** Courier HST Dual Standard Settings **


Here's a copy of my current "ATI5" NRAM settings.  Settings can be written to
NRAM by using the "AT&W" command:

USRobotics Courier 14400 HST Dual Standard NRAM Settings...

   DIAL=TONE   B0  F1  M0  X6
   BAUD=38400  PARITY=N  WORDLEN=8

   &A3  &B2  &G0  &H1  &I0  &K1  &L0  &M4  &N0
   &P0  &R1  &S0  &T5  &X0  &Y1  %R0

   S02=001  S03=013  S04=010  S05=008  S06=002
   S07=050  S08=002  S09=006  S10=010  S11=070
   S12=050  S13=000  S15=000  S19=000  S21=010
   S22=017  S23=019  S24=150  S26=001  S27=000
   S28=008  S29=020  S32=001  S33=000  S34=000
   S35=000  S36=000  S37=000  S38=000

   STORED PHONE #0: 
                #1: 
                #2: 
                #3:


The DIP switches set as follows:

Switch    Function                        Value
--------  ------------------------------  --------------------------------
01   OFF  Data Terminal Ready Operations  Normal DTR Operations
02   OFF  Verbal/Number Result Codes      Verbal (Word) Results
03   ON   Result Code Display             Results Enabled
04   OFF  Command Mode Local Echo         Keyboards Commands Displayed
05   ON   Auto Answer                     Auto Answer Disabled
06   OFF  Carrier Detect Operations       Couries Sends CD Signal When ...
07   OFF  Auxiliary, DIP Switch 3 ON      Result Codes In Originate ...
08   ON   AT Command Set Recognition      Recognition Enabled (Smart Mode)
09   ON   Escape Code (+++) Response      Modem Maintains Connection ...
10   OFF  Power-On/ATZ Reset Defaults     Load From Nonvolatile Memory
QUAD OFF  RS-232 Transmit/Receive Pins    Normal Assignments