ÚÄÄÄÄÄÄThe Hermit's HoleÄÄÄÄÄÄ¿
                     ³ (703)    Ò   Ò  Ò    (703)  ³
                     ³328-0028  ÇÄÄ·ÇÄĶ   328-HRMT³
                     ³[Public]  ÓÄĽР Ð    [HST]  ³
                     ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ


                                05-10-1993

                 MODIFY COMMAND.COM for more environment!
                           (Updated for DOS 6.0)


If, like most of us fellow tinkerers, you like to have a HUGE DOS prompt
and a jillion PATHS and SET commands, you have probably already run upon
the dreaded "OUT OF ENVIRONMENT SPACE" message!

Now you can solve that problem PERMANENTLY without any tricks, or the useless
SHELL command supplied with DOS.

Simply follow the instructions below and you can patch COMMAND.COM to generate
512 bytes of precious ENVIRONMENT space rather than the puny little 256 bytes
it spits out in the "stock" version.

It's easy.  For DOS 6.0, all you have to do is change the 10H byte at 1767H
to 20H (from sixteen 16-byte paragraphs to thirty-two).


Here's how:

1.  First copy COMMAND.COM to COMMAND.WRK, or something like that, and edit
       the WORK version only (just in case you screw up).

2.  My version of COMMAND.COM had the READ ONLY attribute set, so you must
       clear the attribute before you can edit.  Type 'ATTRIB -R COMMAND.WRK'.

3.  Type 'DEBUG COMMAND.WRK'

4.  You'll get the DEBUG prompt which is simply a '-'.

5.  Type 'E 1767 20'

6.  Type 'W' to write the changes.

7.  Type 'Q' to exit DEBUG.

8.  SAVE your original copy of COMMAND.COM by renaming it something else.
        Then type 'REN COMMAND.WRK COMMAND.COM'.

9.  Test your handy work by typing 'COMMAND' (the processor will be loaded
        again, THIS time with the big environment).

10. Type 'EXIT' to return to the original.

11. If both 'COMMAND' and 'EXIT' work OK, then you've done it right!

12. Reboot your machine and enjoy the new space, cadets.

13. Send money to The Hermit (me).



The debug addresses for some other versions of DOS are: 
 
MS-DOS 2.xx: 0ECF
MS-DOS 2.11: 0DF3
MS-DOS 3.00: 0F2C
MS-DOS 3.10: 0D
MS-DOS 3.2x: 0D4F
MS-DOS 3.30: 0EB8
COMPAQ 3.31: 0EB8
MS-DOS 5.00: 1666
MS-DOS 6.00: 1767