INSTALL.TXT
-----------
NOTE: FireFighter "Windows" was written for Windows version 3.1 and will not
work with "Windows version 3.0". 

Also FireFighter for "Windows" will probably not install properly if you are using Norton DeskTop or any other DeskTop manager other than the default windows program manager.


-------------------------------------------------------

Copy Fire Fighter for "Windows" to either an empty directory
on your C: drive, or to an  A:\ or B:\ drive floppy.

Make sure you uncompress the file if it is in compressed form.
Eg; If you received ONE file, that file is probably compressed.

You should have these files after you uncompress the file:

Install.txt
Help.cf_ 
Expand.exe  
Setup1.exe 
FFwin.ex_  
Thrd.vb_ 
Replace.ex_ ---- Registered version only 
FireChg.ex_ ---- Registered version only
FireWin.do_ 
Cmd.Vb_ 
Read.m_     - 
files.txt
file_id.diz
license.txt
desc.sdi
vendor.txt
SetupKit.Dll  
Vbrun200.dll
ffwin.hl_

NOTE: If you have an Unregistered Evaluation Copy you should also 
receive these files:

FireInf.rpt ----  Incident test file.
Practice.rpt----  Training test file.
Bottle.rpt  ----  Air Bottle test file.
Hose.rpt    ----  Hose test file.
Ladder.rpt  ----  Ladder test file.
Maint.rpt   ----  Maintenance test file.
Case2.rpt   ----  Training Module test file.
Contact.dat ----  Address test file.
Dial.dat    ----  Dialer test file
Roster.dat  ----  Roster test file.

The test files have been included to give you a quick method of
evaluating the program. 

Remember to delete all the test files before entering your own.

You must be running windows to install the program.

Select "File" from the Windows Program manager, then
select "Run".  Type the drive you are using to install 
Fire Fighter FROM: and type Setup1.

Example:  A:\Setup1 (if you are using the default drive.)
Example:  C:\Bin\Setup1 (if you are using C: drive and a 
directory called BIN). 
Example:  B:\Setup1 ( If you are using B: drive.)

If you have typed in the wrong Drive and/or directory
Program Manager will tell you it can't find the file.

Once Setup1 is running you will be asked for the name of the drive 
you are installing FROM.  Drive A: is the default.

Setup1 will ask you for the directory you want to install
Fire Fighter TO:.  The default is "C:\FireWin". If there 
is no directory by that name, Setup1 will create one. 

Setup1 will then install FireWin.

If setup1 cannot find a file it will stop installing the program.
If this happens make sure you re-read this text file and have
ALL the files in the directory or floppy disk that setup1 has been 
asked to install from.

If the installation is successful:

Setup1 will then create a Windows group called "FireFighter for windows".

If you have problems please read the file "Files.txt"

--------------------------------------------------------------------------

FOR REGISTERED VERSIONS OF FIREFIGHTER FOR "DOS"  ONLY:

If you have a registered copy of FireFighter for "DOS" and you 
REGISTER FireFighter for "Windows" : 

Setup1 will ask if you have a previous registered version of
Fire Fighter for "DOS".
Select "YES"

Setup1 will ask for the directory FireFighter for "DOS" 
records are kept.

Setup1 will then change all your FireFighter "DOS" records into 
a format FireFighter for "Windows" can use..
   
NOTE:

Setup1 will NOT change or harm your previous FireFighter"DOS" records 
in any way. 

"Windows" is a tradmark of MicroSoft Corporation. 
"MS-DOS" is a registered tradmark of MicroSoft Corporation

<End Install>