旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 쿔nterBBS User Record Information� 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 This file is provided for door and utility authors with a goal of clearly explaining the methodology used for reading and updating a user's record. It is current for version 1.0 of the software which will be released in early September, 1994. 旼컴컴컴컴커 쿍ackground� 읕컴컴컴컴컨컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 InterBBS version 1.0 utilizes 2 files for the storage of user account information. They are USERS and FNUSERS.INF. Each SIG (forum) has a file named SIG####.USR which contains last message read pointers and message related "flags". The "####" is the number of the SIG filled from the left with 0's. The first SIG is 0000. Each SIG has 3 additional SYSTEM files which control the bbs' operation: SIG####.@@@ - The CONFERENCE configuration file for each SIG. Contains pertinent information about each CONFERENCE within the SIG including required security levels, name of conference, location/name of conference message file and other information which is defined in the structure of the conference record located below. SIG####.LST - This file is a cr/lf delimited list of conference NAMES. The names are extracted from SIG####.@@@ by IBBSCFG.EXE (InterBBS configuration program). SIG####.SEC - This file contains a bit-map of each conference's public/private status. If the conference is PUBLIC the bit is set while a PRIVATE conference will have the bit cleared. InterBBS *does not* maintain or use the PCBoard USERS file bytes which hold the message flags and pointers for conferences 0-39. These are 15 bytes at offset 193 and 160 bytes at offset 225. 旼컴컴컴컴컴컴컴컴컴컴컴컴� 쿌ccessing the User Record� 읕컴컴컴컴컴컴컴컴컴컴컴컴좔컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 InterBBS utilizes 26 user index files for quickly locating a user's name during the logon process or when a caller addresses mail to other than "ALL". They are named FNPNDX.x ("x" is the first letter of the caller's first name). The SysOp record is ALWAYS record #1. The name in this record should be the same as the sysop's name entered in IBBSCFG. When a user logs on (locally or remotely), the user record # is derived from the signed integer in the user index file (FNPNDX.x). If the SysOp performs a quick login to the main menu, record #1 is used without accessing the user index file(s). The USERS file is a text/binary file with a 400 byte record for each user. The record obtained when the users index file is read is the one assigned for a given user. Users with the same name are permitted if the SysOp chooses (in IBBSCFG - General Information #1) to verify each user's City and State. Otherwise the search will terminate when the the first match occurs. When the user record is read, the 2 bytes at offset 385 contain a SIGNED integer with a record number in the SIG's SIG####.USR file which contains this user's Last Message Read Pointers and Bitmaps. All users are in SIG 0 when they login. The filename for LMR pointers and Bitmaps for SIG 0 is "SIG0000.USR". The SIG####.USR file is a variable length record file. Each user's record is the same length, but length of each user's record is solely dependent upon the number of conferences configured for the SIG. The size of each record in the SIG####.USR file is calculated in the following manner: 1) Number of conferences times 4. [LMR Pointers in SIGNED Long Ints] 2) Number of conferences divided by 8 rounded up. 3) Value in #2 times 4 (4 bit fields for each conference). Example BASIC Code to calculate the record length: ExtLmrLen& = Areas& * 4 ' Bytes needed Last Message Read Ptrs. BitLen% = Areas& \ 8 ' "\" is integer division operator in IF Areas& MOD 8 > 0 THEN ' MOD is Modulus Division ("%" in C). Bitlen% = Bitlen% + 1 ' Length of BASIC string which END IF ' contains a conference bitmap ' Bitlen% is the length of EACH bitmap (there are 4) ExtRecLen& = ExtLmrLen& + (Bitlen% * 4) ' Length of a user's record ' in the SIG####.USR file. The BITMAP flags are stored in the following sequence: 1) All the Conference scan flags (user wants to scan these conferences in global msg reading, QWK D/L) 2) All mail Waiting flags (user has mail waiting in these conferences) 3) All Joined Conference Flags (user has joined/allowed to join these conferences) 4) All Conference Co-SysOp Flags (user may read/delete any messages in a conference if he/she has a Co-SysOp bit set). Bit Flags: If a bit is non zero it is considered ON. A zero bit is OFF. If a user connects to the bbs, enters the name "IMA MODEMEN" the following demonstrates accessing the user's record in the USERS file followed by reading his/her message information from SIG0000.USR. 1) FNPNDX.I is scanned for "IMA MODEMEN". Let's say it was located and the SIGNED integer at offset 0 of the user index record was 450. 2) The USERS file is opened and the record number obtained above is read (400 bytes). Currently, InterBBS does not use a typed structure for the user record. The USERS file record layout is found in another section of this file (below). 3) The 2 bytes at offset 385 of the user record contain the "extended" user record number. This record number in the SIG####.USR file is then read to obtain the user's LMR pointers and conference bitmaps. (The bitmaps are explained below). Use the formula explained above to obtain the extended user record size for this SIG. Then seek to the part of the user's record you wish to read. Updating (and flushing to disk) a user's record before changing SIG's is required to keep a user's information up-to-date. Though this is pretty elementary, the SIG approach InterBBS uses does create room for a programming over-sight. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 旼컴컴� 쿝ecap� 쳐컴컴좔컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � � � � File names and naming conventions for the user-related system files � � have been specified and explained. � � � � � The method for determining the users record size in the SIG####.USR� � file has been explained. � � � � � Reading a user's record in the USERS file and in the current SIG's � � extended user file (SIG####.USR) has been explained. � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� When the message base is locked for message insertion, only the 6 bytes starting at offset 16 (positions 17 through 22) are "LOCKED". This permits normal message reading even if the above bytes are locked. Previous versions of InterBBS placed the word "LOCKED" in the locked field to indicate the message file was being written. This means of indicating the message file header is LOCKED is still supported since some older message manipulation utilities may still use the old method. 旼컴컴컴컴컴컴컴컴컴� 쿢SERS File Locking � 읕컴컴컴컴컴컴컴컴컴좔컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 InterBBS locks the entire user record (400 bytes) when the USERS file is being updated. Other programs encountering a locked USERS file record should loop until the lock is removed. This should rarely be more than about 1/2 second (that is a conservative estimate). On a network with several nodes in operation this could be longer when a SERVER has a heavy disk i/o workload. 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � Message Handling Information� 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴좔컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� InterBBS version 1.0 closely follows the PCBoard version 15.0 message handling. There are a few exceptions and those exceptions are now discussed. InterBBS uses the PCBoard message structure because it has proven to be an excellent medium for storage and retrieval of messages. Its structure facilitates extremely quick searches for text within messages and lends itself (again) to very quick exporting of messages into the QWK format created by Mark (Sparky) Herring. It is possible InterBBS will optionally support another popular message base API in the future. � InterBBS's method of file attachments differs: We use a database method of maintaining file attachments. Each conference may have a path specified for file attachments. If a path is specified, this enables file attachments for the conference. Each conference with file attachments *should* have a UNIQUE ATTCHMENT SUB-DIRECTORY specified. The database is located in the attachment sub-directory for a conference and is named "#####.ATT" where #### is the conference number. The attachment database record BASIC structure is: Type AttachMent StoredName AS STRING * 12 ' FileName stored in attach sub-dir RealName AS STRING * 12 ' FileName when Uploaded Size AS LONG ' File Size Stored in SIGNED Long Int End Type Note that the conference number is one higher than the conference joined. Example: MAIN BOARD (CONF 0) would have an attachment database named "1.ATT". This file is located in the attachment sub-directory specified in the conference 0 configuration (see structure below). When a file is attached to a message, InterBBS checks for the existence of a file with the SAME name (ignoring the extension (if any)). The name of the file is changed to FILENAME plus an extension of ".###" where ### begins at "000" and any subsequent files uploaded with the SAME name (ignoring the extension) will be given the next higher number up to 999. The database is scanned for the first BLANK (spaces) record (indicative of a deleted attachment) and if one is found that record # is assigned the new attachment otherwise a new record is created in the database. A SIGNED integer at offset 122 (bytes 123,2) of the message header holds this record number. When a message is read, the value of the SIGNED integer at offset 122 is checked. If it is < 1000 and greater than 1 then an attachment is assumed and The database record is read (SIGNED integer). If the attached file is downloaded or viewed after the message is read, the stored name is first copied to the WORK sub-directory as the REAL name. � InterBBS' method of Return Receipts (RR) Differs: InterBBS utilizes byte 125 (offset 124) of the message header to indicate a return receipt is requested/present. When a RR is requested as a message is saved, offset 124 (byte 125) of the message header will contain an ASCII 1 (""). When the user that message is addressed to has read the message, InterBBS will generate a RR which places an ASCII 4 ("") at offset 124 (byte 125) of the message header. InterBBS generate a new message to create the RR. When a RR notice is read by the person to whom it is addressed, the message is automatically deleted. � InterBBS supports only private ("*") and public (" ") mail status codes (offset 0 in the message header). This may be expanded in the future. Mail Status codes other than "*" (PRIVATE) are considered PUBLIC. � InterBBS supports only the following extended message header fields: "TO " - TO Name (or address for internet) "FROM " - FROM Name (or address for internet) "SUBJECT" - Subject of the message Note: If more extended message header fields *must* be supported, please notify us by calling 813-249-8322 (voice) or 813-249-8422 (bbs). �袴袴袴袴袴袴袴袴袴袴袴袴袴� � CONTROL FILES - SIG.LST � 훤袴袴袴袴袴袴袴袴袴袴袴袴菰袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴� The SIG.LST file (SIG List File) is comprised of fixed length records using the following BASIC structure. Type SigDataRec Sec AS INTEGER ' This is a SIGNED Integer Desc AS STRING * 30 ' NOT null terminated Intro AS STRING * 32 ' NOT null terminated End Type InterBBS will *always* have at least 1 (one) record in the SIG List file (for SIG 0). The ONLY part of the record which really *controls* anything is the "Sec" element. The "Sec" element may contain a numeric range from 0-255 which are the security levels allowed in InterBBS. The "Desc" element is a short description of the SIG. This is displayed to a caller when the SIG is joined ("SIG ####"). The "Intro" element is the path and name of a text file to be displayed to a caller when the SIG is joined. If none is specified, InterBBS does not display the "missing file" notice to the caller. The total size of the structure is 64 bytes. It is important to check the size of the SIG List file to determine the number of sigs. There is no configuration item which accepts the number of SIGS to configure. Using a suitable method, read LINE 216 of the SRCONFIG file (located in the NODE sub-directory). This is the PATH & NAME of the SIG List file. Divide the Size of the SIG List file by 64 to determine the number of SIG's. Seek to the offset of the record you are accessing and read in the structure or merely read the SIGNED integer at the offset of the record if that is all the information you need from the record. �袴袴袴袴袴袴袴袴袴袴袴袴袴袴� � CONTROL FILES - SIG####.@@@� 훤袴袴袴袴袴袴袴袴袴袴袴袴袴菰袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴� The SIG####.@@@ is the conference "control" or definition file. It contains all pertinent information about each conference in the SIG. The first 2 bytes of the file are a SIGNED integer which contains the size of the structure (900 bytes for InterBBS v1.0). 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � To read conference #2's RECORD, the following BASIC code is used: � � 'RecNum% is 2 � � 'ConfSize& is 900 as determined when we read the SIGNED int� � 'One is a CONST (1) � � 'SigRec is Our Type Structure � � '"3" is used to seek to the file position. (OPTION BASE 1) � � 'C or Assembler would use a "2" (OPTION BASE 0) � � GET FileNum%, (ConfSize& * (RecNum% - One)) + 3, SigRec � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 The structure of the "record" follows. TYPE ConfNames ' SIG####.@@@ file RECORD Structure Maildir AS STRING * 40 ' Path/name of Conf message File Bname AS STRING * 25 ' Name of Conference Xfer AS STRING * 35 ' DIR Listing File name ("DIR.LST") DpathNm AS STRING * 30 ' DLPATH.LST File name ("DLPATH.LST") UpathNm AS STRING * 30 ' Public Upload FIle Directory Path PrivPathNm AS STRING * 30 ' Private Upload Directory path UlDirFile AS STRING * 30 ' Public Upload DIR Listing File Name PrivDirFile AS STRING * 30 ' Private Upload DIR Listing File Name DirMenFile AS STRING * 30 ' DIR Listing Menu File Name IsEcho AS STRING * 1 ' Is this conf. to be echoed (Char 0=no; 1=yes) AccLvl AS STRING * 1 ' Security Lvl Req'd to enter conf. (0-255) RepLvl AS STRING * 1 ' Security Lvl Req'd to REPLY to msg (0-255) WritLvl AS STRING * 1 ' Security Lvl Req'd to ENTER a msg (0-255) IsPub AS STRING * 1 ' Is this a public conf (Char 0= no; 1=yes) NumMblks AS STRING * 1 ' Number of message Blocks - 1 block=1024 msgs UpDirlvl AS STRING * 1 ' Public Upload Directory Security level PrivDirlvl AS STRING * 1 ' Private Upload Directory Security level IndexFile AS STRING * 30 ' Path And name of DIR Index file (if any) DoorMen AS STRING * 30 ' Path And name of Door menu File DoorData AS STRING * 30 ' Path And name of Door Data File BltnMen AS STRING * 30 ' Path And name of bulletin menu File BltnLst AS STRING * 30 ' Path And name of Bulletin List File PrivateOnly AS STRING * 1 ' Private mail ONLY conference ' \\\\\\\\\ ConfNewsFile AS STRING * 30 ' Private mail ONLY conference ' \\\\\\\\\ PubLicOnly AS STRING * 1 ' Public mail ONLY conference ' \\\\\\\\\ AttachToDir AS STRING * 30 ' Private mail ONLY conference ' \\\\\\\\\ CoSysOpName AS STRING * 25 ' Co-SysOp's name (if any) for SYSOP mail GraphicsQ AS STRING * 1 ' GrapHics Quoting Cussing AS STRING * 30 ' CussWord File Path/name AliasOK AS STRING * 1 ' Alias Name ok in This conf ReceiptSec AS STRING * 1 ' Return Receipt Security Level ConfPw AS STRING * 15 ' Password to Join Conf (if <> " ") ConfConfNews AS STRING * 35 ' Conference NEWS File ConfMainMenu AS STRING * 35 ' Conference MainMenu File (MM) ConfSysOpMainMenu AS STRING * 35 ' Conference Sysop main Menu ConfConfmenu AS STRING * 35 ' Conference ConF Menu ConfSysOpConfmenu AS STRING * 35 ' Conference Sysop Conf Menu ConfConflst AS STRING * 35 ' Conference Conference List File Name ConfFilemenu AS STRING * 35 ' Conference File menu ConfSysOpFilemenu AS STRING * 35 ' Conference Sysop File Menu ViewDirsok AS STRING * 1 ' ViewDirsok Yes / No LongHeader AS STRING * 1 ' Allow Long TO, From Addresses ForceEcho AS STRING * 1 ' Force All mail in conf as ECHO UseOldNdx AS STRING * 1 ' Use the Old Style MSGS.NDX File Future AS STRING * 43 ' Reserved and UnUsed END TYPE Note that the STRINGS are NOT null terminated. The "IsPub" element may be ignored *if* you utilize bitmap in the SIG####.SEC file. The message INDEX files have .NDX (for OLD Index) and .IDX (NEW Index) extensions appended to the path & name of the message file. �袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴� � CONTROL FILES - NODEINFO.DAT � 훤袴袴袴袴袴袴袴袴袴袴袴袴袴袴菰袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴� InterBBS uses NODEINFO.DAT as a node "status" and control file. The file format has changed from the previous use of the PCBoard 14.2 USERNET.DAT file format to better support numerous nodes and to provide a means for quickly detecting changes in any nodes status. With version 1.0 of the software, the NODEINFO.DAT file was modified by using the first 128 byte record of the file as a BITMAP. Currently, InterBBS uses the first 32 bytes of this record for node login/logoff flags. The bits used for this are 0-254 which support nodes 1-255 respectively. For example, when a caller is logging in or logging off the system AND the SysOp has enebled login/logoff broadcasts to other nodes in IBBSCFG (General Information #2), the BIT for that NODE will be set for three seconds. After the three second "wait" for other nodes to detect the login/logoff, the BIT is then cleared. IF login/logoff broadcasts are enabled on a node (each node is controlled individually) the NODEINFO.DAT file is checked every 3 seconds when a user is in the system and NOT entering a message or file description. The entire 128 byte record is currently read and those login/logoff BITS for the active nodes are checked. If one is found to be SET that nodes records is then read and the login/logoff is broadcast to the caller on the node performing the check. The process loops until all nodes have been checked (practically no delay). Once all nodes have been checked AND there has been a login or logoff, there will be a delay of 1 and 1/18th seconds to allow the affected node to clear its login/logoff bit. A node setting its BIT (logging in / logging off) will pause 3 seconds for other nodes to check the BITMAP. InterBBS DOES NOT presize the NODEINFO.DAT file to support the maximum number of nodes the software is designed for. The file is extended as new nodes are added up to the maximum supported. The structure of the NODEINFO.DAT follows: Type NodeRecord Status AS STRING * 1 ' Node's Current Status Flag PageOK AS STRING * 1 ' Is this node accepting a Chat Page PagedBy AS Integer ' Either a "0" for not paged or a node# ' Note that this allows a user to be ' paged while in chat unless the PageOK ' flag is turned off. ChatWith AS Integer ' # = Node# or Group#. 0 = N/A. ' Indicates the node number or group # ' the user is IN chat with (or 0=N/A) UserNm AS STRING * 25 ' Name of User on this Node UserFm AS STRING * 24 ' Where the user is from (City/State) Waiting AS Integer ' The Node has paged the node # here ' and is "WAITING" in the chat module ' for the "paged" node to enter chat. Reserved AS STRING * 7 ' Filler & Extra up to 128 Bytes/Record NodeMsg AS STRING * 64 ' Node-Node msg (From Chat Module) End Type Current Node STATUS codes are (ASCII): 1 = Available for Chat 2 = Waiting for a Call 3 = Transferring a File 4 = Entering a Message 5 = Group Chat (Group ###) 6 = Chatting with Node ### 7 = Opened a Door 8 = Front End in Control 9 = Unavailable for Chat 10 = Logging into Node ### 11 = Logging off Node ### 12 = Stealth Mode "Stealth Mode" is given for a node which has used the "HIDE" command from the main menu. This command toggles STEALTH mode. If a node is STEALTH, the exact status of that node is unavailable to users on other nodes. �袴袴袴袴袴袴袴袴袴袴袴袴袴敲 � CONTROL FILES - SRCONFIG � 훤袴袴袴袴袴袴袴袴袴袴袴袴袴姦袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴� This is the main BBS configuration file. It is a cr/lf delimited text file and it is created by IBBSCFG in each NODE directory. A sample SRCONFIG file with a short description of the contents follows: ENTRY LINE DESCRIPTION 컴컴컴컴컴컴컴컴컴컴컴컴� 컴컴 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� The BBS 1 Name of your BBS IMA MODEMEN 2 Sysop's name C:\IBBS 3 BBS program main directory 1 4 Number of this node C:\IBBS\NODE1 5 This node home directory 140 6 Max messages per archive run 115 7 Userfile edit access (remote sysop access 1 8 Lock com port at opening baud rate 1=yes, 0=no COM1 9 Comport for this node (com1-4) ATZ 10 Modem reset string 57600 11 Baud rate which to open com port 30 12 New user's access level 1 13 Questionnaires used? 1=yes, 0=no 25 14 Secs for modem to wait to connect C:\IBBS\NODE1\WORK\ 15 Node work directory (all deleted) 3 16 Number of questionnaires available 1200 17 Lowest baud rate to allow onto BBS 1 18 Use the Today function? 1=yes,0=no 000 19 Registration Number (000 if Unreg) 20 Unused by InterBBS v1.0 1000 21 Min K-bytes on U/L drive for U/Ls 8 22 Number of bulletins available 23 - unused - 24 - unused - 30 25 Days before subscription expired warning file displayed 10 26 Expired sec level when subscrip- tion expires) 1 27 Subscription mode desired? 1=yes, 0=no 0 28 Ringback option desired? 1=yes, 0=no 45 29 Seconds to wait for ringback? 0 30 Frontdoor program is used? 1=yes, 0=no 0 31 Running under DESQview?1=yes, 0=no 1 32 "Uploaded By:"in file description? 1=yes, 0=no 0 33 Want high ASCII filter? 1=yes,0=no C:\IBBS\SECMSGS\ 34 Location of security files 0 34 Minutes before modem is reinitial- ized C:\IBBS\FILES\CF0000\HOLD 36 Duplicate U/L hold directory path 30 37 Sec lev required to D/L files 30 38 Sec lev required to U/L files 30 39 Sec lev to enter Files area 1 40 Graphics at local logon? 1=yes, 0=no 0 41 Force users into door at logon? 1=yes, 0=no 1.5 42 Upload time credit factor. 43 - unused - 1 44 Warn if files flagged at logoff? 1=yes, 0=no 1 45 Ask to set msg pointers at logoff? 1=yes, 0=No 46 - unused - 47 - unused - 48 - unused - 49 - unused - Y 50 Permit swapping to EMS/XMS/Disk? 1=yes, 0=no 50 51 Sec lev to list users? 52 - Unused - 1 53 Allow private personal transfers? 1=yes, 0=no C:\IBBS\FILES\CF0000\UPL 54 Private personal file xfer file directory path 0 55 3 second pause after connect=<2400 0=yes, 1=n0 50 56 Sec lev to archive and D/L msgs 1 57 Enable split screen chat? 1=yes, 0=no 1 58 Always ask users to select xfer protocol? 1=yes, 0=no 2 59 Number of nodes configured for 1 60 Enable auto-ANSI detect at logon? 1=yes, 0=no 0 61 Default subscription in days (0-999) for new users 00:00 62 Sysop available start time (page) 23:59 63 Sysop available stop time (page) 0 64 Allow one name users (handles)? 1=yes, 0=no 0 65 Allow login as sysop from remote? 1=yes, 0=no F F 1^m 66 1/10 shifted F-keys - defined 67 2/10 shifted F-keys - defined 68 3/10 shifted F-keys - defined 69 4/10 shifted F-keys - defined 70 5/10 shifted F-keys - defined 71 6/10 shifted F-keys - defined 72 7/10 shifted F-keys - defined 73 8/10 shifted F-keys - defined 74 9/10 shifted F-keys - defined J 0 R-^M 75 10/10 shifted F-keys - defined 1 76 Enforce the above sysop availiab- ility for chat? 1=yes, 0=no 77 Path/name of program to run before & after transfers &H3F8 78 Serial port base address &H4 79 IRQ number to use C:\IBBS\IBSYS\IBBSTEXT 80 Path/name of the "IBBSTEXT" file 0 81 - unused - 1010 82 Number of lines users allowed to read from archive 255 83 Sec lev req'd to kill own message 255 84 Sec lev req'd to list [T]odays callers 100 85 Sec lev req'd to carbon copy msgs C:\IBBS\MENU\MM 86 Path/name of Main menu file C:\IBBS\MENU\CM 87 Path/name of Conference menu file C:\IBBS\MENU\FM 88 Path/name of File menu file C:\IBBS\QUES\QUEM 89 Path/name of Script questionaire menu C:\IBBS\DISP\PRELOG 90 Path/name of Prelogin welcome file C:\IBBS\DISP\NEWS 91 Path/name of News file C:\IBBS\HELLO1 92 Path/name of After login Welcome file C:\IBBS\DISP\NEWUSER 93 Path/name of New User welcome file C:\IBBS\DISP\CLOSED 94 Path/name of text file shown to new users if system is private C:\IBBS\LOGS\CALLER1 95 Path/name of Caller log file C:\IBBS\DISP\EXPWARN 96 Path/name of Expired subscription Warning file C:\IBBS\DISP\EXPIRED 97 Path/name of Expired Subscription lapse notice file C:\IBBS\QUES\SCRIPT.0 98 Path/name of New user script questionaire file C:\IBBS\\DISP\LOGOFF 99 Path/name of Logoff file (shown after the [G]oodbye) C:\IBBS\DISP\TODAY 100 Path/name of "TODAY" text file (if used) C:\IBBS\DISP\PREDL 101 Path/name of PreDownload Warning file C:\IBBS\DISP\PREUL 102 Path/name of PreUpload Warning file C:\IBBS\DISP\USRSTAT 103 Path/name of the User Statistics Information file 255 104 Sec lev req'd to Kill any message 255 105 Sec lev req'd to Edit any message 110 106 Sec lev req'd to enter @ macro messages 255 107 Sec lev req'd to [R]ead any msg 110 108 Sec lev req'd to view callers log 50 109 Sec lev req'd to user [VER] command 100 110 Sec lev req'd to edit own messages 110 111 Sec lev req'd to edit user info 50 112 Sec lev req'd to view [B]ulletins 50 113 Sec lev req'd to leave a [C]omment 50 114 Sec lev req'd to use [D]oors 50 115 Sec lev req'd to view [H]elp files 50 116 Sec lev req'd to [J]oin a conf 50 117 Sec lev req'd to [L]ist files 50 118 Sec lev req'd for [N]ew file dir scan 50 119 Sec lev req'd to page [O]perator 50 120 Sec lev req'd to change [P]age length 110 121 Sec lev req'd for unlimited time 50 122 Sec lev req'd to answer [Q]ues- tionnaries 50 123 Sec lev req'd for [S/SS]can/super scans 50 124 Sec lev req'd to [S]elect msg scan 50 125 Sec lev req'd to toggle [S]creen color mode 50 126 Sec lev req'd for [TP], transfer protocol 50 127 Sec lev req'd to [V]iew user's statistics 50 128 Sec lev req'd to [V]iew archive 50 129 Sec lev req'd to view [W]elcome file 50 130 Sec lev req'd to toggle e[X]pert mode 50 131 Sec lev req'd for [Z]ippy scan 70 132 Sec lev req'd for [*] global new messages read 1 133 Show bulletin menu if new Bltns? 1=yes, 0=No 10 134 Suspend callers before event (in minutes) C:\IBBS\USRNDX\ 135 Path to the "FNPNDX.x" user index files C:\IBBS\DISP\CL 136 Path/name of conf listing file C:\IBBS\HELP\ 137 Path to "Custom" help files 138 No Longer Used 1 139 Ask "Do you want color at logon?"? 1=yes, 0=no 1 140 Number of "rings" before sending modem answer command C:\IBBS\IBSYS\PWRD 141 Path/name of the "PWRD" file 142 Unused -1 143 Load IBBSTEXT into memory?(faster) -1=yes, 0=no 1 144 Confirm the [G] (logoff) command? 1=yes, 0=no 70 145 Sec lev required to U/L attached file HIJ 146 Slow drive letters Y 147 Take modem off-hook during event C:\IBBS\QUES\ 148 Location of script questionnaires 0 149 0=Open system, -1= Closed system 0 150 Use sysops real name? -1=yes, 0=no 151 - unused - 152 - unused - 1 153 Parallel printer port assigned C:\IBBS\IBSYS\FNUSERS.INF 154 Path/name of "FNUSERS.INF" file C:\IBBS\IBSYS\CUSSWRN 155 Path/name of the Profanity Warning file C:\IBBS\DISP\QUOTES.BBS 156 Path/name of BBS quotes file 1 157 Display USRSTAT at logon: 1=y,0=n C:\IBBS\DISP\POSTUL 158 Path/name of Post Upload file C:\IBBS\DISP\POSTDL 159 Path/name of Post Download file C:\IBBS\DISP\FAILUL 160 Path/name of Failed Upload file C:\IBBS\DISP\FAILDL 161 Path/name of Failed Download file C:\IBBS\CHAT\ 162 Location of Chat files C:\IBBS\DISP\CHTM 163 Path/name of Group Chat menu 6 164 Maximum number of rooms available in group chat 1 165 Verify callers city/state at logon 0=yes, 1=no C:\IBBS\MENU\CLS 166 Path/name of sysop message menu C:\IBBS\MENU\MM 167 Path/name of sysop main menu C:\IBBS\MENU\FMS 168 Path/name of sysop file menu 1 169 Force mail to be read at logon? 1=yes, 0=no C:\IBBS\IBSYS\ 170 Path to SIG####.@@@ file(s). C:\IBBS\IBSYS\ 171 Path to SIG####.LST file(s). C:\IBBS\IBSYS\USERS 172 Path/Name of "USERS" file C:\IBBS\IBSYS\ 173 Path to SIG####.USR file(s). 150 174 Maximum number of lines allowed in message editor C:\IBBS\IBBSPROT.DAT 175 Path/name of "IBBSPROT.DAT" file F 176 "A"=Async serial driver,"F"=Fossil C:\IBBS\IBSYS\FREE.LST 177 Path/name of FREE.LST file 0 178 Charge users time for D/L Free files? 1=yes, 0=no 50 179 Sec lev for "*" Quick logon C:\IBBS\IBSYS\TRASH 180 Path/name of "TRASH" file C:\IBBS\IBSYS\IBPML.DAT 181 Path/name of Multi-Language File C:\IBBS\IBSYS\MAIN.CMD 182 Path/name of MAIN Command Trans- lation file. C:\IBBS\IBSYS\MSG.CMD 183 Path/name of MSG Command Trans- lation file. C:\IBBS\IBSYS\FT.CMD 184 Path/name of FILE TRANSFER Command Translation file. C:\IBBS\IBSYS\PAY.LST 185 Path/name of PAID D/L Files .LST file. Note: The next 6 items expect HEX numbers. 1E 186 Color for Message Header CONF Line 4F 187 Color for Message Header DATE Line 78 188 Color for Message Header TO Line 5F 189 Color for Message Header FROM Line 30 190 Color for Message Header SUBJ Line 9 191 Color for TEXT Entry 1 192 Tell other nodes when a caller logs on? 0=no; 1=yes 1 193 Allow nodes to send other nodes 1-liner messages with the /w command when in node/group chat. 0=no; 1=yes 200 194 Max messages <= 2400 baud callers may download per day. 32767 max. 400 195 Max messages <= 4800 baud callers may download per day. 32767 max. 1000 196 Max messages <= 9600 baud callers may download per day. 32767 max. 2000 197 Max messages <= 14400 baud callers may download per day. 32767 max. 10000 198 Max messages > 14400 baud callers may download per day. 32767 max. 200 199 Max messages <= 2400 baud callers may D/L in a QWK packet. 32767 Max 400 200 Max messages <= 4800 baud callers may D/L in a QWK packet. 32767 Max 1000 201 Max messages <= 9600 baud callers may D/L in a QWK packet. 32767 Max 2000 202 Max messages <= 14400 baud callers may D/L in a QWK packet. 32767 Max 10000 203 Max messages > 14400 baud callers may D/L in a QWK packet. 32767 Max C:\IBBS\MENU\QWKM 204 Path/name of QWK menu file. C:\IBBS\IBSYS\QWKCRC.DAT 205 Path/name of crc-32 dupe database Note: Any of the next 9 items with an "*" (asteric) following the item number are MANDATORY! PROGINN 206* BBS ID - Contact HUB if Applicable (813) 885-5718 207* BBS Phone Number � The Programmer's Inn � 208 Origin Line (tagline). D:\SLMR 209* Sub-Dir to IMPORT .REP packet from D:\SLMR 210* Sub-Dir to EXPORT .QWK packet to D:\IBBS\RIPS\HELLO1 211 Path/name of WELCOME file to add to .QWK packets. D:\IBBS\RIPS\NEWS 212 Path/name of NEWS file to add to .QWK packets. D:\IBBS\RIPS\LOGOFF 213 Path/name of GOODBYE file to add to .QWK packets. TAMPA, FL. 214* Location of your BBS. D:\IBBS\RIPS\SIGMEN 215 Path/Name of SIG MENU file. D:\IBBS\IBSYS\SIGDATA 216 Path/Name of SIG LIST file. 4E 217 Color for Message Header READ Line. 400 218 Lines in Scroll-Back Buffer. D:\IBBS\DISP\HMR 219 HMR/LMR Pointer Menu Path & Name 0 220 Exit to DOS after each call? 0=No ATM0H1 221 Modem OFF-HOOK Command D:\IBBS\IBSYS\ 222 InterBBS System Files Subdirectory