DOCUMENT:Q96270  20-JUL-1993  [W_NT]
TITLE   :Windows NT Does Not Detect SCSI Drive ID 6
PRODUCT :Windows NT
PROD/VER:3.10
OPER/SYS:WINDOWS
KEYWORDS:

--------------------------------------------------------------------
The information in this article applies to:
 
 - Microsoft Windows NT operating system version 3.1
--------------------------------------------------------------------
 
Summary:
 
Most SCSI hard disk drives are set to ID 6 by default. Windows NT
checks for ID 1 first and then ID 0. If Windows NT cannot detect your
SCSI drive, set your SCSI drive ID to 1, 0 (preferably), or any other
ID but the one the SCSI controller is using.
 
Additional reference words: 3.10 winnt

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1993.