****************************************************************************** .. * I have made this text file with the hopes that it will help some of you * * synchronet sysops out there setup the following doors: Legend of The Red * * Dragon, Usurper, VGA Planets Interface, & Zchat. These are the exact setups* * we use here at Midnight Passion, so this will not help everyone out there * * but I hope it will help any sysop running 1-4 nodes on a single machine as * * we do.. * * * * * * -Hunter * ****************************************************************************** First off, we should let you know what we are running as far as system background goes.... CPU: AMD 486/DX2 66 Synchronet Version: 2.00g Desqview ver 2.63 Cache Software: Hyperdisk ver. 4.70 (HYPERDKX) Cache Size: 2048k DOS's Ramdrive Size: 6144k Fossil Driver: X00 The following is what we have each node set for in SCFG: Node 1 - USR External 14.4 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Modem Configuration º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º ³COM Port 4 º º ³UART IRQ Line 3 º º ³UART I/O Address 2E8h º º ³DTE Rate 38400 º º ³Fixed DTE Rate Yes º º ³Hardware Flow Control CTS/RTS º º ³Answer After 1 ring º º ³Answer Delay 3 seconds º º ³Reinitialization Timer 15 º º ³Result Codes... º º ³Toggle Options... º º ³Control Strings... º º ³Auto-Configuration... º º ³Import Configuration... º º ³Export Configuration... º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Node 2 - Internal USR 14.4 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Modem Configuration º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º ³COM Port 1 º º ³UART IRQ Line 4 º º ³UART I/O Address 3F8h º º ³DTE Rate 38400 º º ³Fixed DTE Rate Yes º º ³Hardware Flow Control CTS/RTS º º ³Answer After 1 ring º º ³Answer Delay 3 seconds º º ³Reinitialization Timer 15 º º ³Result Codes... º º ³Toggle Options... º º ³Control Strings... º º ³Auto-Configuration... º º ³Import Configuration... º º ³Export Configuration... º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Node 3 - Internal USR 14.4 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Modem Configuration º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º ³COM Port 3 º º ³UART IRQ Line 7 º º ³UART I/O Address 3E8h º º ³DTE Rate 38400 º º ³Fixed DTE Rate Yes º º ³Hardware Flow Control CTS/RTS º º ³Answer After 1 ring º º ³Answer Delay 3 seconds º º ³Reinitialization Timer 15 º º ³Result Codes... º º ³Toggle Options... º º ³Control Strings... º º ³Auto-Configuration... º º ³Import Configuration... º º ³Export Configuration... º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Node 4 -External USR 14.4 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Modem Configuration º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º ³COM Port 2 º º ³UART IRQ Line 5 º º ³UART I/O Address 2F8h º º ³DTE Rate 38400 º º ³Fixed DTE Rate Yes º º ³Hardware Flow Control CTS/RTS º º ³Answer After 1 ring º º ³Answer Delay 3 seconds º º ³Reinitialization Timer 15 º º ³Result Codes... º º ³Toggle Options... º º ³Control Strings... º º ³Auto-Configuration... º º ³Import Configuration... º º ³Export Configuration... º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ You don't have to have the same exact setup as we do, but I put this in here so you could see and understand what our Com & IRQ's are so they go with the example .bat files ********************************************************************************* ********************************************************************************* LEGEND OF THE RED DRAGON ver. 3.20a ********************************************************************************* This door is setup pretty simple...I don't know why some folks are having problems getting it up.. This is what we have set in SCFG for LORD: ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Legend of The Red Dragon º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º ³Name Legend of The Red Dragon º º ³Internal Code LORD º º ³Start-up Directory D:\DOORS\LORD º º ³Command Line lord%#.bat º º ³Clean-up Command Line º º ³Cost in Credits 0 º º ³Access Requirements º º ³Execution Requirements LEVEL 10 º º ³Multiple Concurrent Users Yes º º ³Intercept I/O Interrupts No º º ³Swap BBS out of Memory Yes º º ³Modify User Data No º º ³Execute on Event No º º ³BBS Drop File Type GAP DOOR.SYS º º ³Place Drop File In Node Directory º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If you want to have lord run with multi-users you must setup a batch file for each node..Place the .bat files in the LORD directory..Name the batch files Lord1.bat, lord2.bat and so on..Here are our .bat files.. ÚÄÄÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÄÄ¿ ³Lord1.bat³ ³Lord2.bat³ ÃÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÃÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³LORD /pc:\sbbs\node1 /n1³ ³LORD /pc:\sbbs\node2 /n2³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÄÄÄ¿ ³Lord3.bat³ ³Lord4.bat ³ ÃÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÃÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³LORD /pc:\sbbs\node3 /n3³ ³LORD /pc:\sbbs\node4 /n4³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Pretty simple 1 line .bat file, but it works well here.....Now on to the LORDCFG setup...The following screen needs to be set the same for all nodes, with the exception of #4 & #7, I have not seen any noticable difference by trying to use and not use options A & B, It seems that if they are set to yes or no it doesn't seem to change the game performance any. EDITTING NODE SETUP (1) Node Number : 1 (2) BBS Name : Midnight Passion BBS (3) BBS Software : doorsys (4) Path To Drop File: C:\sbbs\node1 (5) Fossil/Internal : Using Regular Fossil Driver (6) Locked Port Speed: 38400 (7) Comport : PORT4 02e8 3 <---------Be sure you have the correct com, (8) Send Open Comports Command? : Yes! address, & IRQ set for each node (9) Send Reset Comports Command? : Yes! (A) Use Special ANSI Settings? : No! (B) Use direct screen writes? : Yes! (Q) Quit To Main ***************************************************************************************** ***************************************************************************************** USURPER ver. 0.71 ***************************************************************************************** This game has been a headache it seems since day one..But now it is running smoothly with the help of Night Twister.. Here's what we have in SCFG: ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Usurper º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º ³Name Usurper º º ³Internal Code USURPER º º ³Start-up Directory D:\DOORS\USUR º º ³Command Line usurp%#.bat º º ³Clean-up Command Line º º ³Cost in Credits 0 º º ³Access Requirements º º ³Execution Requirements LEVEL 10 º º ³Multiple Concurrent Users No º º ³Intercept I/O Interrupts No º º ³Swap BBS out of Memory Yes º º ³Modify User Data No º º ³Execute on Event No º º ³BBS Drop File Type GAP DOOR.SYS º º ³Place Drop File In Start-Up Directory º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ With the help of X00's XU command, it can be run on all nodes with non-standard IRQ's..The following are our .bat files..They are located in the Usurper directory..Also remember that with X00, com1 = port 0, com2 = port 1, com3 = port 2, com4 = port 3....... ÚÄÄÄÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÄÄÄ¿ ³Usurp1.bat³ ³Usurp2.bat³ ³Usurp3.bat ³ ³Usurp4.bat³ ÃÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄ¿ ÃÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄ¿ ÃÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄ¿ ÃÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄ¿ ³xu port:3:on ³ ³xu port:0:on ³ ³xu port:2:on ³ ³xu port:1:on ³ ³usurper /b38400³ ³usurper /b38400³ ³usurper /b38400³ ³usurper /b38400³ ³xu port:3:off ³ ³xu port:0:off ³ ³xu port:2:off ³ ³xu port:1:off ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ That's all there is to it for this one..... ***************************************************************************************** ***************************************************************************************** The PIT! ver. 4.01 ***************************************************************************************** This is another one of those doors that can being trying at times to setup, but actually is pretty easy... Here's what we have in SCFG: ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º The Pit (4.01) º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º ³Name The Pit (4.01) º º ³Internal Code PIT401 º º ³Start-up Directory D:\DOORS\PIT4 º º ³Command Line pit /node=%# º º ³Clean-up Command Line º º ³Cost in Credits 0 º º ³Access Requirements º º ³Execution Requirements LEVEL 10 º º ³Multiple Concurrent Users Yes º º ³Intercept I/O Interrupts No º º ³Swap BBS out of Memory Yes º º ³Modify User Data No º º ³Execute on Event No º º ³BBS Drop File Type GAP DOOR.SYS º º ³Place Drop File In Node Directory º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Luckly this door is multi-line friendly and doesn't require .bat files to be setup... You must create a configuration file within CONTROL for each node. This is what we have for node 1... ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßÛ EDIT THE PIT CONFIGURATION FILE Û ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍËÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÛ Load/Edit New Config º Config File ³ CONFIG\NODE1.CFG Û Edit Decription of Config º Description ³ node1.cfg Û Save Config File as... ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÛ Modem Settings º Modem Info ³ Fos /Locked /CTS-RTS/FIFO Û Door File Settings º Door File ³ DOOR.SYS Û Game Time Settings º Game Time ³ 045 Mins [00 Hrs+45 Mins] Û Monitor Settings º Monitor ³ Auto/Direct/No-Snow/Graph Û Hardware Settings º Hardware ³ Music/Sound/ÄÄÄÄÄ/ÄÄÄÄÄÄÄÄÛ SysOp Flag Settings º SysOp Flag ³ Hangup Penalty Active Û Bulletin Creation º Bulletin ³ Bulletin Creation Active Û LAN/Multitasker º LAN/Multi ³ Desqview Û PIT Game Setting º Game Select ³ GAME\DEFAULT.PIT Û ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÊÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÛ >Move <ÄÙ>Select Quit Û ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÛ ÛßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßÛ Û N O D E L I S T C O N F I G U R A T I O N Û ÛÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÛ Û Node No ³ PIT Config ³ PIT Config Description ³ Active Û ÛÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÛ Û -LOCAL- ³ DEFAULT.CFG ³ Local.cfg ³ Yes Û <-----Be sure and make a Û 001 ³ NODE1.CFG ³ node1.cfg ³ Yes Û node#.cfg for each node Û 002 ³ NODE2.CFG ³ node2.cfg ³ Yes Û Û 003 ³ NODE3.CFG ³ node3.cfg ³ Yes Û Û 004 ³ NODE4.CFG ³ node4.cfg ³ Yes Û Û 005 ³ NODE5.CFG ³ node5.cfg ³ Yes Û Û 006 ³ ÄÄÄ None ÄÄÄÄ ³ ÄÄÄÄÄÄÄÄÄ None ÄÄÄÄÄÄÄÄÄÄ ³ N/A Û Û 007 ³ ÄÄÄ None ÄÄÄÄ ³ ÄÄÄÄÄÄÄÄÄ None ÄÄÄÄÄÄÄÄÄÄ ³ N/A Û Û 008 ³ ÄÄÄ None ÄÄÄÄ ³ ÄÄÄÄÄÄÄÄÄ None ÄÄÄÄÄÄÄÄÄÄ ³ N/A Û Û 009 ³ ÄÄÄ None ÄÄÄÄ ³ ÄÄÄÄÄÄÄÄÄ None ÄÄÄÄÄÄÄÄÄÄ ³ N/A Û ÛÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍÍÍÍÛ > Move Page Up Goto Top <ÄÙ>Change Config Û Û Quit Page Dn Goto End Toggle Active Û ÛÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÛ ÛßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßÛ Û COMMUNICATION PORT INFORMATION Û <---- Within each node.cfg you must ÛÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÛ <---- set this information. Û Com Port 1 ³ Base: 03F8H IRQ: 4 Û <---- I think this is where folks Û Com Port 2 ³ Base: 02F8H IRQ: 5 Û <---- have the most problems, by Û Com Port 3 ³ Base: 03E8H IRQ: 7 Û <---- over looking this.. Û Com Port 4 ³ Base: 02E8H IRQ: 3 Û Û Com Port 5 ³ Base: 03F8H IRQ: 4 Û Û Com Port 6 ³ Base: 03F8H IRQ: 4 Û Û Com Port 7 ³ Base: 03F8H IRQ: 4 Û Û Com Port 8 ³ Base: 03F8H IRQ: 4 Û ÛÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÛ >Move <ÄÙ>Select Quit Û ÛÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÛ I hope this helps you out with this one.... ***************************************************************************************** ***************************************************************************************** VGA Planets Door Interface ver. 1.65 ***************************************************************************************** This is a real simple one to setup... ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º VGA Planets... º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º ³Name VGA Planets... º º ³Internal Code VPLAN º º ³Start-up Directory C:\SBBS\XTRN\VGAPLANT º º ³Command Line vgaplan%#.bat º º ³Clean-up Command Line º º ³Cost in Credits 0 º º ³Access Requirements º º ³Execution Requirements LEVEL 10 º º ³Multiple Concurrent Users No º º ³Intercept I/O Interrupts No º º ³Swap BBS out of Memory Yes º º ³Modify User Data No º º ³Execute on Event No º º ³BBS Drop File Type GAP DOOR.SYS º º ³Place Drop File In Node Directory º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ You will need to create a .bat file for each node...Name them VGAPLAN1.bat and so on....Place the .bat file in the door directory. ÚÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Vgaplan1.bat³ ³Vgaplan2.bat³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÃÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³vgaplane /d:c:\sbbs\node1 /s /t /f³ ³vgaplane /d:c:\sbbs\node2 /s /t /f³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Vgaplan3.bat³ ³Vgaplan4.bat³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÃÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³vgaplane /d:c:\sbbs\node3 /i:7:03e8 /s /t /f³ ³vgaplane /d:c:\sbbs\node4 /i:5:02f8 /s /t /f³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ non-standard IRQ ^ ^---Address .bat ÀÄ IRQ That's it for this one............. ***************************************************************************************** ***************************************************************************************** ZChat all versions ***************************************************************************************** I don't know why anyone would have trouble setting this one up, but I have seen some folks asking about it..It is very simple to setup..This chat is made to run with synch...as well as other software, but there are special features just synch... Here's what we have in out SCFG: ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º ZCHAT º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º ³Name ZCHAT º º ³Internal Code ZCHAT º º ³Start-up Directory ..\XTRN\ZCHAT º º ³Command Line zchat %# º º ³Clean-up Command Line º º ³Cost in Credits 0 º º ³Access Requirements º º ³Execution Requirements LEVEL 10 º º ³Multiple Concurrent Users Yes º º ³Intercept I/O Interrupts No º º ³Swap BBS out of Memory Yes º º ³Modify User Data Yes º º ³Execute on Event No º º ³BBS Drop File Type (R) RBBS/QuickBBS DORINFO#.DEF º º ³Place Drop File In Node Directory º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ There are no .bat files needed for Zchat, although you will need to put the following line in your autoexec.bat..This line is required if you want the built in modem connect to work and it also speeds up the chat it's self... c:\sbbs\xtrn\zchat\zcdv 5 ^ ^ÄÂÄThis is the total number of nodes you have, ³ ÀÄincluding your local node ³ ÀÄÄThis is the driver for use with desqview Now on to Zconfig........ ÉÍ[þ]ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Main Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Maximum Time Settings Paths BBS Type º º Store 120 BBS Data Path Maximus º º Give 120 C:\SBBS\ PCBoard 15.x ± º º Receive 120 Queue File Path QuickBBS ± º º Withdraw 120 E:\SWAP\ RemoteAccess ± º º Deposit 120 Renegade þ º º Searchlight ± º º Security Split Chat Settings Synchronet º º Minimum to chat 10 Packet size 6 º º SysOp 99 Packet delay 1 Drop File º º (+) DORINFO#.DEF º º Advanced Settings Misc. ( ) DOOR.SYS º º Invite reset delay 3 Max Lines 6 º º Packet delay 4 New User Credit 90 º º Idle TX time(1/10) 5 º º Other check delay 1 º º Sleep timeout 5 Ok Ü Cancel Ü º º ßßßßßßßß ßßßßßßßß º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Simple....Real simple.... Below is a example of node1.cfg which zchat will create once you enter in the correct information...As long as you have the correct address and IRQ set, you shouldn't have any problems..... ÉÍ[þ]ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Configure Node 1 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º BBS Node Path [ ] Subscription Line SysOp Paging Hours º º C:\SBBS\NODE1\ Min 16:00 º º Comm Method Max 21:00 º º Log file path and name ( ) FOSSIL º º C:\SBBS\NODE1\ZCHAT.LOG (+) Direct Page Sound º º º º Port Address 2E8 Node Color Page Length º º Port IRQ 3 Brown 30 º º Locked Baud 38400 Lt. Gray ± Chat Override Password º º TX Buffer Size 255 Dk. Gray ± ******** º º RX Buffer Size 255 Lt. Blue þ º º RTS/CTS [X] Lt. Green ± º º Lt. Cyan Ok Ü Cancel Ü º º ßßßßßßßß ßßßßßßßß º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ZChat creates it's own USER.DAT file when users enter the door, it DOES NOT use Synchronet's USER.DAT... That's it for ZChat...You can FREQ the latest Demo version from our board at 1:275/46 using the magik name CHATDEMO or ZCHAT...If you still can't get this door running properly call us voice at 804-583-5386.... ***************************************************************************************** I hope this file helps someone out there, if so just let me know..... Hunter Midnight Passion BBS 1:275/46 The only Synchronet ZChat Beta Site!