This is the AX.25 kit for Linux 1.1.20 or higher. It will _NOT_ work with
any prior release as the address passing system has changed in this kernel.

This directory contains

ax25krnl.tgz	:	The kernel changes. You also need to uncomment 
			the CONFIG_AX25 (and possibly CONFIG_PI2) options in
			config.in as well as installing these files. This
			contains support for the Ottowa PI/PI2 cards as well
			as KISS TNC support. There are also dumb 8530 based
			drivers for Linux available (eg for the USCC cards).
			These however contain material that cannot be placed
			under the GPL and are therefore of questionable
			legality. These drivers are intentionally NOT
			contained, nor tested.

ax25user.tgz	:	Latest user tool set. This creates the sources and
			manual pages.

			Unpack from / and do

			cd /usr/local/ax25
			mkdir bin pms pms/bin
			cd src
			make install

			Manual page installation varies between Linux
			distributions.

			To use the PMS you will need to alter pms.c before
			building to suit your system. Its more of an example
			to persuade someone to write a decent version than
			a real PMS - but it does work.