Kula Software Inc. 6070 Marine Drive West Vancouver BC Canada V7W 2S3 order: 1-800-313-6070 tech support: (604)921-5974 fax: (604)921-5973 Internet: 72764.2254@compuserve.com CompuServe: 72764,2254 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß EZNOTE v2.0 User's Guide Copyright (c) 1994 by Kula Software Inc. All Rights Reserved. ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß Table of Chapters: 1. Introduction 2. Application Interface 3. File Management 4. EZNOTE Editor 5. Key/Mouse Command Summary 6. I N D E X --------------------------------------------------------------- 1.0.0 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß Chapter 1 Introduction ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ Sections for Chapter 1: 1. Overview 2. System Requirements 3. Installation 4. Sound Card / MIDI Interface drivers 5. Conventions Used in this Guide 6. Music Terms Used in this Guide 1.1.0 Overview ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ EZNOTE is a powerful music notation editor. Equipped with four staffs, full printer support, and MIDI sound card support, EZNOTE is the perfect composing tool for amateur musicians, or learning tool for music students of all ages. To begin, simply open the Edit Window, and use the keyboard, mouse, or MIDI keyboard to place each note at the desired line or space on the staff. Complete the measure by adding rests, ties, or triplets. At any time, press , or click the [Hot-Key] button to see a list of all available editing commands. EZNOTE will group flagged notes and label chords automatically. You may even Import a MIDI file, and have EZNOTE score the tracks for you! With 15 key signatures, various time signatures, treble and bass clef selection, cut, copy, paste, transpose, clone, and align functions, EZNOTE should easily fulfill all your editing needs. For playback, set the tempo and volume, and choose among 128 instruments for each staff. You may even add song lyrics or import them from a text file. Watch the lyrics scroll by for karaoke-style sing-alongs! 1.2.0 System Requirements ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ IBM compatible PC with hard disk and 1 floppy disk drive MS-DOS 3.3 or greater VGA graphics adaptor 640K RAM Mouse optional Sound card / MIDI interface recommended 1.3.0 Installation ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ EZNOTE must be installed on the hard drive to operate correctly. Insert the program diskette into drive A. At the DOS prompt, type a:install and press . (replace b: for a: for floppy drive B) Items for this Section: 1. Starting the Program 2. EZNOTE command line switches 1.3.1 Starting the Program ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Be sure to be in the \EZNOTE directory when you start the program. EZNOTE searches only the current directory for its supporting files. Type e-z-n-o-t-e to start the application. 1.3.2 EZNOTE command line switches ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The following switches may be typed after 'eznote' at the DOS prompt: -? Display all command line arguments. -i[xx] Override MPU401 IRQ (default=2) -p[xxx] Override MPU401 port address (default=330h) -q Quiet mode. -pc Force PC speaker. -mpu Force Roland MPU401. -sb Force Sound Blaster. -gus Force UltraSound driver. -vmp Force Voyetra VMP driver. -x[xxxx] Detects and uses Extended memory(XMS) for program overlays. Sometimes EZNOTE loads program code from disk (eg. for dialogue boxes, on-line help). With this switch enabled, EZNOTE can save overlays in XMS for faster retrieval. This may improve program performance. A starting address may be set in kilobytes (eg. eznote -x1000: use XMS at address 1,000,000). -e Detects and uses Expanded memory(EMS) for program overlays. See description above for XMS. 1.4.0 Sound Card / MIDI Interface drivers ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ EZNOTE automatically searches for the sound card or driver installed on your system. If no sound card or driver is found, EZNOTE uses the PC speaker for sound. If more than one card is installed, you must specify the card desired on the command line (see 1.3.2 EZNOTE command line switches). The following sound cards are currently supported: Sound Card/MIDI Interface driver ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄ Roland MPU401 and compatibles - Sound Blaster and compatibles - Advanced Gravis UltraSound ultramid Others Voyetra VMP drivers Items for this Section: 1. Roland MPU401 and compatibles 2. Sound Blaster and compatibles 3. Advanced Gravis UltraSound 4. Voyetra VMP drivers 1.4.1 Roland MPU401 and compatibles ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The default IRQ is 2. The default MIDI port address is 330h. These settings may be overrided on the command line with the -i switch or the -p switch. eg. eznote -i5 -p300 This command sets EZNOTE to use IRQ 5 and port address 300h. (see 1.3.2 EZNOTE command line switches) 1.4.2 Sound Blaster and compatibles ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The BLASTER environment variable must be set in order for EZNOTE to use the Sound Blaster or compatible cards correctly. eg. SET BLASTER=A220 I7 D1 T3 (A=Base port I/O address, I=IRQ number, D=DMA channel, T=Sound Blaster version) You should have a line that looks like this in your autoexec.bat file. See the Sound Blaster user manual for more details. To use the Sound Blaster MIDI interface adaptor, your card must have DSP ROM version 2.00 or later. 1.4.3 Advanced Gravis UltraSound ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The ultramid driver must be loaded prior to running EZNOTE. To load, simply type 'u-l-t-r-a-m-i-d' at the DOS prompt. The following command line switches may be used with ultramid: -16 Use 16-bit patches for improved sound performance. The default is 8-bit. -c Preloads a 256K, 512K 768K or 1024K patch library, depending on how much memory you have on your UltraSound card. -f Unload ultramid from memory -m[xxx] [1-127] Sets the master volume for music. The default volume is 127. -d[path] Use an alternate path for finding the ultramid configuration file and for finding patches. The path should include a trailing backslash (e.g.) -Dc:\game\ 1.4.4 Voyetra VMP drivers ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ EZNOTE supports many more sound cards via the VMP drivers created by Voyetra Technologies. Call Kula Software for more information as to how to obtain these drivers. 1.5.0 Conventions Used in this Guide ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Names of keys on the computer keyboard are in this style: - user is to press the Enter key - user is to hold down the Shift key, press the Delete key, then release both keys. Icons that may be selected by keyboard or mouse are in this style: [Lyric] MLB and MRB are used as an abbreviation for Mouse Left Button and Mouse Right Button respectively. 1.6.0 Music Terms Used in this Guide ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ note - The fundamental unit of music which represents a sound at a specific pitch. note duration - The length of time for which a note is sounded. chord - This term describes a position within a measure. The chord may consist of one note, or a group of notes. measure - The basic unit of a song which consists of a group of chords delineated by vertical bars. staff - A set of five horizontal lines and spaces, used to mark note positions. -------------------- End of Chapter 1 ----------------------------------- 2.0.0 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß Chapter 2 Application Interface ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ Sections for Chapter 2: 1. General Description 2. Slidebar 3. Selectors 4. Text Icons 5. Text Selector Icons 6. Dialogue Boxes 7. Warning Dialogue Box 8. Free Memory 9. File Saving 10. Staffs 11. Checkbox Icons 2.1.0 General Description ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The application interface is a graphical user interface (GUI). All icons may be accessed by either by the keyboard, or clicking the mouse left button (MLB). Function key icons are always accessible along the bottom of the screen and may be activated by pressing the corresponding function key, or clicking on the icon with the mouse. There are more function keys available by holding down the key and then pressing the desired function key. Activate to quit the program. 2.2.0 Slidebar ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The slidebar under the music notation window is for navigating the song measures. The number on the slider button displays the current measure. The following are some basic keyboard commands to move the slidebar: - move to previous measure - move to next measure - move back ten measures - move forward ten measures - move to first measure - move to last measure With the mouse, click the MLB on the slidebar arrow icons or anywhere along the slidebar. Alternatively, drag the slider button along the slidebar. 2.3.0 Selectors ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ With the keyboard, selectors must be accessed first by hot-key before access to its functions are allowed. When a selector is active, the heading will be highlighted. The selector functions are accessible by either hot-key, or by moving a highlighted box with the arrow keys to the desired icon and then pressing . To exit the selector without making a choice, press . With the mouse, simply click the MLB on the desired icon. 2.4.0 Text Icons ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Text icons allow text input in dialogue boxes. They are accessed by label hot-key or by clicking the MLB in the text window. When active, the label will be highlighted. Press or click the MLB outside of the window to accept. Press to reject the input. Text icons that allow numeric input will have [+][-] buttons next to the text window. Click the MLB on these buttons to increment or decrement the current value by one. 2.5.0 Text Selector Icons ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Text selector icons resemble text icons except that the user is presented with a list of choices. To advance the list press the or click the MLB. When the desired choice is found press or click MLB outside of the window. will reject the input. 2.6.0 Dialogue Boxes ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Many functions will open up a dialogue box. All dialogue boxes may be exited by pressing to accept (mouse click [OK]), or to reject (mouse click [Cancel]). Icons are selected by keyboard hot-keys, or the MLB. When a selector or text icon is active, or will accept or reject any input changes for that icon, and the dialogue box will remain open. Most dialogue boxes have a [Help] button. 2.7.0 Warning Dialogue Box ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Many functions will present a warning before executing. Press (mouse click [OK]) to continue, or press (mouse click [Cancel]) to cancel the function. 2.8.0 Free Memory ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The number of bytes available as free memory is always displayed at the top right of the screen. When this number falls below 1000 (1K), it will be displayed on a red background as a warning. When memory is very low, notes may be lost during some editing operations, and some dialogue boxes may be unable to display selection lists. Next to the free memory display, is the number of bytes in the Measure Buffer. The Measure Buffer is filled during cut and copy operations during measure editing. 2.9.0 File Saving ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The song displayed on the screen is a working copy. All editing functions will permanently alter this working copy. Whenever an edit occurs, a music symbol () will appear next to the song title. Be sure to save the song to the hard disk frequently to avoid accidental editing mistakes. See Chapter 3: File Management for details about saving and loading songs 2.10.0 Staffs ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ There are four staffs to work with: S1, S2, S3, and S4. Only two staffs are visible at a time. To advance to the next staff click the MLB in the Down arrow between the two visible staffs, or press . To go to the previous staff click the MLB in the Up arrow, or press . The CheckBox icon under each staff marker indicates if the staff is active or not. Press to toggle the top staff or to toggle the bottom staff, or click the MLB within the Checkbox. 2.11.0 Checkbox Icons ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Checkbox icons are available for options that are to be either on or off. "On" is marked by a check mark (ū), and "Off" is marked by an 'X'. To toggle the option, press the label hot-key or click the MLB within the box. -------------------- End of Chapter 2 ----------------------------------- 3.0.0 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß Chapter 3 File Management ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ Sections for Chapter 3: 1. File Options 2. File Input 3. Import a MIDI File 3.1.0 File Options ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Function key will open the File Options dialogue box. Items for this Section: 1. Open 2. New 3. Save 4. Import MIDI 5. Export MIDI 6. Import Buffer 7. Export Buffer 8. Import Lyrics 9. Export Lyrics 3.1.1 Open ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Open an existing EZNOTE song file from disk. If changes have been made to the current song, a warning message will ask you if you want to save before proceeding. 3.1.2 New ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Clear the current song. All song settings will be restored to default values. If changes have been made to the current song, a warning message will ask you if you want to save before proceeding. 3.1.3 Save ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Save the current song to disk. Function key is a short-cut for saving files. 3.1.4 Import MIDI ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Import a standard MIDI file. File formats 0 and 1.0 are supported. If changes have been made to the current song, a warning message will ask you if you want to save before proceeding. 3.1.5 Export MIDI ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Export the current song as a standard MIDI file (format 1.0). The first track will contain tempo, time and key signature information. The following tracks will contain MIDI data derived from staffs S1 to S4. If a staff is inactive, its notation will not be exported (see 4.2.3 Staff checkbox). 3.1.6 Import Buffer ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Import an EZNOTE song file to the Measure Buffer. The contents of the Measure Buffer may then be pasted or merged anywhere within the current song. In this way, song parts may be transferred between files. 3.1.7 Export Buffer ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Export the Measure Buffer to an EZNOTE song file. The Measure Buffer is created from Cut and Copy operations during Measure editing. Later, exported song parts may be imported to a new song. 3.1.8 Import Lyrics ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Import a standard DOS text file of song lyrics. Each line of the text file will serve as lyrics for successive measures. To see lyrics along the top of the notation window, set the text mode to 'lyric/chord' or 'song lyrics' (see 4.10 Song Settings). 3.1.9 Export Lyrics ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Export song lyrics to a DOS text file. Each measure lyric will serve as a single line in the file. 3.2.0 File Input ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The File dialogue box has three windows: Name, File, and Directory. With the keyboard, press the corresponding hot-key (N,F,D) or press to move to the next window. With the mouse, click in the desired window. Items for this Section: 1. Name 2. File 3. Directory 3.2.1 Name ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ If a file name is entered, EZNOTE will search only the current directory. If a file mask (eg. *.*) or directory path is recognized, control is automatically passed to the File window. To change drives, type in the desired drive (eg. A:). ".PNO" is the default file extension for save and open functions. ".MID" is the default for MIDI file functions. ".BUF" is the default for Measure Buffer functions. ".LRC" is the default for Lyric file functions. 3.2.2 File ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ With the keyboard, move the highlighted bar to the desired file using <  > <  > , or the first letter of the desired file. Press to make your selection. With the mouse, move the highlighted bar by clicking or dragging the mouse within the window or by moving the slidebar. Make your selection by double clicking the mouse on the highlighted bar. A description of the current highlighted file is displayed under the file window and shows the file name, size, and date and time of last update. 3.2.3 Directory ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Navigation in this window is similar to that described for the File Icon. 3.3.0 Import a MIDI File ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ EZNOTE can import four MIDI file tracks to be assigned to the staffs. Within the selected tracks, a measure range may also be specified so as to isolate a specific song part. You may play the selected tracks or play all available tracks in the MIDI file. You may also return to the File Input dialogue box to import a new file. Items for this Section: 1. Track Selection 2. Measure Range 3. 4. Quantize 5. Play 6. New File 3.3.1 Track Selection ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter <1> to <4> or click within a track window to select a track from the MIDI file for importing to the staffs S1 to S4. With the keyboard, Enter or to see a list of available tracks. 3.3.2 Measure Range ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A measure range may be specified for importing a track part. This may become necessary for large tracks due to memory limitations. The allowable range is 0 to 999. 3.3.4 Quantize ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The Quantize function allows the timing of raw MIDI data to be structured for notation purposes. This is especially important for imported MIDI files that are created by raw recording only. Because music timing is never perfect from such recording, EZNOTE must know how to align note starting times that are not precisely on beat, and the minimum duration of each note. Note-On ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The lowest resolution is 4, so that all notes would be forced to start at the nearest Quarter note boundary. The highest resolution is 32, for which all notes would be aligned along the nearest Thirty-two note boundary. The higher the resolution, the more accurately does the notation reflect the original piece of music. However more memory is required for higher resolutions. Note Duration ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The minimum duration for each note ranges between Quarter note and Thirty-two note. All raw note durations that are found to be less than this minimum, will be lengthened so as to conform to this setting. If the [?] setting is selected, EZNOTE will quantize each note duration automatically, based on the next note starting time. 3.3.5 Play ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter

or click [Play] to play all the tracks in the MIDI file. Enter or click [Play Trk] to play only the selected tracks. 3.3.6 New File ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter or click [New...] to return to the File Input dialogue box so as to import a new file. -------------------- End of Chapter 3 ----------------------------------- 4.0.0 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß Chapter 4 EZNOTE Editor ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ Sections for Chapter 4: 1. Music Notation Window 2. Staff Window 3. Note Selector 4. Rest Selector 5. Edit Window 6. Chord Editing 7. Chord Selector 8. Measure Selector 9. Song Statistics 10. Song Settings 11. Global Settings 12. Printing 4.1.0 Music Notation Window ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The music notation window consists of a white music sheet with four staffs: S1 to S4. Only two staffs are displayed at a time. The current time signature will appear at the beginning of the first measure. The song pointer is a vertical line that marks the current chord position. There will always be one empty chord position in every measure so that the measure may expand. Navigation is always restricted to existing chord positions. If the edit window is opened at this empty chord position, a new chord will be added. Opening the edit window on an existing chord allows editing of that chord. A song's music notation is displayed linearly and may be viewed by panning left or right. See 5.4 Slidebar on how to navigate the notation window 4.2.0 Staff Window ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Items for this Section: 1. Hot-key Icon 2. Beat Windows 3. Staff checkbox 4. Moving the staffs 5. Advancing the staffs 6. Chord markers 7. Measure markers 4.2.1 Hot-key Icon ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Press or click on the [(?)Hot-Key] icon for a display of available editing functions with corresponding hot-keys and mouse commands. 4.2.2 Beat Windows ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The beat windows above the top staff and below the bottom staff display the total number of beats in the current measure. This is used to assist note entry, and should match the number of beats in the time signature (numerator). The current beat within the measure is displayed in the window between the two staffs. 4.2.3 Staff checkbox ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The active staff is marked by a check mark (ū), an inactive staff is marked by an 'X'. The staff checkbox may be toggled by pressing or , or clicking the MLB in the checkbox. Activate to access all the staff checkboxes at once (see 4.10.0 Song Settings). An inactive staff will not sound in the Edit Window or during playback, or be exported to a MIDI file. 4.2.4 Moving the staffs ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Pressing / or clicking the [+][-] icons next to the top staff, will move the staff up or down respectively. Pressing / or clicking the [+][-] icons next to the bottom staff, will move the staff up or down respectively. You may wish to move the staffs so as to access out of bounds staff positions. 4.2.5 Advancing the staffs ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ To advance to the next staff click the MLB in the Down arrow between the two visible staffs, or press . To go to the previous staff click the MLB in the Up arrow, or press . 4.2.6 Chord markers ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The left column of four boxes on the bottom of the Staff Window are the Chord markers for each staff. If the box is yellow, then there is at least one note on the staff in the current chord position. The black arrows to the left point to the current visible staffs. 4.2.7 Measure markers ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The right column of four boxes on the bottom of the Staff Window are the Measure markers for each staff. If the box has a black dot in the center, then the total beats in the measure match the time signature. If the box is red with a white dot, then the total beats does not match. 4.3.0 Note Selector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The note selector, located on the right of the screen, displays the current default note duration. Selected notes will be of this type. With the keyboard, activate the selector with . Then move the highlighted box to the desired note using the arrow keys. Press to make your selection. With the mouse, simply click on the desired note. For dotted notes, select the [ . ] icon. To tie all notes in the active staff, select the [TIE] icon. To set the current chord as part of a triplet, select the [3] icon. To delete all notes in the active staff, choose the [DEL] icon. In the Edit Window, the note duration may by changed by the '[' and ']' keys, or by dragging the MLB horizontally (see 4.5 Edit Window). 4.4.0 Rest Selector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The rest selector is used to enter music rests, and may be activated by pressing with the keyboard, or clicking the [Rest] icon with the MLB. Rests may only be added when the Edit Window is open. For dotted rests, choose the rest type first and then select the [ . ] icon. To delete a rest, choose the [DEL] icon. 4.5.0 Edit Window ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Items for this Section: 1. Opening and Closing 2. Description 3. Navigation 4. Add or delete a note 5. Sharp or flat a note 6. Tie a note 7. Create a triplet group 8. Merge notes 9. Measure End 10. Align measure 4.5.1 Opening and Closing the Edit Window ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ To open the edit window at the song pointer position, press , click the [Window] icon, or double-click the MLB. Once open, opens a new edit window before the current chord, and opens a new edit window over the current chord to allow merging of entered notes with existing notes (see 4.5.8 Merge notes). To close the edit window, press ,click the [Window] icon, or click the [ž] icon at the top right of the edit window. Press to close the edit window and reject any editing changes. 4.5.2 Edit Window Description ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The mode heading is displayed at the top right of the edit window. There are four edit modes available: 1. Edit -Edit the current chord 2. Add -Add new chord at end of measure 3. Insert -Insert a new chord before the current chord 4. Merge -Merge a new chord with the current chord The arrow along the left side of the edit window marks the current note position. This is the staff line or space that note editing occurs. A key position pointer along the bottom piano display marks the current piano key. When a note is selected, a small box will mark the corresponding piano key. Notes are displayed as hollow circles. If an accidental (sharp,flat,natural) is present, it will be displayed before the note. The number shown after the note is the note duration (1=Whole, 2=Half, 4=Quarter, 8=Eighth, 16=Sixteenth, 32=Thirty-two). Dotted notes are marked by a small dot next the note. The following icons are available: MLB click Keyboard Function ÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ [ ž ] Close Edit Window [Tab] Change staffs [Align] Align notes in measure [  ][  ] <-><-> Move to left or right chord [  ][  ] Go to first chord or last chord [Ins] Insert a new chord [Sound] Listen to current chord [End] End the measure [Undo] Undo edit changes To play the current song, enter

or click the [Play] icon. See 4.10 Song Settings for options relating to MIDI playback. See 4.11 Global Settings for options relating to chord sounds. See 5.2.2 Edit Window for a summary of all editing commands. 4.5.3 Edit Window Navigation ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Navigate the Edit Window with the <  > and <  > keys, or by moving the mouse within the window. To change the active staff, press or click the MLB on the [Tab] icon. The active staff will be marked by a highlighted clef symbol. 4.5.4 Add or delete a note ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ To add a new note, press , or click the MLB at the desired staff position. To mark the note with a finger number, press a number key between <1> and <5>. Number key <0> clears the finger marking. When a new note is added, it will be of the type marked by the highlighted note in the Note Selector at the right of the screen. To quickly change the duration of a new note, press the '[' and ']' keys or drag the MLB horizontally. Similarly, '[' and ']', or dragging both the MLB and MRB buttons horizontally changes the duration of all the notes in the active staff. To delete a note, press , or click the MRB at the note position. Dragging the MRB vertically deletes existing notes much like a pencil eraser. With the keyboard, press to delete all notes in the active staff. Alternatively, you may use a MIDI keyboard to input notes. When a key is played, the note is added to the edit window. If the note already exists, it will be deleted from the window. To access a staff positions that are out of bounds, move either staff up or down by activating the [+][-] icons next to the staff. See 4.2.4 Moving the staffs. 4.5.5 Sharp or flat a note ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A note may be made sharp or flat by pressing <+> or <-> on a existing note, or by dragging the note vertically with the MLB. 4.5.6 Tie a note ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A note may be tied to another by toggling or double-clicking the MLB at an existing note position. This is only necessary for the first note of a tied pair. Pressing , or activating the [TIE] icon in the Note Selector, will operate on all notes of the active staff. The symbol for the tied note is an 'x' in the note circle. 4.5.7 Create a triplet group ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ To mark the current chord as part of a triplet, press <3>, or activate the [3] icon in the Note Selector. A '3' symbol will appear at the top of the Edit Window. Three consecutive chord positions must be marked in this way to create a triplet group. 4.5.8 Merge Notes ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ With the Edit Window open, enables the Merge Mode. This mode is only necessary when two notes must occupy the same staff position. When positioning the Edit Window over an existing merged chord, only merged notes are available for editing. 4.5.9 Measure End ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Press or click the [End] icon to end the current measure with the conventional measure end symbol. If a measure end already exists, the Measure End dialogue box will open up. You may choose from a variety of measure end symbols. 4.5.10 Align measure ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Press or click [Align] to align the notes of the current measure. This will line up the notes on each staff in the correct beat positions. This way, notes may be entered on a staff without regard for the note positioning on the other staffs. After entry, align the new notes with those of the other staffs. 4.6.0 Chord Editing ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ There are three chord editing icons available: [Cut] (Scissors symbol) [Copy] [Paste] (Tape symbol The Cut and Copy operations save the notes in the Edit Window for future Pasting to other locations. Note that these functions are only active when the Edit Window is open. 4.7.0 Chord Selector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The Chord selector may be activated by pressing . Its functions may then be accessed with the corresponding hot-key. With the mouse, simply click on the desired icon. Items for this Section: 1. Predefined Chords 2. Chord Label 4.7.1 Predefined Chords ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The [Chord] icon will access the Chord Creation dialogue box. Select the chord and the type of chord from the selectors, and the staff(s) to which to create the chord. A display window shows a description of the selected chord with the chord symbol. If accepted, a chord will be created at the current chord position, on the selected staffs. 4.7.2 Chord Label ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ EZNOTE automatically creates labels that describe a chord. Set the text mode to 'lyric/chord' or 'chord label' in the Song Settings dialogue box () to have the chord labels displayed along the top of the notation window. The [Label] icon will access the Chord Label dialogue box. The default chord label is displayed, and may be overrided by a user label. To restore the default, select the [Default] icon. 4.8.0 Measure Selector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The Measure selector may be activated by pressing . Its functions may then be accessed with the corresponding hot-key. With the mouse, simply click on the desired icon. Items for this Section: 1. Set Clef 2. Key Signature 3. Time Signature 4. Measure Lyrics 5. Measure Editing 4.8.1 Set Clef ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The [Clef] icon opens the Set Clef dialogue box. Choose a Treble or Bass clef for each of the four staffs. The Mode selector contains three choices: (1)section, (2)song, and (3)current measure. Section mode is the default, and will change the clef of all measures up to the next clef change or end of song. Song mode changes the clef of every measure. Current measure mode changes the clef of the current measure only. 4.8.2 Key Signature ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The [Key] icon opens the Key Signature dialogue box. Fifteen key signatures are available to choose from. The default key signature is C (no sharps or flats). When adapting a song to a new key, be sure to change the key before transposing the notes. The new note values are always matched to the current key for proper positioning on the staff. See 4.8.5 Measure Editing for details about transposing. See 4.8.1 Set Clef for a description of the mode selector. 4.8.3 Time Signature ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The [Time] icon opens up the Time Signature dialogue box. You may set the number of beats per measure (numerator), and the note per beat (denominator). The default time signature is 4/4. See 4.8.1 Set Clef for a description of the mode selector. 4.8.4 Measure Lyrics ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The [Lyric] icon will open the Measure Lyrics dialogue box. 55 characters of text are allowed per measure. Lyrics entered here are displayed during playback. Set text mode to 'lyric/chord' or 'song lyrics' in the Song Settings dialogue box () to have the lyrics displayed along the top of the notation window. See 5.3 Text Editing for available text editing commands. 4.8.5 Measure Editing ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The [Edit] icon opens the Measure Editing dialogue box. The Measure Editing functions are divided into two groups. The first group (Cut,Copy,Clone,Transpose,Align) may operate on a range of measures, and may be selected by staff. The second group (Paste,Merge,Insert) may be repeated. Measure Buffer ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Cut and Copy functions save notation in the Measure Buffer. The size of the Measure Buffer is always displayed at the top right of the screen. The contents of the measure buffer may be pasted or merged at any point in the song. The Measure Buffer may also be exported to or imported from a file, so that song parts may be transferred between song files. The Measure Buffer is automatically cleared when a new song is loaded, or when memory has been exhausted. Staff checkboxes ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Select the staffs for which editing operations are active, by clicking in the staff checkbox or entering the corresponding number <1> to <4>. Enter or click [Staff] to toggle all staffs. Measure Range ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Select the measure range for which editing operations are active. The allowable range is 0 to 999. Press or click [All] to select all measures for the edit operation. The From-Measure and To-Measure may be marked with and respectively. Press or click [Range] to input this preset range. Cut ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter or click [Cut] to delete or clear the selected range of measures. If all staffs are selected, the measure range is deleted. Otherwise, the selected staffs are cleared within the measure range. Deleted or cleared measures are saved in the Measure Buffer for future pasting, merging, or exporting. Copy ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter or click [Copy] to copy the selected range of measures to be saved in the Measure Buffer for future pasting, merging, or exporting. Clone ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter or click [Clone] to copy the notes of a staff to another staff. Select only one staff to clone from. Afterwards, you will be prompted to enter the staff to clone to. Transpose ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter or click [Transpos] to transpose the notes on the selected staffs. Afterwards, you will be prompted to enter the number of steps to transpose. Enter a '-' to step downward. The allowable range is -12 to +12. When adapting a song to a new key, be sure to change the key before transposing the notes. The new note values are always matched to the current key for proper positioning on the staff (see Key Signature 4.8.2). Align ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter or click [Align] to align the notes on each staff in the correct beat positions. This way, notes may be entered on a staff without regard for the note positioning on the other staffs. After entry, align the new notes with those of the other staffs. Paste ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter

or click [Paste] to paste the contents of the Measure Buffer at the current song position. Pasted measures will be inserted before the current measure. The Measure Buffer is cleared following a Paste operation. Merge ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter or click [Merge] to merge the contents of the Measure Buffer starting at the current measure. The notation of each measure in the Measure Buffer will be combined with that of the current and subsequent measures of the song. If the end of the song has been reached, any remaining measures in the Measure Buffer will be appended to the song. The Measure Buffer is cleared following a Merge operation. Insert ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter or click [Insert] to insert a new empty measure before the current measure. Repeat ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ This parameter instructs EZNOTE as to how many times a given paste, merge, or insert operation is to be performed. The default is one time (1). 4.9.0 Song Statistics ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ opens the Song Statistics dialogue box. This box displays the staff Clefs, Key signature, Time signature, and beat flags. The staff Clefs are displayed as a "T" for a Treble clef, and a "B" for a Bass Clef. There are four such letters, each of which correspond to the four staffs S1 to S4. The beat flags indicate whether the total beats found in the staff match the time signature. A check mark (ū) indicates a match, and an asterisk (*) indicates an incorrect number of beats. You may select a measure to view by moving the highlighted bar to the desired measure and pressing or double-clicking the MLB. 4.10.0 Song Settings ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ opens the Song Settings dialogue box. All of the song settings in this window, with the exception of 'Text mode', are MIDI settings that affect MIDI playback. The MIDI channel, volume, patch(instrument) may be selected for staffs S1 to S4. Each staff may also be activated or deactivated. The Text mode sets the type of text to be displayed along the top of the Notation window. All settings are saved with the song. Tempo ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The tempo is the speed at which the song plays back. The default tempo for new songs is 100. Text Mode ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The Text mode icon selects the type of text that will be displayed at the top of the Notation window. Select 'lyric/chord' to display both lyrics and chord labels (default), 'song lyrics' for lyrics only, 'chord label' for chords only, or 'none' for no text printing. Channel ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The MIDI channel must be set between 1 and 16. In order to use different instruments for playback of all the staff parts of a song, the channel settings must be different for each staff. Volume ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The MIDI volume setting may range between 0 and 127. A volume of 0 will silence the staff. The default volume is 100. Patch(instrument) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The instrument selection conforms to the General MIDI standard set. 128 instruments are available to choose from. Enter or click in the instrument window to access a list of instruments to choose from. The default instrument for new songs is 1 (Piano). Staff Activity ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Toggle the staff's MIDI activity by clicking the staff checkbox or pressing to . An inactive staff will not sound in the Edit Window or during playback, or be exported to a MIDI file. 4.11.0 Global Settings ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Function key opens the Global Settings dialogue box. All settings are saved to a configuration file when the program ends. Chord Note Length ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ This parameter specifies the duration of individual notes of a chord, when sounded in the Edit Window. The allowable range is 0 to 480 ticks. (120 ticks = 1 Quarter note) Chord Arpeggio ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Arpeggio specifies the delay in ticks between individual notes of a chord, when sounded in the Edit Window. (120 ticks = 1 Quarter note) 4.12.0 Printing ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ opens the Printer Setup Dialogue Box. Printer settings are saved in a configuration file upon program exit. Printer driver ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Press

or click within the Printer window to select a printer driver. If you wish to import the graphics output into a word processor, select 'PCX Bitmap file'. Afterwards, you will be prompted for the name of this file, x-pixel width, y-pixel height, and the number of colors. Mode ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Press or click within the Mode window to select the printer mode. Depending on the printer driver selected, this may specify the resolution (dots-per-inch), paper size, or number of colors. Port ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Press or click within the Port window to select the printer port. LPT1, LPT2, COM1, and COM2 may be selected. If you select a serial port (COM1 or COM2), It is assumed that you have already set the port's communications parameters to match your printer (see DOS MODE command). If you wish to output to a disk file, select 'file'. Afterwards, you will be prompted for the name of this file. Orientation ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Press or click within the Orientation window to set the page orientation. Portrait Landscape ------- ------------- | | | | | | | | | | ------------- | | ------- Text mode ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Press or click within the Text mode window to select the type of text to print with the song. Select 'lyric/chord' to print both lyrics and chord labels (default), 'song lyrics' for lyrics only, 'chord label' for chords only, or 'none' for no text printing. Text size ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Press or click within the Text size window to specify the pixel height of printed text. Staff checkboxes ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Select the staffs to print by clicking in the staff checkbox or entering the corresponding number <1> to <4>. Measure Range ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Specify the range of measures to print. Press or click [All] to select all measures for printing (default). The From-Measure and To-Measure may be marked with and respectively. Press or click [Range] to input this preset range. Footer ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Press or click the Footer checkbox to toggle the footer text. When activated, the song title, page number, and measure range will be printed as a footer on each page. Magnify ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Press or click the Magnify checkbox to toggle magnification. When activated, the printed output will be magnified by a factor of 2. This may be useful for printer drivers that have a high resolution as its first mode. (eg. Epson 24 pin, IBM X24) -------------------- End of Chapter 4 ----------------------------------- 5.0.0 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß Chapter 5 Key/Mouse Command Summary ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ Sections in Chapter 5: 1. Function Keys 2. EZNOTE Editor 3. Text Editing 4. Slidebar 5.1.0 Function Keys ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Help File Save File Options Song Statistics Song Settings Global Settings Print Quit Mark From-Measure Mark To-Measure Available RAM 5.2.0 EZNOTE Editor ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Items for this Section: 1. General 2. Edit Window 5.2.1 General ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Hot-Key help window Chord selector Measure selector Note selector Rest selector Open Edit Window Play song

Cut chord Copy chord Paste chord Move/scroll left < - > Move/scroll right < - > Measure first chord Measure last chord Previous Staff Next Staff Top staff active Bottom staff active Top staff Up Top staff Down Bottom staff Up Bottom staff down 5.2.2 Edit Window ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Mouse Commands: ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ MLB Mouse Left Button MRB Mouse Right Button MBB Mouse Both Buttons drag Hold button down and move mouse dclk Double-click mouse button Open/Close edit MLB dclk Insert edit window MRB dclk Merge edit window Abort edit window Toggle active staff Select/Clear note MLB/MRB Clear all notes MRB drag Sharp current note <+> MLB drag up Flat current note <-> MLB drag down Toggle triplet <3> Toggle note tie MLB dclk Toggle all note ties Inc note length < ] > MLB drag right Dec note length < [ > MLB drag left Inc all note lengths < ] > MBB drag right Dec all note lengths < [ > MBB drag left Note position up <  > Note position down <  > Next higher note <  > Next lower note <  > Next note letter Add note, finger 1 <1> Add note, finger 2 <2> Add note, finger 3 <3> Add note, finger 4 <4> Add note, finger 5 <5> Clear finger number <0> Align measure Sound chord Measure end Undo 5.3.0 Text Editing ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Left 1 character < - > Right 1 character < - > Left 1 word < - > Right 1 word < - > First character Last character Delete character Delete previous char Delete to end of line 5.4.0 Slidebar ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Back one measure Forward one measure Back ten measures Forward ten measures First measure Last measure -------------------- End of Chapter 5 ----------------------------------- 6.0.0 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß Chapter 6 I N D E X ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ ßßßßßßßßßß A ÜÜÜÜÜÜÜÜÜÜ Add note 4.5.4 Advanced Gravis UltraSound 1.4.3 Align measure 4.5.10, 4.8.5 Arpeggio 4.11 ßßßßßßßßßß B ÜÜÜÜÜÜÜÜÜÜ Beat windows 4.2.2 ßßßßßßßßßß C ÜÜÜÜÜÜÜÜÜÜ Checkbox icon 2.11 Chord arpeggio 4.11 copy 4.6 create 4.7.1 cut 4.6 editing 4.6 label 4.7.2 markers 4.2.6 note length 4.11 predefined 4.7 selector 4.7 Clef set 4.8.1 Clone staff 4.8.5 Closing the edit window 4.5.1 Command line switches 1.3.2 Conventions used in guide 1.5 Copy chord 4.6 measure 4.8.5 Cut chord 4.6 measure 4.8 ßßßßßßßßßß D ÜÜÜÜÜÜÜÜÜÜ Deactivation of staff 4.2.3 Dialogue boxes 2.6 Directory list 3.2.3 Delete a note 4.5.4 Drivers for sound cards/MIDI interfaces 1.4.0 ßßßßßßßßßß E ÜÜÜÜÜÜÜÜÜÜ Edit measure 4.8.5 Edit window 4.5 End measure 4.5.9 Export buffer 3.1.7 lyrics 3.1.9 MIDI 3.1.5 ßßßßßßßßßß F ÜÜÜÜÜÜÜÜÜÜ File list 3.2 name 3.2.1 options 3.1 saving 2.9, 3.1.3 Finger marking 4.5.4 Flat a note 4.5.5 Free memory 2.8 Function keys 5.1 ßßßßßßßßßß G ÜÜÜÜÜÜÜÜÜÜ Global Settings 4.11 ßßßßßßßßßß H ÜÜÜÜÜÜÜÜÜÜ Hot-key Icon 4.2.1 ßßßßßßßßßß I ÜÜÜÜÜÜÜÜÜÜ Import buffer 3.1.6 lyrics 3.1.8 MIDI 3.1.4 Import MIDI file 3.3 Input filename 3.2 Insert measure 4.8.5 Installation 1.3.0 ßßßßßßßßßß K ÜÜÜÜÜÜÜÜÜÜ Key signature dialogue box 4.8.2 ßßßßßßßßßß L ÜÜÜÜÜÜÜÜÜÜ Label chord 4.7.2 Lyrics 4.8.4 ßßßßßßßßßß M ÜÜÜÜÜÜÜÜÜÜ Markers chord 4.2.6 measure 4.2.7 Math coprocessor 1.2 Memory 2.8 Measure buffer 4.8.5 editing 4.8.5 end 4.5.9 lyrics 4.8.4 markers 4.2.7 merge 4.8.5 range 4.8.5 selector 4.8 Merge measure 4.8.5 notes 4.5.8 MIDI import file 3.3 interface drivers 1.4.0 settings 4.10 MPU401 1.4.1 Music terms used in guide 1.6 ßßßßßßßßßß N ÜÜÜÜÜÜÜÜÜÜ Navigation of edit window 4.5.3 New file 3.1.2 Notation window 4.1 Note add 4.5.4 length 4.11 selector 4.3 ßßßßßßßßßß O ÜÜÜÜÜÜÜÜÜÜ Overview of program 1.1 Open file 3.1.1 edit window 4.5.1 ßßßßßßßßßß P ÜÜÜÜÜÜÜÜÜÜ Paste chord 4.6 measure 4.8.5 Play 4.5.2 Printing 4.12 ßßßßßßßßßß Q ÜÜÜÜÜÜÜÜÜÜ Quantize 3.3.4 Quit 2.1, 5.1 ßßßßßßßßßß R ÜÜÜÜÜÜÜÜÜÜ Repeat edit 4.8.5 Rest Selector 4.4 Roland MPU401 1.4.1 ßßßßßßßßßß S ÜÜÜÜÜÜÜÜÜÜ Save file 2.9, 3.1.3 Selectors 2.3 Settings global 4.11 MIDI 4.10 song 4.10 Sharp a note 4.5.5 Slidebar 2.2, 5.4 Sound Blaster 1.4.2 Sound card drivers 1.4.0 Staff 2.10 advancing 4.2.5 checkbox 4.2.3 moving 4.2.4 toggle active staff 4.5.3 window 4.2 Starting the program 1.3.1 Statistics 4.9 System Requirements 1.2 ßßßßßßßßßß T ÜÜÜÜÜÜÜÜÜÜ Text editing 5.3 icons 2.4 selector icons 2.5 Tie a note 4.5.6 Time signature 4.8.3 Track selection for MIDI files 3.3.1 Transpose 4.8.5 Triplet 4.5.7 ßßßßßßßßßß U ÜÜÜÜÜÜÜÜÜÜ UltraSound 1.4.3 ßßßßßßßßßß V ÜÜÜÜÜÜÜÜÜÜ Voyetra VMP sound card drivers 1.4.4 ßßßßßßßßßß W ÜÜÜÜÜÜÜÜÜÜ Warning Dialogue Box 2.7 -------------------- End of Chapter 6 -----------------------------------