Graphical User Interface Versions of Trade Wars Helper Release 8.7 Copyright 1994 Just FUN Software All Rights Reserved This zip file contain two specialized versions of Trade Wars Helper that incorporate the Graphical User Interface. The data files are totally compatible between these two version and the standard version. All commands in the standard version are available in these two versions. The two version are called the "Real Mode" version and the "Protected Mode" version. The protected mode version requires a 286 or higher machine with extended memory (but you should really have a 486 or it will be too slow). Both require a VGA monitor and pointing device (mouse) to utilize the Graphical User Interface (GUI). Using the GUI is optional and requires a special registration code. Users who initially registered a release prior to 8.3 must pay a $5.00 upgrade charge to receive the GUI key (see ORDERGUI.TXT file). Users who initially registered release 8.3 or later already have the GUI key since they paid a higher registration fee. Even if you are not registered you can look at the GUI. To do so enter TWHGUIRM to start the program, enter a 1 to select the EXAMPLE data file, and click a mouse button to activate the GUI. When done enter /q to quit the program. You could also start the TWHGUIPM program to be sure the protected mode version operates on your machine. The /w command will display the amount of memory still available. INSTALLATION INSTRUCTIONS Unzip this ZIP file to the \twhelp directory. Respond with an A to the "Overide..." message. Create two batch files (TWHRM.BAT and TWHPM.BAT) in the directory of your communications program like below. They changes to the twhelp directory, executes the appropriate twhelp w/GUI version, changes back to your communication program's directory, makes sure the monitor is in text mode and then exits the DOS shell. TWHRM.BAT TWHPM.BAT cd \twhelp cd \twhelp twhguirm twhguipm cd \(comm-prog-dir) cd \(comm-prog-dir) mode co80 mode co80 exit exit (comm-prog-dir) means the name of your communications program directory. Although not required to view the example data file, program modules from the standard versions archive (TWHELP87.ZIP) are normally required for these versions to operate. You may wish to print out the RUNNING INSTRUCTION and IMPORTANT GUI POINTS of this file and read them over from time to time. If you would like assistance installing Trade Wars Helper w/GUI call (801) 272-6238 10:00am to 8:00pm Mountain time (not always available). Using the protected mode version essentially puts another layer of software to work which increases the overhead (i.e slower performance) and the likelyhood of failure. Obviously if it runs too slow for your tastes or does not work on your machine then use the standard version or, with enough conventional memory, the real mode version. If it does fail to run on your machine, I would appreciate a call so I can learn of the situations in which it is failing and hopefully take corrective action at some time. RUNNING INSTRUCTIONS Run your communications program, login to a BBS and start the Trade Wars door. When Trade Wars begins building its title screen, shell to DOS from your communications program and enter the batch file name appropriate to the game you are playing. Once TWH has sent and processed it orientation commands (the TW G, V and I commands) press a mouse button to activate the GUI. Press the End key to return to text mode. The following is a summary of the three versions. Version Name: Standard Real Mode Protected Mode Batch file name: TWH TWHRM TWHPM GUI available: No Yes Yes Maximum sectors: 5000 4000-5000 5000 Performance: 100% 85% 70% Extended memory: No No Yes Related Notes: The maximum sectors for the standard and real mode version is dependent on the conventional memory available. Read the "Insufficient Memory" section the README file if you are unable to use a large data file. Since the protected mode version uses extended memory, there will almost always be sufficient memory available for a 5000 sector universe. If you get the "Loader Error 0001 - Out of Memory" it means you don't have enough extended memory available for the protected mode version which requires about 700K. Try allocating less to smartdrive, etc. Because protected mode programs run slower than real mode programs you should try to use the real mode version for a game first. Users with a maximum of conventional memory may be able to play in a game with 5000 sectors using the real mode version while those with a minimum of conventional memory may not be able to use the real mode version in even a 4000 sector game. Performance is degraded when in graphics mode because characters written to the screen are software generated as opposed to hardware generated characters when in text mode. Thus the performance of the real mode version will be the same as the standard version when the GUI is not being used. One way of improving performance is to run with the TW color off. This is done by entering the TW commands C N in V2B5 games and C N 1 in MBBS games. Programs running under Windows suffer a further performance degradation. Thus running the protected mode version under Windows using the GUI is a bit slow to say the least. WARNING! I personally experienced several system crashes when running the protected mode version with Windows. At this time I don't know if this is hardware or setup problem unique to my system, a conflict between Windows and the Borland DPMI programs or a problem with TWHGUIPM. IMPORTANT GUI POINTS The following are points related to the Graphical User Interface (GUI). The GUI is activated by pressing a mouse button usually at the "Command" prompt. To return to text mode press the End key or any of the keys that display the scrollback buffer (Home, End, PgUp, PgDn, Up Arrow, Down Arrow). Clicking on some of the buttons (Port, Land, TW Computer and TW Main Cmds) also returns to text mode. It is recommended the TW animation be turn off in version 2.00 games as the pictures appear garbled in the smaller GUI CRT area besides taking extra time to display. Remember to press the ESC key or the ESC and Enter keys a few time when things hang up due to TWH getting out of synch with TW. Also if the GUI screen gets clobbered or you loose the arrow cursor, press the End key then click a mouse button to refresh the screen. While in GUI mode you can enter TW or TWH commands using the keyboard as in text mode or you can click on a graphics button or line showing the TWH commands with the mouse. Most of the TW main commands and all of the TW computer commands can only be enter using the keyboard. The Map button displays the graphics map in the window, the Pairs button is the /X command, the Trade button is the /t command, the Goto button is the /g command, the Explore button is the /2e command, and the Attack button is the /A command. The Port button is the TW P command while the Land button is the TW L command. The Move button displays the TW move options, the Zip button is the TWH /z command and the Scan button is the TW S command. They, like some of the other buttons, are not active when offline. Many of the buttons (Map, Pairs, Trade, Go to, Explore, Move and Zip) and TWH commands perform their function for the sector number display below the column of numbers in the upper right corner (mostly zero to start with). The value in this digits display can be set by clicking on one of the numbers above it using the left mouse button, clicking on the current sector (left side of screen), clicking on a sector number in the graphics map, clicking on a sector number in the columns displayed by the various TWH database commands or by typing / then the number and pressing the Enter key. The value in the digits display can be sent to TW by clicking on the digits display itself. The values in the column of numbers above the display can be set to the digits display value by clicking on one of the slots with the right mouse button. The bottom two slots in the column of numbers are set by TWH to the previous values of the digits display when it is changed. The top two slots should contain sectors 1 (set by TWH) and the Starport sector (set by user by typing /number Enter, then click on slot 2 with right mouse button). The value in the digits display is equivalent to the value enter after the / when using the keyboard. When this value is cleared (all zeros) the current sector number is used. For example, to trade in the current sector, either clear the digits display or make it show the current sector, then click on the Trade button. To initiate cross trading between the current sector and another sector, make the digits display show the other sector number and click on the Trade button. To show the fighters nearest a sector, make the digits display show the sector number, click on the TW Database button and then click on the /f command line. Commands that require two numeric parameters such as /3,235h or /1245,123G must be entered using the keyboard. IMPORTANT: Because the digits display is used by many buttons and commands, be sure to check if for a correct value before clicking on a button or command line. The CRT screen area allows 8 lines of TW data to be displayed in a scrolling mode. It runs slower than the full CRT screen that is used in when in text mode. It is initially set at the fastest speed as indicated by the gauge to the left of the Info button. On some fast machine this may scroll by too quickly and can be slowed down by pressing the F2 key, speed up by pressing the F3 key or toggled between fastest and most recent slow speed by pressing the F4 key. These function key can be pressed when TWH is idle or waiting for the SPACE BAR to be pressed. The F1 key display a list of the various function keys. Use the End key and PgDn key to display the scrollback buffer if some text scrolled out of the CRT area you want to review. The time and turn gauges are reasonably correct but the other readouts on the left side of the screen may not be 100% accurate at all times. For instance, the readouts are not updated while on the planet. Also attacking without using the Attack button will leave the fighter and shield information out-of-date. This is because TWH can only update these values when they are sent by TW across the modem and it knows to do so. When deemed appropriate, such as when leaving a planet, TWH will send the TW I command to update the readouts but not show the information coming across the CRT screen to increase performance. This will cause a slight delay before you can enter a command after leaving a planet. The program will light up the "Info" button when this is happening - which you can also click on to bring these values up-to-date. Do so when exact information is required! Also the readouts in List 2 are only updated by the Info button. When the "Press SPACE BAR..." message is displayed you can optionally click a mouse button. Also while in text mode some of the processes, such as pressing Enter at the RTO screen, can be exited with the mouse button. COPYRIGHT Copyright laws apply to both shareware and commercial software, and the copyright holder retains all rights, with the following exception. The unmodified program files, complete with the files discussed below, may be freely copied and distributed. It is in fact encouraged. If you like this program, please tell your fellow players, even those evil traders, about it and upload it to several BBSes. Of course, registrations key may not be distributed. DISCLAIMER Trade Wars Helper is supplied on an "as is" basis. The author disclaims all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The author assumes no liability for damages, direct or consequential, which may result for the use of Trade Wars Helper. FILES This product is made up of the following files. README.1ST - Text file for first time users. DOCGUI.TXT - The file you are now reading. FILE_ID.DIZ - A description of this product for PCBoard systems. TWHGUIRM.EXE - The real mode version of TWHELP w/GUI. TWHGUIPM.EXE - The protected mode version of TWHELP w/GUI. EXAMPLE.CFG - A configuration file for using the EXAMPLE database. EXAMPLE.TWH - This file contains an example database. RTM.EXE - These three programs are redistributed with permission DPMI16BI.OVL - of Borland International and are required to be in the BGI16.DLL - current directory for the protected version to operate. This product may be distributed only when all the above files are included in the distribution in unmodified form. Program modules from the standard version archive are required for this version to operate. QUESTIONS, COMMENTS OR SUGGESTIONS All questions, comments or suggestions of any nature are welcomed. You need not be a registered user to ask questions, or make comments or suggestions. Include the release number of the program you are using in any problem description. Address correspondences to: Attn: Mike Ingham Just FUN Software 4790 Naniloa Drive Salt Lake City, UT 84117-5547 or telephone: (801) 272-6238 (preferred method) or via Prodigy: NKJM79A or via CompuServe: 71231,3727 or Internet: mingham@intele.net If you wish to download the latest version of this program or any other products from Just FUN Software on the first call, dial the Just FUN Software BBS at 801-278-8839 and logon as "Just Fun" with a password of "software" or set up your own account.