Have you registered the Modem Doctor ??? ---------------------------------------- Critically acclaimed in several national magazine and newspaper reviews, discussed on national computer media shows, the Modem Doctor is the best professional diagnostic tool designed to work with IBM-PC's and compatibles. The Registered Version of the Modem Doctor contains complete diagnostics for 8250 and compatible UARTS, RS-232 data lines, and Carrier tests. Some of the many diagnostic features of the Registered Version are; ** Support for COM 1 through COM 8 using system IRQ's 3,4,5 or 7 ** Baud Rates from 300 to 38400 bps !! NEW !! ** Support for Courier HST/Dual Standard/V.32 Modems [+] ** Auto-detection of Modems that use &T0 diagnostics ** Auto log-in of COMM ports 1 - 4 to DOS for use by other programs ** Manual log-in of up to 8 COMM ports for Non-Standard Hardware,including those with defective Uarts (on manual selection). !! NEW !! ** On-screen Display of all 8250 /16450/ 16550 UART registers ** On-screen Display of Modem S-Registers ** Full Diagnostic tests of UART and RS-232 Channels including; -- ALL UART REGISTERS -- ALL RS-232 Handshaking Signals -- 8259 Interrupt Controller Mask Registers -- Digital Loopback UART Tests including Chips with Tri-stated OUT2 signals -- Analog Loopback Data Tests ** Full Diagnostic Checks of "AT" Instruction Set Modems; -- Carrier Tests on both Originate and Answer Frequencies -- Carrier Test interface for "Dumb" Modems or Data Channels -- Modem Microprocessor Command Channel Diagnostics -- Support for High Speed Modems -- Support for Modems that use the alternate &T0 self test mode ** Interactive Mode with 4K Communications Buffer for; -- TTY mode Interactive Communications over serial port or Modem while on-line -- Custom Designed Tests...Help Menu Included -- On-Line "Hot-key" Viewing of 8250 UART Registers ** Hot-Keys for selecting the Baud rate and to Force a Modem Microprocessor test mode. !! NEW !! ** User Selection of Modem Drivers. Like Printer Drivers, these software modules add more selections and more test capability to The Modem Doctor. !! NEW !! ** New Status Bar that continuously displays the Port, Speed, Microprocessor Status, and Modem Driver selections. !! NEW !! ** Command Line Mode interface for setting up a modem to an initialization string contained in a user created file; !! NEW !! -- A Small text file contains the port (and optional address), the speed, and the string to send to the modem. Any text editor can create the file at any time! To order the Modem Doctor, send $19.95 in check or money order to Hank Volpe 108 Broadmoor Drive Tonawanda NY 14150