SUBJECT:  Experiment - Multi-Output Devices

SONG   :  Im Always Chasing Rainbows

AUTHOR :  John H. Frimodig ("Wildman5")

EQUIPMENT USED:  a. Computer - Packard Bell Executive (486DX/33)
                 b. RAM Memory - 20 Megabytes.
                 c. Mass Storage - 545 MB Hard Drive.

SEQUENCER USED:  Twelve Tone Systems - Cakewalk Apprentice

INSTALLED DEVICES:  a. Creative Labs, Inc - Soundblaster SB16(ASP)
                    b. Creative Labs, Inc - WaveBlaster
                    c  Speakers - Koss (amplified) Stereo Speakers.

DISCUSSION:  This song is a Multi-(Multi-Timberal) experiment to deveop
             procedures, etc., to simultaneously use ALL Three (3) Output
             Devices available in Cakewalk Apprentice, simultaneously.
             Input/Output Port settings and Instrument Banks used in this
             experiment are as follows:
             a. Input Devices: SB Super SAPI
                 (1) Voyetra Super SAPI FM Driver
                 (2) SB16 Midi IN

             b.  Output Devicees:
                 (1)  Microsoft Midi Mapper (Windows 3.1)
                 (2)  Voyetra Super SAPI FM Driver
                 (3)  SB16 MIDI Out

             c.  Port Settings are as follow:
                 (1)  Microsoft Midi Mapper - General MIDI
                 (2)  Voyetra Super SAPI FM Driver - Generalff MIDI
                 (3)  SB16 MIDI Out - MT-32
                 (4)  Microsoft MIDI Mapper - General MIDI
                 (5)  Voyetra Super SAPI FM Driver - General MIDI
                 (6)  SB16 MIDI Out - MT-32
                 (7)  Microsoft MIDI Mapper - MT-32
                 (8)  Voyetra Super SAPI FM Driver - General MIDI
                 (9)  SB16 MIDI Out - General MIDI

             d. Challel Settings are numbered sequentially in ascending order
                corresponding with each Port setting.

This song will play on 8-bit equipment, as is, with NO modification, however
a great deal of the Multi-Timberal effect is lost.