Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 2034 Date: 01-30-93 13:48 From: Philipp Lange Read: Yes Replied: No To: David Silver Mark: Subj: CD ROM and SBBS1.16B ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Philipp Lange drooled this drivel to David Silver about CD ROM and SBBS1.16B on 01-30-93 13:48 <=- PL> Hi David! PL> 28 Jan 93, David Silver schreibt an Philipp Lange: DS> You are correct. It is the attempted updating of the download counters DS> that causes the hang up. Aki is WELL aware of it and, we've been informed DS> by Len Morgan, that CDROM compatibility is number one on his (Aki's) list DS> for the 1.17 release. PL> Hmmm. CDROM compatibility is okay and fine. But the problem CD ROM PL> users are experiencing now is not a matter of a missing option but a PL> matter of a major bug. As I said, why does SBBS find correctly the PL> path to my CD-ROM-Files-BBS, respectivley Files.001- Files.050 on my PL> harddrive, for example when searching files, looking into archives, PL> etc. but then skips the information of the correct path and tries to PL> write on the CD? I hope I can make myself understood :-) SBBS takes PL> everything from the correct files.bbs but only after Downloads it PL> tries to freshen up the wrong Files.BBS.... PL>> My second problem is probably easier to solve. Since downloading via PL>> SBBS from CD-ROM should not be allowed, I had to work it out, that a PL>> global download would have only access to my fileareas on the PL>> harddisk. Therefore I disabled in the filearea configuration all PL>> Options with 'Download allowed', but nonetheless, the user had still PL>> the possibility to perform a global download with the CD-ROM areas PL>> included.... DS> There really is no need to do this. EFT and SBBS can share the same DS> files.bbs (or whatever you have them named in your file area config) DS> without a problem. You don't need to enable the special EFT CDROM area DS> options unless you want to. My users have the choice of downloading CDROM DS> files directly from the BBS or EFT. PL> Huh? But if a user performs a download (no matter global or from the PL> current area) from a CD, SBBS hangs up. The one and only way I found PL> yet, was to use EFT - so I had to disable the global download option PL> built-in SBBS. DS> Both options work like a charm. Now, DS> to speed up CDROM file finds, a goodly amount of available expanded memory DS> comes in very handy. My MSCDEX line in my autoexec.bat is: DS> c:\qemm\loadhi /r:2 C:\dos\MSCDEX.EXE /D:MSCD010 /L:H /E /M:256 /V PL> Thank You!! I will try that! DS> I use QEMM to load it high to begin with and give it a 512k buffer to DS> store the dir/file names into - using the last command in autoexec.bat: DS> wis h:xan_*.* PL> This one I don't understand. PL> Wis = name of the utility? PL> h = Drive ? PL> xan_*.* ? PL> Hmm. sounds interesting. Tell me the full name of the utility and I PL> will request it. But, please, explain it to me again... PL> Hmm. With filerequest I found another solution: I took every file from PL> the CD-ROM in the magiclist. Now FrontDoor finds the file much faster, PL> but the disadvantage is, that Frequest with Wildcards are not possible PL> anymore...:-( DS> Hopefully, you'll find some of this info useful. Everything works fine DS> here with this setup. As I have a total of 4 CDROM drives online, I had DS> the "option" of donating a 2meg buffer to MSCDEX and searching for all DS> files on all CDs prior to DV calling up the BBS, or, using a file door. PL> ??? I don't get this either (shame on me...). I thought you use EFT as PL> a File Door (or is there a difference between FileDoor and File PL> Transfer Door?). And why are you running it before starting DesqView? PL> I don't understand the use of it (sorry...). DS> I went for the latter and STRONGLY recommend using ACFILES. It is (in my DS> estimation) the most full featured bang for the buck (all of 15 bucks to DS> register) file transfer program I've ever come across. If anything I've DS> written is unclear, please feel free to point it/them out to me and I'll DS> be happy to clarify. PL> Yes, please to reply.... What exactly now is ACFILES.... When does the PL> update with the CDROM compatibiliy come out.... Will I get rich and PL> famous ... Where is my Installation Disk.... Will I stop asking stupid PL> questions? PL> You see, lots of questions :-)))) PL> Bis denn, Philipp PL> -!- NwF 1/c PL> ! Origin: Die Schotterbox Passau (Tel: 0851 - 75 30 94) (2:246/245) PL> 1 Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 2030 Date: 01-28-93 16:54 From: Tim Smith Read: Yes Replied: No To: Jon Greaves Mark: Subj: Re: CD Rom/SBBS/Tagging ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Tim Smith drooled this drivel to Jon Greaves about Re: CD Rom/SBBS/Tagging on 01-28-93 16:54 <=- -=> Quoting Jon Greaves to Scott Amerland <=- JG> Greetings Scott! JG> Monday January 18 1993, Scott Amerland writes to Jon Greaves: SA> 8-)I have implemented the suggestions (caching with the CD Rom SA> 8-)device driver) and file tagging now takes under 11 sec's (was 45 SA> How did you do that? I am having the same problems with the 45 seconds or SA> better on tags... Thanks for your help... JG> I just added the following line to my autoexec.bat (the /m parameter JG> is the important one), I required a meg of cache (EMS) to allow for JG> the size of the CD, you may be able to get away with less. From a JG> reboot the cache is empty so I use a filefinder to locate a file in JG> the last area of the bbs (to fill the cache). My CD has a VERY slow JG> seek time (its a Mitsumi), you might find a quicker responce on your JG> system. JG> [autoexec.bat] JG> c:\dos\MSCDEX.EXE /D:MSCD001 /M:1024 /E /V TS> ^^^^^^^ TS> Aaaaa, This sets a 2 meg cache. TS> each number is 2k, 512 would be a 1 TS> meg cache. TS> ... Boldly going forward because we simply can't find reverse TS> -!- Blue Wave/SBBS v2.10 [NR] TS> ! Origin: Bob's Bulldog Express..On The Cutting Edge! (1:110/380.0) TS> 1 Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 1029 Date: 01-26-93 22:59 From: Laurence Forbes Read: Yes Replied: No To: Jeremy Browne Mark: Subj: Limits ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Laurence Forbes drooled this drivel to Jeremy Browne about Limits on 01-26-93 22:59 <=- LF> .:|:. In a message to All on 18-01-93 from Jeremy Browne: JB> Can anyone suggest why my SBBS 1.16b has suddenly taken to JB> giving people 15000 minutes time in the TL entry on the status JB> bar, irrespective what security level they have? Only Sysop is JB> configured for this while all the rest are 1 hour or less! JB> LF> Hi Jeremy, LF> Check that you have those security level describe in your LF> LIMITS.BBS file. This is done via the Config file. LF> It could have been that you accidentially wiped out these security LF> level while doing some manual maintenance. LF> If the security level doesn't exist, SBBS will give them access to LF> the highest security level ... being your SysOp security level. LF> Laurence |:-) LF> LF> -!- FMail 0.92+ LF> ! Origin: Neighbourhood BBS - Victoria, Australia +613-434-6348 LF> (3:633/254) 1 Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 749 Local Date: 01-30-93 18:34 From: Len Morgan Read: Yes Replied: No To: Mark Billinge Mark: Subj: Name Changing ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Len Morgan drooled this drivel to Mark Billinge about Name Changing on 01-30-93 18:34 <=- LM> Hello Mark, LM> Friday January 22 1993, Mark Billinge writes to All: MB> Is there some way I can get my BBS name changed and not have to MB> re-register SBBS? I'm fed up with the current name... LM> If possible, contact the registration site from whom you registered, LM> if not, any registration site and submit the following: LM> 1. The name you registered as sysop. LM> 2. Your key code number. LM> 3. Your Old BBS name. LM> 4. The New BBS name. LM> Len LM> -!- GoldED 2.40+ LM> ! Origin: SBBS - Zone 1 Reg/Supt Site Coordinator (916) 920-1288 LM> (1:203/730) Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 782 Local Date: 02-03-93 18:31 From: Len Morgan Read: Yes Replied: No To: All Mark: Subj: BBS Name Change ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Len Morgan drooled this drivel to All about BBS Name Change on 02-03-93 18:31 <=- LM> Hello All, LM> Any user who wishes to change the name of their bbs, may do so by LM> submitting the request to your (or any) registration site. You will LM> need to submit a handling fee of $5, your old bbs name, new bbs name LM> (exactually as you want it spelled, and your bbs name will be changed. LM> No sysop name changes are permitted. The turn around time is from 7 LM> to 14 days. LM> Len LM> -!- GoldED 2.41.B0108+ LM> ! Origin: SBBS Western U.S. Reg/Support Site (916) 920-1288 LM> (1:203/730) Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 1217 Date: 01-31-93 16:58 From: Frank Hemmelder Read: Yes Replied: No To: Tom Scott Mark: Subj: Scaning For Viruses In Sb ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Frank Hemmelder drooled this drivel to Tom Scott about Scaning For Viruses In Sb on 01-31-93 16:58 <=- TS>I have McAfee's SCAN 9.11 VER 100 online, and when I use the command in the TS>files areas to scan a file for virus's I always get a DOS ERROR 2, then it TS>says the file is ok and returns to my menu. FH> Have you setup scan to only scan executables? FH> Best methode for scan is not to put anything on the virusline in the FH> config and SBBS will use SCAN if it is in your path. But make sure FH> your TEMP and WORK dir are setup correctly. FH> CU, Frank. FH> Home of the SuperBBS docs. FH> -!- GEcho 1.00/beta+ FH> ! Origin: NNN SuperBBS - SuperNet Host NL - 31.3480.24801 FH> (2:500/239) Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 2752 Date: 02-02-93 22:01 From: David Hardinge Read: Yes Replied: No To: Tom Scott Mark: Subj: Scaning for Viruses in SBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> David Hardinge drooled this drivel to Tom Scott about Scaning for Viruses in SBBS on 02-02-93 22:01 <=- TS> Hello.. I have a question I hope someone can answer for me. TS> TS> In the Config, I first had the path to my scan.exe and then %2, TS> then I changed it to just %2 when I got that DOS ERROR 2, and DH> In my config I use: DH> c:\dos\scan.exe %1 DH> Try that, it works fine for me.... DH> David Hardinge, SysOp DH> -!- GEcho 1.00 DH> ! Origin: Typed ON-LINE at DUCK'S BBS (2:2400/850) DH> 60 Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 880 Rec'd Date: 02-04-93 19:10 From: Denny Vandemaele Read: Yes Replied: No To: Singh Khanna Mark: Subj: SBBS and Telix ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Denny Vandemaele drooled this drivel to Singh Khanna about SBBS and Telix on 02-04-93 19:10 <=- > only to SBBS. When they go to logon, they get the '+0' in the > name field. DV> It's a combination of Sbbs and Telix. DV> It is the ENQ string. You must have it set on in your sbbs config DV> under the yes/no settings: Output ^E Character NO DV> Telix just happens to be advanced enough as well as sbbs that they DV> both handle the ENQ. I used to have that problem when I logged onto DV> other SBBS boards if the sysop did not know what this option meant. DV> Hope this helps. DV> -!- FMail 0.92 DV> ! Origin: Manna From Heaven is Here Today! (616)372-9946 DV> (1:2201/24.1) 1 Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 615 Date: 02-01-93 11:48 From: Jonathan Holmes Read: Yes Replied: No To: Tom Barstow Mark: Subj: Archive Extractor ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Jonathan Holmes drooled this drivel to Tom Barstow about Archive Extractor on 02-01-93 11:48 <=- JH> *** Tom Barstow was heard whispering this to All on 26-Jan-93 *** TB> Whats a good program to look at archives in the BBS and TB> download one program from the archive. Like zipmaster but that TB> covers more than one archive? Who's got it for download? JH> 60 ³ /F ³ E ³ 5 JH> 61 ³ c:\superbbs\temp@N ³ V ³ 5 JH> 32 ³ c:\superbbs\temp@N ³ 2 ³ 5 JH> Use menu type 60 to extract file to temp directory for the current JH> line. JH> Menu type 61 : Rearchive the file(s) that you want from that archive, JH> or any other archive. JH> Menu type 32 : Download from the tempory dir. Use the @N command to JH> point to the current line temp dir in a multinode setup. JH> NO NEED for any external utilities. JH> Jonathan. JH> -!- FMail beta+ JH> ! Origin: Have you seen my BBS? It's SUPER! (3:635/570) JH> 1 Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 3499 Date: 02-05-93 21:48 From: Jeremy Browne Read: Yes Replied: No To: Brendan Keyport Mark: Subj: Bug... ?!? ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Jeremy Browne drooled this drivel to Brendan Keyport about Bug... ?!? on 02-05-93 21:48 <=- JB> * Reply to a Brendan Keyport's original msg to All on 23-Jan-93 BK> I found a interesting Bug... when I set the sbbsovr enviroment BK> varible, I get a overlay error -2... JB> Did you set the WHOLE path, INCLUDING the filename? eg JB> SET SBBSOVR=C:\SBBS\OVRSBBS.OVR JB> ?? :-) JB> Jeremy JB> -!- SuperBBS 1.16 (Reg) JB> ! Origin: Shaking Hands BBS,UK (2:252/160) JB> 60 Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 1349 Rec'd Local Date: 02-08-93 15:09 From: Len Morgan Read: Yes Replied: No To: Kelly Cruise Mark: Subj: Doors and SBBS 1.17 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Len Morgan drooled this drivel to Kelly Cruise about Doors and SBBS 1.17 on 02-08-93 15:09 <=- LM> Hello Kelly, LM> Monday February 08 1993, Kelly Cruise writes to All: KC> Okay, I know I'm messin up something somewhere, but I can't figure it out. KC> I have installed doors on my system, and I can get the screens on the KC> local system, but no go to the remote call in systems. I have re-direction KC> set to com2 where my modem is. Is there anything else I need to look at? I KC> am using a type 7 drop, and they do start. Just no video on the remote KC> end. Kel LM> Some games do not see the com port and have to have a program like LM> GATEWAY to make them output to the comport. Most games, now, are LM> writtten with the I/O direction programs to not only use the comport LM> but to sample it for baud rate. If not, the game will see the locked LM> baud rate (if any) and not the users baud rate. Your redirection to LM> com 2 doesn't affect the door, only your local video. Try using a LM> redirection program like GATEWAY. LM> Len LM> -!- GoldED 2.41.B0108+ LM> ! Origin: QST BBS Sbbs Reg/Support Site HST/DS (916) 920-1288 LM> (1:203/730) Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 3503 Date: 02-05-93 22:19 From: Jeremy Browne Read: Yes Replied: No To: Ryan Shaw Mark: Subj: hotkeys ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Jeremy Browne drooled this drivel to Ryan Shaw about hotkeys on 02-05-93 22:19 <=- RS> Is it possible to use either the or the key as a RS> hotkey? Thanks in advance for any help on this! JB> Yes, I use both - however, I don't think that SMENU or SBBSMENU allow JB> you to enter them directly - so I put a character like ^ or } or ~ JB> and after saving the menu, I change the character in hex using Norton JB> Utilities or similar, changing to hex 13 for & hex 26 for (have I remembered those values right? :-)) JB> It's very nice to use e.g to back out or to complete JB> looking at a limited-topic menu. JB> Jeremy JB> -!- SuperBBS 1.16 (Reg) JB> ! Origin: Shaking Hands BBS,UK (2:252/160) JB> 60 Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 912 Date: 02-06-93 17:29 From: Sam Wyatt Read: Yes Replied: No To: Frank Hemmelder Mark: Subj: Init Strings Modems ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Sam Wyatt drooled this drivel to Frank Hemmelder about Init Strings Modems on 02-06-93 17:29 <=- FH> But for the documentation v1.18 I need the following items: FH> FH> A. Modem initialisation strings SW> Hello Frank. I was running a very uncommon modem for a while, a Hayes SW> Optima 9600 external. You wouldn't think it would be that uncommon, SW> but no one seemed to have any info on how to init it with Super BBS. SW> After about two weeks of testing, I finally got it to work reliably SW> with the following init: SW> AT&FE0H0M0X1&C1&D2&Q5S0=1S2=127S7=60S10=60S36=5S46=136| SW> I know a lot of the parameters are factory defaults which I restore SW> the first thing in the string, but I kept them in just to make sure. SW> This string ran Super 117G reliably with an unlocked comm port and SW> numerous doors on-line, at all speeds. I had no front end mailer at SW> the time. The main key to getting it to work was the S36 and S46 SW> settings. Without those, some speeds would just get garbage whenever SW> they connected. Hope this helps. SW> Sam Wyatt SW> -!- GEcho 1.00 SW> ! Origin: The Basement Exchange - 14,400 at 816-563-6339 (1:280/85) SW> 1 Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 2229 Date: 02-06-93 10:31 From: Glenn Pinel Read: Yes Replied: No To: Frank Hemmelder Mark: Subj: Init Strings Modems ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Glenn Pinel drooled this drivel to Frank Hemmelder about Init Strings Modems on 02-06-93 10:31 <=- GP> Hello Frank! GP> 31 Jan 93, Frank Hemmelder writes to All: FH> WANTED -- WANTED -- WANTED -- WANTED -- WANTED -- WANTED -- WANTED FH> The SuperBBS docs 1.17 are ready. Just over 230 pages this time. FH> SuperBBS is expected to be released real soon now! FH> But for the documentation v1.18 I need the following items: FH> A. Modem initialisation strings GP> I use a 14.4 Boca external fax/modem and run SuperBBS with Front Door. GP> I have had good luck with... GP> AT&F&C1&D2%E1S11=50S10=30S36=7M0W2S37=0S95=3Q0H0| GP> (does this mean I'll get famous?!!! GP> Glenn GP> -!- FMail 0.92 GP> ! Origin: Some Guy's Basement (705)322-2643 Phelpston,Ontario GP> (1:252/412) 1 Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 630 Date: 02-04-93 18:43 From: Ryan Murray Read: Yes Replied: No To: Carlos Avellanet Mark: Subj: SBBS & HMB ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Ryan Murray drooled this drivel to Carlos Avellanet about SBBS & HMB on 02-04-93 18:43 <=- RM> Hello Carlos! RM> Sunday January 31 1993 16:14, Carlos Avellanet wrote to Ryan Shaw: CA> For the readers not familiar with this thread, I am having a problem CA> when accessing my SBBS message base. When selecting to read messages, CA> prompted for new, forward, reverse, etc, the message header is CA> displayed and then I am taken to a line(node) number selection prompt CA> as if I wanted to send a message to the user on the other line. I am CA> setup for a single node and when I get the prompt I cannot do CA> anything but select line 1 which immediately takes me right back to CA> the same prompt. Any ideas? RM> I got it...Your modem is Using XON/XOFF, first off, disable this if RM> you can, that is the best way, you should be using RTS/CTS flow RM> control, NOT XON/XOFF. In Other-->ON/OFF-->Allow Ctrl keys in msgs set RM> it to NO. If the option is not there (It might be new to the gamma) RM> there is NOTHING you can do (Besides register and then disable it) RM> Hope this helps... RM> \-Ryan-/ RM> -!- GEcho 1.00/beta+ RM> ! Origin: CyberSpace HQz - AllFix Reg/Support, SuperBBS Support RM> (1:153/942) 1 Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 902 Date: 02-07-93 09:08 From: Ken Givens Read: Yes Replied: No To: Tom Barstow Mark: Subj: Re: SuperBBS Option ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Ken Givens drooled this drivel to Tom Barstow about Re: SuperBBS Option on 02-07-93 09:08 <=- KG> Hello Tom! KG> Thursday February 04 1993 16:47, Tom Barstow wrote to Tom Scott: TS> TB>> Is there a way you can have users go directly to the qwk TS>> menu TS> TB>> after sign in? TS>> TS>> Yes there is a way, you just go to the UserEditor, and I TS>> believe it's on the second page of the users info, you can tell TS>> SuperBBS what Menu you would like to the user to see first. TS>> Just tell it to go to the .QWK menu. TB> I did that but he still goes thru all the other menus. Like to have it as TB> soon as he checks mail... Thanks Tom KG> Rename all of your inbetween files (News.a??, Dec#.a??, etc) and call KG> them from the TOP menu using control-A, type 5's. KG> Ken KG> -!- GoldED 2.41.B0108+ via EzyCom 1.02 KG> ! Origin: The Chess Board - EzyCom Registration - Dallas, Tx KG> (1:124/2213) 1 Ä Area: SAC SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 288 Local Date: 01-24-93 08:46 From: Len Morgan Read: Yes Replied: No To: All Mark: Subj: Virus Path ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Len Morgan drooled this drivel to All about Virus Path on 01-24-93 08:46 <=- LM> I ran into an interesting situation. I have a small virus program LM> that I use to test the Scan program when used in Sbbs. When you put LM> the following line into the config of sbbs, Scan.exe %1 /A /NOMEM LM> /NOPAUSE /NOBREAK /NOEXPIRE, it doesn't work. The only way to make LM> Scan work is to put it into the DOS path and leave the pathway, in LM> config, empty. The problem with this work around, is that if Scan gets LM> too old, it will send a message that it is over X months old and wait LM> for a enter key to proceed. That is what the /NOEXPIRE is for. LM> I have brought this to the attention of Aki, because it appears that LM> the %1, which should give the pathway and file name to be tested, LM> doesn't work. LM> Another situation that still has me mystified is that when running a LM> network, like I am, Netscan has to be run or it won't identify the LM> drive letters as valid. In the last version of both NETSC100 and LM> SCANV100, it appears that the .EXE programs are backwards. This LM> latest version requires me to run Scan.exe instead of Netscan.exe to LM> make it work. I thought about renaming the programs and putting them LM> in the appropriate package, however, when the program runs, such as LM> Netscan, it comes up as Netscan, and renaming it to Scan.exe would be LM> confusing and cause doubt on the security of the file. LM> Len LM> LM> LM> -!- SuperBBS 1.17 Gamma-1 (Reg) LM> ! Origin: QST - Sacramento's Premier Ham BBS (916) 920-1288 LM> (1:203/730) Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 2189 Date: 02-11-93 17:33 From: Greg Thompson Read: Yes Replied: No To: Tom Barstow Mark: Subj: Browse The Nodelist ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Greg Thompson drooled this drivel to Tom Barstow about Browse The Nodelist on 02-11-93 17:33 <=- GT> Hello Tom, GT> 10 Feb 93, Tom Barstow writes to All: TB> What is this used for...I tried it and didn't get it to display TB> anything...My config shows correct path to nodelist directory... GT> Did you compile the nodelist with Superbbs's compiler? If not then it GT> can't read Front Doors or any other type of compiled list. GT> Greg GT> -!- FMail 0.92 GT> ! Origin: The Nucleus II BBS Ft. Huachuca, Az.(602)459-3653 GT> (1:309/24) 1 Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 1712 Date: 02-11-93 14:34 From: Lee Anderson Read: Yes Replied: No To: Tom Barstow Mark: Subj: First time sign on ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Lee Anderson drooled this drivel to Tom Barstow about First time sign on on 02-11-93 14:34 <=- -> Is there a way with lconfig etc...When a user signs on it ask what -> language. I just want English. So this will not be displayed -> as a question? LA> Make a language.ctl file and just put ENGLISH on the first line and LA> you will default to english. LA> Lee LA> -!- PCBoard 14.5a LA> ! Origin: MagicLand PCBoard - D'Bridge Dealer/Support Site LA> (1:139/650) 1 Ä Area: SUPERBBS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Msg#: 673 Rec'd Date: 02-09-93 14:29 From: Tom Scott Read: Yes Replied: No To: Len Morgan Mark: Subj: Remote logon to sysop menu ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ -=> Tom Scott drooled this drivel to Len Morgan about Remote logon to sysop menu on 02-09-93 14:29 <=- LM> Do you have the "Allow Remote Sysop" (or something like this) LM> on in the config? TS> Hi again, TS> Yep I sure do... I had another sysop explain to me that the exact TS> wording on the command line is the password I have to use to gain TS> access to this, but in the sbbsmenu, the exact wording is the TS> following: TS> Usage: Menu [password] /M /F /[NS] /[/T ??:??-??:??] TS> My command line is : TS> Sysop [My password] TS> That's it... TS> I know this sounds a little confusing, but.. I'm not the best with TS> words TS> Later, TS> -Tom TS> -!- TS> ! Origin: ROBO1.08/SUPERBBS 1.17-GAMA ALPHA COLONY II BBS 2400 BAUD TS> (1:140/47) 1