Copyright: SoftLink®Target Software 1992-1995


SoftLink

 Quick Start

Order Information

Communication Settings

Terminal Settings

Modem Settings

PhoneBook(Dial)

Protocol Settings

On Line Timer

On Line Time(Records)

PopUp Menu

Trouble Shooting

Other Target Products

Softlink©1995  Target Software\Robert Brinegar


Hello
Popup Menu

      Setup-

         Port-Brings up the settings for the Communication Numbers

         Terminal-Brings up the Terminal Configuration

         Modem-Brings up the Modem Configuration

      Communications

         Phone Book-Brings up the Phonebook configuration and dialing procedure

         Host Mode-Switches Softlink to host mode

         Open Port-opens the port

         Disconnenct-Disconnects the connection

         Interval-Sets the number of milliseconds for event checking

      File Works

         Download-Starts the download procedure

         Upload- Starts the upload procedure

         Protocol	- Brings up the Protocol options

         Open Capture File- Captures the screen or captures an ASCII file during	                                                 transmission

         Close Capture File- Closes the file(finishes the transmission)

      Edit

         Copy-Copies highlighted test to the clipboard.

         Paste- Pastes from the clipboard to the screen

         Clear Screen- Clears everything from the screen

      Script Works

         Record- Starts the record script procedure

         Play- Play the script you designate

         Edit Script- Brings up the script editor

      On Line Timer

         Timer-Starts the timer

         Records- Brings up the records of calls made

      Help

         Help- Shows this file

         Help On Help-Shows instructions on how to use help

         System Info- Intensive view of system information and related topics

         About- Shows the information about Target Software

      Exit- Shuts down the program


Records

Delete

Deletes the currently highlighted record. If you want to delete everything go into Softlink's directory and delete the file "records.ini".If you would like to delete records selectively, open up the file "records.ini" with a text editor such as notepad and cut away. Just don't delete the line in brackets [OnLine]

Print Records

This function simply prints the screen. What you see is what you get. Maximize Records and print away. You can also open up the file "records.ini" and print the contents this way.

Print Setup

This brings up Windows standard file print setup.

Exit

Closes down Records

Softlink©1995  Target Software\Robert Brinegar


Phonebook

Name

Type in the name of the company\person you want to connect to.

Number

Enter the number exactly the way you want it dialed.

Script File

Script files are great time savers(Money savers too!) Scripts simply record  all of your keystrokes and then reply them the next time that you call the host(If you record and play the script correctly). If you are dialing up a new host, it's probably better not  to record a script the first time. Get comfortable with the logon procedure first and then record the script. When you are ready, double click on the text screen and bring up the popup menu. Open up

script works and click on Record. Don't worry it'll only record the function connected to logging on. A file message will ask you for the name of the script and the directory. Give it any name you want or put it in any directory you want. The default is the directory you chose when you started up the program for the first time. Next choose the host and dial it up. Fill in all of the information that the host wants for logging on and whatever procedure that you want to do. The best way to end the script is to push the button on the toolbar (the green book with the "S" in the center). At this point I always stop what I'm doing and bring up the phone book again. The push button that says "Script" will bring up a file message asking which script to associate with the host that you have dialed. Choose the script that you just recorded and forget about it. The next time you dial him it'll be all automatic.

Set Protocol

OK,  why are there two different methods for setting the protocol? I don't know where you live, but this program was written in Asia. In Tokyo, Japan to be specific. If I connect to a host that is reputable then I find the best transfer method for him and set the protocol here. This will set the protocol for the transfer, but you still need to set the protocol again with the Set Protocol command before you transfer files up or down.. This seems to work most of the time. Some BBS's work fine and some don't work worth a #$#@. This is the area where you will have to find the best method for your local and needs

Hosts

This is the current list of hosts that you have configured. Double click on the one you want to dial.

Sound

The sound function works in conjunction with the record that you make in the phone book. It's possible to play the sounds with one and not with another. The default record for sounds is the topmost entry in the phone book. This means it will determine whether or not there are sounds when you load up the program.

Baud Rate

See Speed

Parity

See Parity

Data Bits, Stop Bits,Handshaking

See Communication Numbers

Dial

Starts the logon procedure for connecting to a remote host

New

Gives you blank forms to add in a new configuration

Close

Cancels the operation

Delete

Removes the record from the phonebook

Softlink©1995  Target Software\Robert Brinegar


Available Modems

Edit Modem String

This function allows the user to edit the highlighted modem. It also allows you to see the specific information about the highlighted modem. Usually the default settings set by the manufacturer are sufficient. However, there may come a time when you need to alter a setting. Before playing around with these settings you should make a backup copy of the file Modems.dat in your Softlink directory.

Add Modem

Suppose you buy a new US Robotics modem five years from now that is able to receive and transmit at speeds up to 195,200 bps. If you are still using this program, you could probably adapt the 14,400 settings for the USR modem that is in the program by changing the highest baud rate to 195,200 and a new initialization string found in USR's manual. Or, you may have to modify the settings to make the modem work in your country or whatever new technology we adapt to in the future. This is the place to do it.

Delete Modem

You shouldn't have to delete any of the modems that are listed. However, if you've incorrectly modified an existing modem, you can trash it by first highlighting it and then pushing the delete button. Once again make a backup copy of the file modems.dat

Pack Database

This functions compresses the file modems.dat in your Softlink directory. You shouldn't have to use this unless you have added a new modem to the list.

Maker

This list shows the name of all the companies producing modems that can be used with Softlink. First, single click on the companies name.

Model

This listbox shows all of the available modems produced by the company on the left. For further information on the modem in question, push the edit button to bring up the Modems statistics.

Port

This is the port number you want to use for the modem you assign. If you are having trouble connecting the program to your modem, check to see that this setting and the setting in the Port Configuration is the same.

OK\Cancel

Sets the modem as the default modem\Cancels the operation.

Softlink©1995  Target Software\Robert Brinegar


Communication Settings
Communication Numbers \Hardware Configuration

Speed

Set this speed to the highest speed that your modem can handle. At this writing the highest speed is 28.8 KPS. If you're using a modem at this speed, set your speed to  38400. If you're using a 14.4 KPS modem set it to 19200. If you're using anything below that, It's time to cough up the money for a new modem. If you're using anything higher, let me know! I want to get one too.

Data Bits

The default is eight bits per shot. Almost everything (even Compuserve) can handle this now. If the host you're connecting to doesn't give the specifications, try it at 8 bits first.

Stop Bits

The default setting for this is one. You should never have to change this. I've heard rumors that there are BBS's on Jupiter that need a two bit stop, but I've yet to connect.

Echo

This one is simple. If you're connecting to a host leave this at the default-off. If you're the host turn this one on or you won't be able to communicate with the client

DTR

Data Terminal Ready.   When this is set to on, the line is set high when the port is opened and low when the port is closed. Off always keeps the line low. The default is on and you probably shouldn't have to change it.

Flow Control (Handshaking)

Flow control (Handshaking) governs how the two modems talk to each other. It is central to the connection and making data transfer.

None- No flow control is used. 99 times out of a hundred your program will crash if you try to use this setting.

RTS/CTS- Request to Send Enabled/ Clear To Send Timeout - when

this is enabled, the handshaking is controlled by the hardware.

Xon\Xoff- When this is enabled the software controls the exchange.

Both- Both RTS/CTS and Xon\Xoff are used. The default setting and

one you shouldn't have to change.

RTS

The default is on and you shouldn't have to change this. Request To Send Enable allows the transfer to fluctuate between high and low  speeds as the data is transfered. If you are connecting to a host that only uses Xon\Xoff, then you might have to disable this.

Parity

Parity is an error checking method when data is being transfered. The default is none and most hosts will accept this. If the host system sends you a bunch of garbage on your screen when you connect, the problem is probably here. Changing from "None" to "Even" should

allow you to connect. If you've connected to a host that uses "Odd", drop me an E-mail and let me know. I've never seen one.

Comm Ports

Choose the port that you want to connect your modem to. A good idea is to first configure the port by using the Ports function in Control Panel in Windows(If it's still there in All mighty Windows 95). You can find your available port by typing MSD  at the Dos prompt. Check out the manual on how to do this.

OK

This saves the settings to file.

Cancel

Closes the operation

Softlink©1995  Target Software\Robert Brinegar


Terminal Settings
Terminal Setting

Screen Colors

These are the available colors for both backcolor and forecolor. Drag and drop the color you want to either fore or back below.

Fonts

The font and font size is the way to control the size of the terminal emulation in Softlink. You will have to experiment for yourself to find the correct setting for your monitor. Softlink was written on a 17 inch Vivitron monitor using ANSI-BBS as the terminal emulation. Terminal as the font, 9 as the size and NoBold as the bold setting. Maybe, you'll find other settings applicable to your needs. Note: If you do use ANSI-BBS as the default emulation you must use a font such as Terminal which supports those settings.  If the terminal window is too small, change the font and increase the font size. If it is too big, viceaversa. Sometimes if you connect to hosts that don't support your settings you will get strange results. Don't worry, you can change the settings at any time.

Screen Filter

You have three choices: full color, grayscale and monochrome. Full color will show the background and foreground colors that you choose. Grayscale is usually for older monitors that don't accept even VGA. Monochrome is black and white(black background white foreground). None of these setting will effect the normal working of Softlink. Hint: If you connect to a stingy BBS that has a low speed setting (like 2400) use monchrome if they have a lot of grphics.

Sample

This little window shows you a preview of how the screen will look after you set the choices. Don't worry if the font always looks bold in the test window, It'll look OK when you return to the screen.

Emulation

Softlink supports the following terminal emulations: TTY,ANSI,VT-52 AND VT-100. ANSI-BBS is probably the most universal and should work well most of the time. If you use this emulation, you must use a system font such as Terminal to make it work correctly.

Scrollback Rows

The default setting is the maximum size 409. You can decrease the size of the rows, but it won't change the size of the terminal window.

Set\Cancel

Saves the settings as the default settings\Cancels the operation.

Softlink©1995  Target Software\Robert Brinegar


Protocol

XModem Checksum

XModem Checksum is one of the oldest and most reliable file transfer protocols around. It sends information in 128 bit packages with one bit added as a checksum. It is in use on almost all BBS's and for single file transfer it is very reliable. When you use this protocol for either up\download, a file message will ask you for the filename and directory. When the file is verified, the transfer will begin. It offers 96% reliability.  Single file transfer.

XModem CRC

This is XmodemChecksum's younger brother. CRC (cyclic redundancy check) adds another bit to the package to enhance error checking. Nowadays, most hosts that offer Xmodem Checksum will switch to CRC if it is implemented. Usually it is shown in the transfer protocol menu. If not, give it a shot. If it bombs out, try again. The advantage is that it boosts the reliability to 99.6%. Transfer procedure is the same as XModemChecksum Single File Transfer

XModem 1K

XModem 1K (Sometimes aliased as WXModem) was an attempt to up the transfer speed to suit the Windows crowd. It transfers files in larger packets but I've found it to be unreliable at best. If you find a host that specifically lists it in their Transfer Protocol menu, try it out. It sometimes works with the usual XModemChecksum but why bother? I included it for people who like to use it. Personally I think it stinks!The FileTransfer Method is the same as for Big Brother (XModemChecksum). Single File Transfer

YModem Batch

X then Y and (yes) then Z. YModemBatch was developed after the X series to allow people to up\download groups of files. It's major advantage is that it increases the packet size to 1024 bits. It adds two bits for error checking like Xmodem CRC and it works well transferring large files. It's disadvantage is that if the line is noisy it bombs out in the middle of the transfer. If it is implemented in the hosts' Transfer Protocol Menu, go for it. After you tag the files for downloading and are set to receive from the host, push the download button on Softlink's button bar or use the popup menu. The files will load directly into the directory you chose as Softlinks File Transfer Directory. Most BBS's won't let you upload files in batches. However, if you are connected to another computer, it will upload all of the files in the default directory. Temporarily transfer files you don't want to send and send everything in the default directory. Batch File Transfer

YModem G

Y Batch's younger brother. It's a slightly improved version of YBatch and some newer BBS's have it listed. Batch File Transfer

ZModem

Of the X,Y,Z series ZModem is the fastest and most reliable. I always use it, if I can. The reason being it is about 99% reliable. Rain or Shine, Sleet or Hail trusty ZModem gets through. It transfers blocks of 512 bits but it only accepts the NAK return (means the block didn't get through try again) this improves speed enormously. Batch File Transfer see for directions

Kermit

Yes, it is named after Kermit the frog. It was developed at Columbia University in 1981(That's right 1981) and it is still one of the most popular file transfer protocols around. Here's why: It can transmit at either 7 bits or 8 bits depending on the host. It can adjusted the packet size of the transfer to match the host's default. If a transfer is interrupted, it can re-synchronize with the host and continue on (a real plus) and if that wasn't enough, it allows you to use wild cards in your transfer. Setting it for babyjane.* would transfer all files with the filename babyjane. Setting it for *.txt would transfer all text files. If that hasn't sold you yet here's another one: it compresses the files as it send them to save time. Batch File Transfer

Compuserve

A system specific protocol developed by Compuserve using 8 bit file transfers. I don't like this one and seldom use it even on Compuserve. It tends to bomb out at the last part of the transfer. Imagine transferring 2MB of information and when the meter says 98% complete

good ol' Compuserve B+ freezes up. Still, some people like it so, here it is. Same set up as the other single file transfers. Exception being that it will down load automatically into the default directory. Single File Transfer

ASCII

What you see is what you get. When you want to capture the screen, open capture file and the file message will ask you for a name for the file. The file is transfered one line at a time in ASCII format. It's an old protocol but one that is still useful, occasionally. You can download or upload text file using ASCII. Set the protocol and when the file message asks for the text file's name, type in the filename and set the directory.   Single File Transfer

Softlink©1995  Target Software\Robert Brinegar


On Line Timer

When you activate the timer function from either the button bar or the popup menu, the timer is automatically started. Pushing the hide button on the top left corner or pushing the control button "Hide" won't stop the timer.

Record

Writes  the date the call was made, the time the call was initiated, the receiver of the call, the receiver's number and the current duration of the on line time.

Stop\Start

Halts the timer.Start the timer

Pause\Resume

Pauses the timer\Resumes the timer

Clear

Clears the current setting

Hide

Hides the timer.

Softlink©1995  Target Software\Robert Brinegar


Set Directory (Files)

This is one of the first message boxes you will see when you setup Softlink. Type in the name for the default directory you want to use for your up\download files. You can use any place on your system for single file transfers, but batch transfers will always come and go to this directory. Type only the name of the directory i.e., babyjane (maximum 8 characters)not c:\babyjane or \babyjane.To change the name of the directory delete the file babyjane.ala from your Softlink directory. Note: If you try to use the name of a directory that is already listed it will cause the program to crash. You must give it a brand new name and it must be in Softlink's path. Sorry about this, but this is Windows fault not mine.

Softlink©1995  Target Software\Robert Brinegar


Other Target Software Products

Folders 2.0

Power Edit 2.2

Link 2.10

Softlink©1995  Target Software\Robert Brinegar


Folders 2.0

Folders 2.0

Personal Information Manager. Folders keeps all of your personal and business

records plus appointments in one handy location. Send faxes and Email.View

appoinments, search for clients and appointments using quick search, update

appointments automatically, load documents into image viewer and set them as wallpaper

Full telephone and network connection.  Shareware<ASP>

Order Information

When you register Folders you will get all of the features enabled in the complete version

without the nag screens. You will also receive further updates of Folders with additional

options and functions. To order Folders just enclose $38.00 plus $10.00 shipping and

handling. You can order on COMPUSERVE by typing Go SWREG at the prompt and

entering Registration ID# Number 4013 at the prompt or use the author's number

100202,714.

-------------------------------------------------------------------------

"CREDIT CARD ORDERS ONLY -

THE PSL ID NUMBER FOR FOLDERS IS: 14097

"You can order with MC, Visa, Amex, or Discover from Public (software)

Library by calling 800-2424-PsL or 713-524-6394 or by FAX to 713-524-6398

or by CIS Email to 71355,470. You can also mail credit card orders to PsL

at P.O.Box 35705, Houston, TX 77235-5705.

"THE ABOVE NUMBERS ARE FOR CREDIT CARD ORDERS ONLY.

"THE AUTHOR OF THIS PROGRAM CANNOT BE REACHED AT THESE NUMBERS.

"Any questions about the status of the shipment of the order, refunds,

registration options, product details, technical support, volume discounts,

dealer pricing, site licenses, non-credit card orders, etc, must be directed

By mail: Robert Brinegar

   Target Software

   Shinjuku-ku Wakamatsu-cho 16-4

   Fuji Copo 3D Tokyo, 162 Japan.

By Fax\Voice: +81-3-3207-4553

By CIS: 100202,714

By internet: targetsw@iac.co.jp

"To insure that you get the latest version, PsL will notify us the day of

your order and we will ship the product directly to you."

THE PSL ID NUMBER FOR FOLDERS IS: 14097

-------------------------------------------------------------------------

International Money orders are accepted and best.

Cash is also accepted(only at the current exchange rate for each particular country)

Indicate the number of copies you want. We only ship 3.5 inch disks.

Name:_________________________________________

Address:_______________________________________

Voice Number:_____________________

Fax Number:_______________________

Business Number:___________________

Method of Payment: Check () Cash () COMPUSERVE () Money Order

Cost: Japan ¥4,000 - US $38.00 Plus ¥700 shipping Japan and $10.00 US

COMPUSERVE Go SWREG Registration ID# 4013 or the Author's ID 100202,714

THE PSL ID# FOR FOLDERS IS 14097

Folders\Target Software

Softlink©1995  Target Software\Robert Brinegar


Power Edit

Power Edit (Network Text Editor) v2.02

File encryption, email, spellchecking. Powerful file preparation and transfer for WFW 3.11 or

stand alone word processor. View incoming mail from the network, full edit and reply.

Fully modifiable desktop -fonts, colors, sounds. Spellchecker with 100,000 word dictionary in registered version.  Shareware <ASP>

When you register Power Edit you will get all of the features enabled in the complete version without the nag screens. You will also receive further updates of Power Edit with additional  options and functions. To order Power Edit just enclose $35.00 plus $10.00 shipping and handling. You can order on COMPUSERVE by typing Go SWREG at the prompt and entering Registration ID# Number 5674 at the prompt or use the author's number 100202,714. Since you have registered ASP authored shareware, you can sign up for CompuServe service by calling 1-800-848-8199, ask for Operator 162 and you will receive a one time ASP $10 discount on your CompuServe bill."

-------------------------------------------------------------------------

"CREDIT CARD ORDERS ONLY -

THE PsL REGISTRATION NUMBER FOR POWER EDIT IS:#14096

"You can order with MC, Visa, Amex, or Discover from Public (software)

Library by calling 800-2424-PsL or 713-524-6394 or by FAX to 713-524-6398

or by CIS Email to 71355,470. You can also mail credit card orders to PsL

at P.O.Box 35705, Houston, TX 77235-5705.

"THE ABOVE NUMBERS ARE FOR CREDIT CARD ORDERS ONLY.

"THE AUTHOR OF THIS PROGRAM CANNOT BE REACHED AT THESE NUMBERS.

"Any questions about the status of the shipment of the order, refunds,

registration options, product details, technical support, volume discounts,

dealer pricing, site licenses, non-credit card orders, etc, must be directed to:

By mail: Robert Brinegar

   Target Software

   Shinjuku-ku Wakamatsu-cho 16-4

   Fuji Copo 3D Tokyo, 162 Japan

By Fax\Voice:+81-3-3207-4553

By Internet:targetsw@iac.co.jp

"To insure that you get the latest version, PsL will notify us the day of

your order and we will ship the product directly to you."

-------------------------------------------------------------------------

International Money orders are accepted and best.

Cash is also accepted(only at the current exchange rate for each particular country)

Indicate the number of copies you want. We only ship 3.5 inch disks.

Name:_________________________________________

Address:_______________________________________

Voice Number:_____________________

Fax Number:_______________________

Business Number:___________________

Method of Payment: Check () Cash () COMPUSERVE () Money Order

Cost: $35.00 Plus $10.00 shipping

COMPUSERVE Go SWREG Registration ID# 5674 or the Author's ID 100202,714

THE PsL REGISTRATION NUMBER FOR POWER EDIT IS:#14096

Softlink©1995  Target Software\Robert Brinegar


Link

Link v2.10

Link Auto Dialer for Callback Services. Connect your comm programs to your server using your callback service. Voice dial and timer. Keep and print records. Best hits list

of both programs and voice numbers. Compact interface. Save Time and money by getting your programs up and connected quickly Shareware <ASP>

When you register Link you will get all of the features enabled in the complete version without the nag screens. You will also receive further updates of Link with additional  options and functions. To order Link just enclose $20.00 plus $10.00 shipping and handling. You can order on COMPUSERVE by typing Go SWREG at the prompt and entering Registration ID# Number 4204 at the prompt or use the author's number 100202,714. Since you have registered ASP authored shareware, you can sign up for CompuServe service by calling 1-800-848-8199, ask for Operator 162 and you will receive a one time ASP $10 discount on your CompuServe bill."

-------------------------------------------------------------------------

"CREDIT CARD ORDERS ONLY -

THE PsL REGISTRATION NUMBER FOR LINK IS:#14098

"You can order with MC, Visa, Amex, or Discover from Public (software)

Library by calling 800-2424-PsL or 713-524-6394 or by FAX to 713-524-6398

or by CIS Email to 71355,470. You can also mail credit card orders to PsL

at P.O.Box 35705, Houston, TX 77235-5705.

"THE ABOVE NUMBERS ARE FOR CREDIT CARD ORDERS ONLY.

"THE AUTHOR OF THIS PROGRAM CANNOT BE REACHED AT THESE NUMBERS.

"Any questions about the status of the shipment of the order, refunds,

registration options, product details, technical support, volume discounts,

dealer pricing, site licenses, non-credit card orders, etc, must be directed to:

By mail: Robert Brinegar

   Target Software

   Shinjuku-ku Wakamatsu-cho 16-4

   Fuji Copo 3D Tokyo, 162 Japan

By Fax\Voice:+81-3-3207-4553

By Internet:targetsw@iac.co.jp

"To insure that you get the latest version, PsL will notify us the day of

your order and we will ship the product directly to you."

-------------------------------------------------------------------------

International Money orders are accepted and best.

Cash is also accepted(only at the current exchange rate for each particular country)

Indicate the number of copies you want. We only ship 3.5 inch disks.

Name:_________________________________________

Address:_______________________________________

Voice Number:_____________________

Fax Number:_______________________

Business Number:___________________

Method of Payment: Check () Cash () COMPUSERVE () Money Order

Cost:  $20.00 Plus $10.00 shipping

COMPUSERVE Go SWREG Registration ID# 4204 or the Author's ID 100202,714

THE PsL REGISTRATION NUMBER FOR LINK IS:#14098

Softlink©1995  Target Software\Robert Brinegar


Quick Start

Set The Directory for File Upload and Download

This is one of the first message boxes you will see when you setup Softlink. Type in the name for the default directory you want to use for your up\download files. You can use any place on your system for single file transfers, but batch transfers will always come and go to this directory. Type only the name of the directory i.e., babyjane (maximum 8 characters)not c:\babyjane or \babyjane.To change the name of the directory delete the file babyjane.ala from your Softlink directory. Note: If you try to use the name of a directory that is already listed, it will cause the program to crash. You must give it a brand new name and it must be in Softlink's path. Sorry about this.

Setting the Communication Numbers

For a basic setup the only two things you may need to modify are: 1) The baud speed for your modem and 2) the Comm Port number. Check out the text in Communication Numbers.

Host's configuration setting are becoming more and more systematized so the default settings for the rest of the settings should work.

Modem Configuration

Make sure that your modem is setup correctly and turned on before you startup Softlink for the first time.  If you have problems, refer to the text in this help file. Available Modems.

If you get a error message like "Modem not responding" or Cannot configure Modem", try and set up your modem from the port settings in Control Panel in Windows. In most basic systems the mouse is either on Comm1 or Comm2 (usually Comm1). If you 're setting up Softlink to run on your first modem, then put your Comm Port on the port that doesn't have the mouse.  Don't use Comm Ports 3 or 4 unless you have to. If your modem is not listed, try to use the Hayes compatible settings in the modem configuration. If you've set it up correctly

and it still doesn't work (*&*%$#!), then reboot your system and try again.

Terminal Settings

This is the least critical area for setup. I suggest using ANSI-BBS for your default emulation and Terminal(font) at size 9 or 12 for the font. If you need an in depth look at the terminal setup, check out the text in Terminal Settings

Softlink©1995  Target Software\Robert Brinegar


Order Information

When you register Softlink you will get all of the features enabled in the complete version

without the nag screens. You will also receive further updates of Softlink with additional  options and functions. To order Softlink just enclose $30.00 plus $10.00 shipping and handling. You can order on COMPUSERVE by typing Go SWREG at the prompt and entering Registration ID# Number 6660 at the prompt or use the author's number 100202,714.

-------------------------------------------------------------------------

"CREDIT CARD ORDERS ONLY -

THE PSL ID NUMBER FOR SOFTLINK IS: 14156

"You can order with MC, Visa, Amex, or Discover from Public (software)

Library by calling 800-2424-PsL or 713-524-6394 or by FAX to 713-524-6398

or by CIS Email to 71355,470. You can also mail credit card orders to PsL

at P.O.Box 35705, Houston, TX 77235-5705.

"THE ABOVE NUMBERS ARE FOR CREDIT CARD ORDERS ONLY.

"THE AUTHOR OF THIS PROGRAM CANNOT BE REACHED AT THESE NUMBERS.

"Any questions about the status of the shipment of the order, refunds,

registration options, product details, technical support, volume discounts,

dealer pricing, site licenses, non-credit card orders, etc, must be directed

By mail: Robert Brinegar

   Target Software

   Shinjuku-ku Wakamatsu-cho 16-4

   Fuji Copo 3D Tokyo, 162 Japan.

By Fax\Voice: +81-3-3207-4553

By CIS: 100202,714

By internet: targetsw@iac.co.jp

"To insure that you get the latest version, PsL will notify us the day of

your order and we will ship the product directly to you."

THE PSL ID NUMBER FOR SOFTLINK IS: 14156

-------------------------------------------------------------------------

International Money orders are accepted and best.

Cash is also accepted(only at the current exchange rate for each particular country)

Indicate the number of copies you want. We only ship 3.5 inch disks.

Name:_________________________________________

Address:_______________________________________

Voice Number:_____________________

Fax Number:_______________________

Business Number:___________________

Method of Payment: Check () Cash () COMPUSERVE () Money Order

Cost:  $30.00 Plus $10.00 shipping and handling

COMPUSERVE Go SWREG Softlink's Registration ID# 6660 or the Author's ID 100202,714

THE PSL ID# FOR SOFTLINK IS 14156

Softlink©1995  Target Software\Robert Brinegar


TroubleShooting

The program won't connect to the modem

This is one of the stickiest areas in communications programs. First make sure that you have chosen the correct modem from the available modems section. If you can't find the exact model, try and choose a similar model. You'll have to look in your user's manual for your modem to find a similar one. If all else fails, find out what the initialization string is for your model (from your user's manual)and from the available modems section push the add button. Enter the string of numbers and letters that you have found in the initialization section and next set the highest baud speed. These are basically the only two settings that you need to change other than entering the make and model number. If you're not running Windows 95 yet you'll have to go to the control panel and select the ports option. Make sure the settings for the port you're using are the same as the settings you've entered into the settings for SoftLink.

You try to type when you're on line, but nothing happens

When you connect to a host you need to bring the mouse over to the flashing cursor and click on the screen next to it. This brings the focus to the screen and allows you to enter keystrokes.

Also, if you've used the host mode before you connected to a host, you may have to restart Softlink to bring it in to client mode.

The program bombs out during file transfer

If you're transferring a single file try using XModem Checksum first. If you're transferring multiple files, try using ZModem first. Remember to set the protocol using the Set Protocol function on either the popup menu or the toolbar before you begin the transfer. If you try to change the protocol because there is a problem with the host in the transfer, the program will crash. Wait till the host gives control back to you and then try and reset the protocol. The reasons for file transfer problems are numerous: noisy lines, bad weather conditions, bad connections etc. If you have the same problem repeatedly, use a different protocol or connect to a better host.

The script won't record\play

If you've never used script files before, don't worry they're nothing to be afraid of. All they do are to record your keystrokes and play them back the same way the next time you connect.

For a new session with a new host follow this procedure 1) enter all of the information about the host into Phonebook. 2) close Phonebook and push the script record function on the toolbar or the popup menu. Enter the name of the script file and push OK. 3) Now push dial and when you connect to the host, enter the information the way you usually do. When you're logged on and at the place you want to be, push the stop record function. Wallah... the script is recorded. The next time you want to dial that host push the script function in Phonebook and chose the script that you recorded previously and dial. It's as simple as that. If you understand scripts well use the edit script function to change the script. Even if you are not a programmer you can make simple changes yourself. If you want to use a higher speed number for an online serve like Compuserve, you don't need to record a new script. Just open the script file using the edit function and change the phone number. The same with modem speeds etc., etc..

Softlink©1995  Target Software\Robert Brinegar