NETWORK (MULTI-USER) INSTALL FOR ALDUS PAGEMAKER 4.0

			  June 9, 1993

     The following details a network install for Aldus Pagemaker 
version 4.0 with Microsoft Windows 3.1, and ARTISOFT LANtastic NOS 
versions 4.10 or later.  This install is composed of a  "Server" 
install and several "Workstation" install options.  Check your Aldus 
Pagemaker license agreement to make sure you will be in compliance 
with their license policy.  Aldus Technical Support also has a FAX-YI 
bulletin on a network install of Pagemaker that may also be helpful 
for you.  Contact Aldus for further information.  


SERVER INSTALL
 1)  Make two directories on the server, NETALDUS and PM4 to hold the 
     network Pagemaker files.
	 MD\NETALDUS
	 MD\PM4

 2)  Load Windows.

 3)  Insert Disk 1 of the Pagemaker program disks into the A: drive.   
     Use the Windows' Progman File Run option to start the Pagemaker  
     install procedure.  On the run line, type the following command
     (substituting B: for A: if the B: drive is to be used for the 
     installation).
	 A:\ALDSETUP

 4) When prompted, enter the path for the Aldus Product files.
	 C:\NETALDUS

 5)  Highlight all options in the Select Setup Screen.  Then click on 
     the Setup button.

 6)  Enter the directory path for the Pagemaker program files then 
     click on OK.
	 C:\PM4

 7)  Enter the registration information and answer NO to modifying 
     the Autoexec.bat file.

 8)  Select All filters    (If you know only a few filters will be 
     needed by ALL stations then selecting only those filters will 
     save disk space and help improve Pagemaker performance).

 9)  When prompted, select All Postscript templates and ALL PCL 
     templates.

     ** the setup program will now copy all files to your hard disk 
	and complete the setup for the server.

10)  Exit Windows.  

11)  The Pagemaker files now need to set to read-only to allow them 
     to be shared.  Change to the C:\NETALDUS directory and do the 
     following commands.   The *.sav files created will be used for 
     the workstation setup.  Do the same for the PM4 directory.

       CD\NETALDUS                 (change to Netaldus directory)
       ATTRIB  +R  *.*/S           (sets all files to read-only)
       CD\NETALDUS\USENGLSH        (change to the Usenglsh directory)
       COPY ALDUS.INI ALDUS.SAV    (save the Aldus.ini & Aldusn.udc 
       COPY ALDUSN.UDC ALDUSN.SAV     files with .sav extensions.) 
       ATTRIB -R *.SAV             (remove read-only status from the 
				     *.sav files) 
       CD\PM4                      (change to the PM4 directory)
       ATTRIB +R *.*/S             (sets all files to read-only)
	   
12)  Server install is complete.



WORKSTATION INSTALL (for server)
     The workstation option does not need to be done for the server 
if the server is dedicated or you do not intend to run Pagemaker at 
the server.

 1)  Make the following directories on the server's hard drive.
	 MD\ALDUS
	 MD\ALDUS\USENGLSH

 2)  Copy the ALDUS.INI and the ALDUSN.UDC  files to C:\ALDUS\USENGLSH 
       
   Copy C:\NETALDUS\USENGLSH\ALDUS.SAV  C:\ALDUS\USENGLSH\ALDUS.INI
   Copy C:\NETALDUS\USENGLSH\ALDUSN.SAV  C:\ALDUS\USENGLSH\ALDUSN.UDC

 3)  Change to the Windows directory on the Server (if Windows is 
     setup to be shared on the network then change to the server's 
     personal Windows directory).  Edit the WIN.INI file and make the 
     following changes to the [ALDUS] section (will be near the 
     bottom of file).
	 [ALDUS]
	 AldusDirectory=C:\ALDUS
	 NetAldusDirectory=C:\NETALDUS
	 PM4LangDir=USENGLSH

 4)  Change to the C:\ALDUS\USENGLSH directory.  Edit the ALDUS.INI 
     file and make the following change to the [PageMaker4] section.
	 [PageMaker4]
	 PM4Defaults=C:\ALDUS\USENGLSH\PM4.CNF

 5)  Change to the root directory of the server (CD\).  Edit the 
     Autoexec.bat file and modify the path to include C:\NETALDUS  
     and C:\PM4.
	
   previous path:   PATH=C:\LANTASTI;C:\;C:\DOS;C:\WINDOWS
   new path: PATH=C:\LANTASTI;C:\;C:\DOS;C:\WINDOWS;C:\NETALDUS;C:\PM4

 6)  Log off all users logged into the server and reboot the server.

 7)  The server is now ready to run Pagemaker.  A Pagemaker group 
     complete with Icons was created during the initial Server Install 
     and is ready to run.



WORKSTATION INSTALL (using server drive only)
     This option will be used for a workstation that does not have a 
hard-disk or has very little hard-disk space available locally.    
Performance will be slower since all files will be pulled from the 
server.

 1)  Log into the server and 'Net Use' a drive letter to the server's 
     hard drive.  If the workstation does not already map a drive to 
     the server then the following lines should be added to the work-
     stations' Startnet.bat file to allow this to happen automatically 
     when the workstation loads the network.
	 NET LOGIN \\SERVER_NAME USERNAME
	 NET USE E: \\SERVER_NAME\C-DRIVE

 2)  Change to server's drive and make the following directory and two 
     Aldus subdirectories below it on the server's hard drive.  Change 
     to the E: drive before doing the following commands
	 MD\WS1
	 MD\WS1\ALDUS
	 MD\WS1\ALDUS\USENGLSH

 3)  Copy the ALDUS.INI and ALDUSN.UDC to the E:\WS1\ALDUS\USENGLSH 
     directory.
 Copy E:\NETALDUS\USENGLSH\ALDUS.SAV E:\WS1\ALDUS\USENGLSH\ALDUS.INI
 Copy E:\NETALDUS\USENGLSH\ALDUSN.SAV E:\WS1\ALDUS\USENGLSH\ALDUSN.UDC

 4)  Change to the workstations' Windows directory.  Edit the WIN.INI 
     file and add the following lines to the Bottom of the file.
	 [ALDUS]
	 AldusDirectory=E:\WS1\ALDUS
	 NetAldusDirectory=E:\NETALDUS
	 PM4LangDir=USENGLSH

 5)  Change to the E:\WS1\ALDUS\USENGLSH directory.  Edit the 
     ALDUS.INI file and make the following change to the [PageMaker4] 
     section.
	 [PageMaker4]
	 PM4Defaults=E:\WS1\ALDUS\USENGLSH\PM4.CNF

 6)  Change to the root directory of the workstation.  Edit the 
     Autoexec.bat file and modify the path to include E:\NETALDUS  
     and E:\PM4.

  previous path: PATH=C:\LANTASTI;C:\;C:\DOS;C:\WINDOWS
  new path: PATH=C:\LANTASTI;C:\;C:\DOS;C:\WINDOWS;E:\NETALDUS;E:\PM4

 7)  Reboot the workstation and load windows.  A Pagemaker group and 
     icon now need to be created.
	 Create Group:
	  a) Click  File on the Progman line at the top of the 
	     windows screen and select 'New'.
	  b) Select 'Program Group'.
	  c) Enter 'PAGEMAKER' for the description and 'PAGEMKR.GRP'  
	     for the group file name.
	  d) The Pagemaker group is now created.
	 Create Icon:
	    a) Click File on the Progman line and select 'New'.
	    b) Select 'Program Item'.
	    c) Enter 'Pagemaker' for the description and 
	       'E:\PM4\PM4.EXE  for the command line.
	    d) The Pagemaker icon is now created.
	    e)  To create the Table Editor Icon,  do steps a-c 
		substituting 'Table Editor' for the description
		and 'E:\PM4\TE.EXE' for the command line

 8)  The workstation is now ready to run Pagemaker.   



WORKSTATION INSTALL (using both the local and  server hard drives)
     This option will be used for a workstation that has space on its 
hard drive.  Some Pagemaker files will run from the local hard drive 
to improve Pagemaker performance.

 1)  Log into the server and 'Net Use' a drive letter to the server's 
     hard drive.  If the workstation does not already map a drive to 
     the server then the following lines should be added to the 
     workstations' Startnet.bat file to allow this to happen auto-
     matically when the workstation loads the network.
	 NET LOGIN \\SERVER_NAME USERNAME
	 NET USE E: \\SERVER_NAME\C-DRIVE

 2)  On the workstations' local drive make the following directories 
     and sub directories.    
	 MD\PM4
	 MD\ALDUS
	 MD\ALDUS\USENGLSH

 3)  Copy the ALDUS.INI and ALDUSN.UDC files to the C:\ALDUS\USENGLSH 
     directory.
  Copy E:\NETALDUS\USENGLSH\ALDUS.SAV C:\ALDUS\USENGLSH\ALDUS.INI
  Copy E:\NETALDUS\USENGLSH\ALDUSN.SAV C:\ALDUS\USENGLSH\ALDUSN.UDC

 4)  Xcopy the Pagemaker files from the server's PM4 directories to 
     the workstations' C:\PM4 directory.
       XCOPY  E:\PM4\*.*  C:\PM4\*.* /S   

 5)  Change to the workstations' Windows directory.  Edit the WIN.INI 
     file and add the  following lines to the bottom of the Win.ini 
     file.
	 [ALDUS]
	 AldusDirectory=C:\ALDUS
	 NetAldusDirectory=E:\NETALDUS
	 PM4LangDir=USENGLSH

 6)  Change to the C:\ALDUS\USENGLSH directory.  Edit the ALDUS.INI 
     file and make the following change to the [PageMaker4] section.
	 [PageMaker4]
	 PM4Defaults=C:\ALDUS\USENGLSH\PM4.CNF

 7)  Change to the root directory of the workstation.  Edit the 
     Autoexec.bat file and modify the path to include E:\NETALDUS 
     and C:\PM4.

  previous path: PATH=C:\LANTASTI;C:\;C:\DOS;C:\WINDOWS
  new path: PATH=C:\LANTASTI;C:\;C:\DOS;C:\WINDOWS;E:\NETALDUS;C:\PM4

 8)  Reboot the workstation and load windows.  A Pagemaker group and 
     icon now need to be created.
	 Create Group:
	  a) Click  File on the Progman line at the top of the 
	     windows screen and select 'New'.
	  b) Select 'Program Group'.
	  c) Enter 'PAGEMAKER' for the description and 'PAGEMKR.GRP'  
	     for the group file name.
	  d) The Pagemaker group is now created.
	 Create Icon:
	  a) Click File on the Progman line and select 'New'.
	  b) Select 'Program Item'.
	  c) Enter 'Pagemaker' for the  description and 
	     'C:\PM4\PM4.EXE'  for the command line.
	  d) The Pagemaker icon is now created.  To create the Table 
	     Editor Icon, do steps a-c substituting 'Table Editor'  
	     for the description and 'C:\PM4\TE.EXE' for the command 
	     line.

 9)  The workstation is now ready to run Pagemaker.   



ARTISOFT, Inc. makes no warranties as to the completeness or accuracy
of this document.   LANtastic is a trademark of ARTISOFT, Inc.  Brand
names, company names, and product names are trademarks or registered
trademarks of their respective companies.