S38=0 ; Modem Startup Command STARTUP3: AT &C1&D3&K3&Q5&Y1&W1 ; Modem Startup Command REINIT: AT Z1 ; Modem Reinitialization string DELAY1: 1200 ; Modem Delay 1 DELAY2: 1200 ; Modem Delay 2 DELAY3: 1200 ; Modem Delay 3 DTELOCKED: y ; y=Lock DTE at BAUDRATE, n=do not lock ANSWERTYPE: r ; r=ring detect, a=autoanswer OPENMODE: n ; s=shared mode, n=nonshared mode ANSWERCMD: ATA ; Modem answer command ONHOOK: ATH0 ; Modem command to go onhook (hangup) OFFHOOK: ATM0H1&D2 ; Modem command to go offhook ESC_CMDMODE: +++ ; Escape Command (enter cmd mode) ESC_GRDTIME: 700 ; Escape Command Guard Time (ms) GO_ONLINE: AT O ; Go back online (leave ESC_CMD) END_OFFHOOK: Y ; Place phone offhook at MBBS termination (y=yes,n=no) ERRORCHECK: n ; y=error correcting (EC) modem (ie: MNP/ARQ), n=none - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ====================== = = = Zoom v.32bis modem = = = ====================== ; ; ; Magnum BBS Config Parms for Zoom v.32bis Modem ; ; YMODEMG: Y ; Allow Ymodem-G for non error-correcting modems? (Y/N) ; VERBOSE_CONNECT: CONNECT ; Usually CONNECT or CARRIER ; BAUDRATE: 38400 ; 110,150,300,600,1200,2400,4800,9600,19200,38400 PARITY: n ; N,E,O,M, or S (None,Even,Odd,Mark,Space) DATABITS: 8 ; 5, 6, 7, or 8 STOPBITS: 1 ; 1, 1.5, or 2 WAITCARRIER: 30 ; 1 to 255 seconds MODEMRESET: AT Z0 ; Usually AT Z STARTUP1: AT B1N1V1W1X4 STARTUP2: AT &C1&D2&K3&Q5&R0&S0&X2 STARTUP3: AT S7=30S36=7S46=136S48=7&Y0&W0 REINIT: AT Z0 ; Modem Reinitialization string DELAY1: 1200 ; Modem Delay 1 DELAY2: 1200 ; Modem Delay 2 DELAY3: 1200 ; Modem Delay 3 DTELOCKED: y ; y=Lock DTE at BAUDRATE, n=do not lock ANSWERTYPE: r ; r=ring detect, a=autoanswer OPENMODE: n ; s=shared mode, n=nonshared mode ANSWERCMD: ATA ; Modem answer command ONHOOK: ATH0 ; Modem command to go onhook (hangup) OFFHOOK: ATM0H1&D2 ; Modem command to go offhook ESC_CMDMODE: +++ ; Escape Command (enter cmd mode) ESC_GRDTIME: 700 ; Escape Command Guard Time (ms) GO_ONLINE: AT O ; Go back online (leave ESC_CMD) END_OFFHOOK: Y ; Place phone offhook at MBBS termination (y=yes,n=no) ERRORCHECK: n ; y=error correcting (EC) modem (ie: MNP/ARQ), n=none - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ============== = = = Supra 9600 = = = ============== YMODEMG: N ; Allow Ymodem-G for non error-correcting modems? (Y/N) VERBOSE_CONNECT: CARRIER ; Usually CONNECT or CARRIER BAUDRATE: 19200 ; 110,150,300,600,1200,2400,4800,9600,19200,38400,57600 PARITY: n ; N,E,O,M, or S (None,Even,Odd,Mark,Space) DATABITS: 8 ; 5, 6, 7, or 8 STOPBITS: 1 ; 1, 1.5, or 2 WAITCARRIER: 30 ; 1 to 255 seconds MODEMRESET: ; Usually AT Z STARTUP1: AT &F2 %C0 &D2 ; Modem Startup Command STARTUP2: AT &C1 V1 M0 Q W1 ; Modem Startup Command STARTUP3: AT S0=1 ; Modem Startup Command REINIT: ; Modem Reinitialization string DELAY1: 1500 ; Modem Delay 1 DELAY2: 1500 ; Modem Delay 2 DELAY3: 1500 ; Modem Delay 3 DTELOCKED: y ; y=Lock DTE at BAUDRATE, n=do not lock ANSWERTYPE: a ; r=ring detect, a=autoanswer, d=DCD OPENMODE: n ; s=shared mode, n=nonshared mode ANSWERCMD: ATA ; Modem answer command ONHOOK: ATH0 ; Modem command to go onhook (hangup) OFFHOOK: ATH1 ; Modem command to go offhook ESC_CMDMODE: +++ ; Escape Command (enter cmd mode) ESC_GRDTIME: 1000 ; Escape Command Guard Time (ms) GO_ONLINE: AT O ; Go back online (leave ESC_CMD) END_OFFHOOK: Y ; Place phone offhook at MBBS termination (y=yes,n=no) ERRORCHECK: n ; y=error correcting (EC) modem (ie: MNP/ARQ), n=none - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - =========== = = = BOCA144 = = = =========== YMODEMG: N ; Allow Ymodem-G for non error-correcting modems? (Y/N) VERBOSE_CONNECT: CONNECT ; Usually CONNECT or CARRIER BAUDRATE: 38400 ; 110,150,300,600,1200,2400,4800,9600,19200,38400,57600 PARITY: n ; N,E,O,M, or S (None,Even,Odd,Mark,Space) DATABITS: 8 ; 5, 6, 7, or 8 STOPBITS: 1 ; 1, 1.5, or 2 WAITCARRIER: 60 ; 1 to 255 seconds MODEMRESET: AT Z ; Usually AT Z STARTUP1: AT &F ; Modem Startup Command STARTUP2: AT E1 S7=60 S11=60 V1 X1 Q0 S0=0 &W ; Modem Startup Command STARTUP3: ; Modem Startup Command REINIT: AT Z ; Modem Reinitialization string DELAY1: 1000 ; Modem Delay 1 DELAY2: 1000 ; Modem Delay 2 DELAY3: 100 ; Modem Delay 3 DTELOCKED: y ; y=Lock DTE at BAUDRATE, n=do not lock ANSWERTYPE: r ; r=ring detect, a=autoanswer, d=DCD OPENMODE: n ; s=shared mode, n=nonshared mode ANSWERCMD: ATA ; Modem answer command ONHOOK: ATH0 ; Modem command to go onhook (hangup) OFFHOOK: ATH1 ; Modem command to go offhook ESC_CMDMODE: +++ ; Escape Command (enter cmd mode) ESC_GRDTIME: 1000 ; Escape Command Guard Time (ms) GO_ONLINE: AT O ; Go back online (leave ESC_CMD) END_OFFHOOK: Y ; Place phone offhook at MBBS termination (y=yes,n=no) ERRORCHECK: n ; y=error correcting (EC) modem (ie: MNP/ARQ), n=none - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ==================== = = = HAYES OPTIMA 144 = = = ==================== YMODEMG: N ; Allow Ymodem-G for non error-correcting modems? (Y/N) VERBOSE_CONNECT: CONNECT ; Usually CONNECT or CARRIER BAUDRATE: 38400 ; 110,150,300,600,1200,2400,4800,9600,19200,38400,57600 PARITY: n ; N,E,O,M, or S (None,Even,Odd,Mark,Space) DATABITS: 8 ; 5, 6, 7, or 8 STOPBITS: 1 ; 1, 1.5, or 2 WAITCARRIER: 40 ; 1 to 255 seconds MODEMRESET: AT Z0 ; Usually AT Z STARTUP1: AT &F ; Modem Startup Command STARTUP2: AT V1L1&C1&D2W2S7=40S95=2S2=255S38=1&Y0&W0 ; Startup Command STARTUP3: ; Modem Startup Command REINIT: AT Z0 ; Modem Reinitialization string DELAY1: 1000 ; Modem Delay 1 DELAY2: 2500 ; Modem Delay 2 DELAY3: 100 ; Modem Delay 3 DTELOCKED: y ; y=Lock DTE at BAUDRATE, n=do not lock ANSWERTYPE: r ; r=ring detect, a=autoanswer, d=DCD OPENMODE: n ; s=shared mode, n=nonshared mode ANSWERCMD: ATA ; Modem answer command ONHOOK: ATH0 ; Modem command to go onhook (hangup) OFFHOOK: ATH1 ; Modem command to go offhook ESC_CMDMODE: +++ ; Escape Command (enter cmd mode) ESC_GRDTIME: 1000 ; Escape Command Guard Time (ms) GO_ONLINE: AT O ; Go back online (leave ESC_CMD) END_OFFHOOK: Y ; Place phone offhook at MBBS termination (y=yes,n=no) ERRORCHECK: n ; y=error correcting (EC) modem (ie: MNP/ARQ), n=none - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - =================== = = = TELEBIT QBLAZER = = = =================== The STARTUP strings on file for this modem are: WAITCARRIER: 40 MODEMRESET: AT Z0 STARTUP1: AT &F STARTUP2: AT E1V1Q0X2S0=2S51=4 STARTUP3: AT &C1&D2S58=2S59=15&W0 REINIT: AT Z0 DELAY1: 1000 DELAY2: 1000 DELAY3: 1000 DTELOCKED: y ANSWERTYPE: a - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ========================= = = = US Robotics Sportster = = = ========================= The 8 dipswitch settings are: Switch# Setting 1 UP 2 UP 3 DOWN 4 UP 5 DOWN 6 UP 7 UP 8 DOWN YMODEMG: N ; Allow Ymodem-G for non error-correcting modems? (Y/N) VERBOSE_CONNECT: CONNECT BAUDRATE: 57600 ; 110,150,300,600,1200,2400,4800,9600,19200,38400,57600,1152 PARITY: n ; N,E,O,M, or S (None,Even,Odd,Mark,Space) DATABITS: 8 ; 5, 6, 7, or 8 STOPBITS: 1 ; 1, 1.5, or 2 WAITCARRIER: 45 ; 1 to 255 seconds MODEMRESET: AT Z ; Usually AT Z STARTUP1: AT &F ; Modem Startup Command STARTUP2: AT Q0V1X4B0S7=45S0=0S2=255S15=8S10=14; Modem Startup Command STARTUP3: AT &A3&B1&H1&I0&K3&M4&N0&R2&S0&Y1&W ; Modem Startup Command REINIT: AT Z ; Modem Reinitialization string DELAY1: 2500 ; Modem Delay 1 DELAY2: 2500 ; Modem Delay 2 DELAY3: 2500 ; Modem Delay 3 DTELOCKED: y ; y=Lock DTE at BAUDRATE, n=do not lock ANSWERTYPE: r ; r=ring detect, a=autoanswer, d=DCD - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ================ = = = ZOOM v.32bis = = = ================ YMODEMG: N ; Allow Ymodem-G for non error-correcting modems? (Y/N) VERBOSE_CONNECT: CONNECT ; Usually CONNECT or CARRIER BAUDRATE: 38400 ; 110,150,300,600,1200,2400,4800,9600,19200,38400,57600 PARITY: n ; N,E,O,M, or S (None,Even,Odd,Mark,Space) DATABITS: 8 ; 5, 6, 7, or 8 STOPBITS: 1 ; 1, 1.5, or 2 WAITCARRIER: 40 ; 1 to 255 seconds MODEMRESET: AT Z ; Usually AT Z STARTUP1: AT &F ; Modem Startup Command STARTUP2: AT V1B1N1W1X4&C1&D2&K3&Q5&R0&S0&X2 ; Startup Command STARTUP3: AT S0=0 S7=40 S36=7 S46=136 S48=7 &Y0 &W0 ; Modem Startup Command REINIT: AT Z ; Modem Reinitialization string DELAY1: 1000 ; Modem Delay 1 DELAY2: 2500 ; Modem Delay 2 DELAY3: 2000 ; Modem Delay 3 DTELOCKED: y ; y=Lock DTE at BAUDRATE, n=do not lock ANSWERTYPE: r ; r=ring detect, a=autoanswer, d=DCD OPENMODE: n ; s=shared mode, n=nonshared mode ANSWERCMD: ATA ; Modem answer command ONHOOK: ATH0 ; Modem command to go onhook (hangup) OFFHOOK: ATH1 ; Modem command to go offhook ESC_CMDMODE: +++ ; Escape Command (enter cmd mode) ESC_GRDTIME: 1000 ; Escape Command Guard Time (ms) GO_ONLINE: AT O ; Go back online (leave ESC_CMD) END_OFFHOOK: Y ; Place phone offhook at MBBS termination (y=yes,n=no) ERRORCHECK: n ; y=error correcting (EC) modem (ie: MNP/ARQ), n=none =========================================================================== IMPORTANT! CLOSING NOTES. Modem models change very fast! For the fastest possible setup for any modem, once you've filled in your STARTUPx strings, use Verbose (word) result codes (a V1 anywhere in your STARTUP strings should turn on verbose result codes). Then: VERBOSE_CONNECT: CONNECT (Some Hayes models may need VERBOSE_CONNECT: CARRIER) YMODEMG: N and delete all text lines starting with RC_, ERC_, ERCA_, ERCB_ if any of these appear in your STARTUP.n file(s). Additionally, create a SPECIAL.x (x=node#) file in your PGM_DIR for that node. The contents should be: ARQ { ec } MNP { ec } LAP { ec } CONNECT { log } ===========================================================================