======================================================================
  Microsoft(R) Product Support Services Application Note (Text File)
                      WG1129: UPDATED FILES FROM
            THE WINDOWS NT(TM) SERVER VERSION 3.5 CD-ROM
======================================================================
                                                   Revision Date: 1/95
                                                       1 disk included

The following information applies to Microsoft Windows(R) for 
Workgroups, version 3.11.

 -------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY     |
| ACCOMPANY THIS DOCUMENT (collectively referred to as an Application |
| Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER      |
| EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED      |
| WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR       |
| PURPOSE. The user assumes the entire risk as to the accuracy and    |
| the use of this Application Note. This Application Note may be      |
| copied and distributed subject to the following conditions:  1) All |
| text must be copied without modification and all pages must be      |
| included;  2) If software is included, all files on the disk(s)     |
| must be copied without modification (the MS-DOS(R)  utility         |
| diskcopy is appropriate for this purpose);  3) All components of    |
| this Application Note must be distributed together;  and  4) This   |
| Application Note may not be distributed for profit.                 |
|                                                                     |
| Copyright (C) 1995 Microsoft Corporation.  All Rights Reserved.     |
| Microsoft, MS-DOS, and Windows are registered trademarks and        |
| Windows NT is a trademark of Microsoft Corporation.                 |
 ---------------------------------------------------------------------

Introduction
------------

The WG1129 disk included with this Application Note contains six
updated Windows for Workgroups 3.11 files that are shipped on the
CD-ROM version of Microsoft Windows NT Server 3.5. These updated files
provide the following improvements:

 - Support for named pipes over direct host IPX

 - Performance enhancements to direct host IPX

 - A patch to prevent browse masters from synchronizing and announcing
   simultaneously

 - Changes to allow Windows NT remote administrators to work on
   Windows for Workgroups

 - Changes to allow browsing of Windows NT workgroups outside a subnet

 - Changes to allow Windows NT 3.5 servers to screen out older Windows
   for Workgroups clients trying to connect through direct host IPX

To install the updated files
----------------------------

1. If you received a disk with this Application Note, insert the disk
   in the appropriate floppy disk drive.

   If you downloaded this Application Note from an online service,
   skip to step 2. This procedure assumes that you have already
   downloaded and extracted the compressed file.

2. At the MS-DOS command prompt, type the following and press ENTER

      copy <source>:\net.exe <location>
   
   where <source> is either the letter of your floppy disk drive or
   the directory containing the file you downloaded from online
   services, and <location> is the path to your Windows directory. For
   example, if you are installing from a floppy disk that you inserted
   in drive A, and C:\WINDOWS is the path to your Windows directory:

      copy a:\net.exe c:\windows
   
   Or, for example, if you downloaded the WG1129.EXE file from online
   services to C:\DOWNLOAD and C:WINDOWS is the path to your Windows
   directory:

      copy c:\download\net.exe c:\windows

3. Copy the remaining five files to the Windows SYSTEM subdirectory
   one at a time. For example, type the following commands and press
   ENTER after each one:

      copy a:\ndis.386 c:\windows\system
      copy a:\netapi.dll c:\windows\system
      copy a:\nwnblink.386 c:\windows\system
      copy a:\vnetsetup.386 c:\windows\system
      copy a:\vredir.386 c:\windows\system

   The table below lists the new file sizes and dates:

      File            Size       Date
                     (bytes)
     ---------------------------------

     NDIS.386        27,846     9/4/94
     NET.EXE        450,262     9/4/94
     NETAPI.DLL     109,120     9/4/94
     NWNBLINK.386    37,964     9/4/94
     VNETSETUP.386   14,647     9/4/94
     VREDIR.386      85,746     9/4/94
   
4. Reboot your computer and restart Windows.