DOCUMENT:Q102535  16-AUG-1993  [W_NT]
TITLE   :Using a Sound Blaster Pro with the Sound Blaster 1.x Driver
PRODUCT :Windows NT
PROD/VER:3.10
OPER/SYS:WINDOWS
KEYWORDS:

--------------------------------------------------------------------
The information in this article applies to:
 
 - Microsoft Windows NT operating system version 3.1
 - Microsoft Windows NT Advanced Server version 3.1
--------------------------------------------------------------------
 
When using the Sound Blaster 1.x driver provided with Windows NT to
run with the Sound Blaster Pro, the DMA channel must be set to 1.
 
The Sound Blaster 1.x driver has two settings for DMA: Off and DMA
channel 1. The Sound Blaster Pro has three settings: DMA channels 0,
1, and 3.
 
DMA channel 1 must be used because it is the only setting in common
between the adapter and the driver.
 
Additional reference words: 3.10 devdrvr
KBCategory:
KBSubCategory: HRDWR

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1993.