Help file for PENTHOUSE 05/25/91
.S
25
6

The Menu Name is a label that appears on the
Startup Menu.  You can make separate entries
to log onto PENTHOUSE and other interactive
services on Minitel system.  Enter a label
or description (20 characters max) to identify
each setup in the Startup Menu.

Press [ENTER] or the down arrow to continue.

.S
25
9

To automate your setup to log onto PENTHOUSE
enter your PENTHOUSE Id here.  Options:

 - if you enter your PENTHOUSE Id and Password
   (below), then you will automatically log
   onto your Id every time you call;
 - if you enter your Id but leave the Password
   blank, then you must type your Password and
   the code PET every time you call;
 - if you leave BOTH the Id and Password blank
   then you must manually enter your Id and 
   Password and type PET every time you call.
.S
4
11
To automate your setup to log onto PENTHOUSE, enter your PENTHOUSE
Password here.  Options:
- if you include your PENTHOUSE Id (above) and enter your Password here
  you will auto-logon to PETLINE every time you call;
- if you entered your Id, but leave the Password blank, then you must
  manually type your Password, then type PET to connect to PETLINE;
- if you leave BOTH the Id and Password blank, then you will manually
  have to enter your Id and Password, type PET every time you call.

NOTE:  the security of your PENTHOUSE Id is dependent on knowledge of
       the Password. To ensure that no unauthorized person may log
       onto your PENTHOUSE Id, DO NOT enter your Password here.
.S
4
1
Press Function key F5 to select the local access number from the
Telephone directory or just enter the local access Phone Number. (Press
[SHIFT] F5 for the international Telephone Directory.) Move in the
Directory with the up and down arrow keys, Pg Up and Pg Dn, or by
pressing the first letter of the state. Press [ENTER] to select a phone
number.  If you need to modify the number to include any extra dialing
digits, edit the number by using the arrow keys. For example:
 - to dial 9 for an outside line:  9,391-0370
 - to pause two seconds:  8~~391-0370
.S
21
1
If you used Function key F5 to select the local
access Phone, then the correct access method is
automatically entered. If you manually type in
the Phone Number, then use the left or right
cursor keys to select the correct Access Method.
.S
25
6

Use the arrow keys to select the serial
port number for the modem.
If you don't know the port number, follow
these general guides:

 - for an external modem, choose port 1
 - for an internal modem, choose port 2
 - for machines with multiple serial devices
   try ALL ports 1-4.

If the modem doesn't respond when trying to
dial, you should try changing the port number
and attempt dialing again.

.S
25
9
The minimum speed is 1200 baud.  You should
only set the baud rate to 2400 baud if:

 1.) your modem supports 2400 baud access
       --  AND  --
 2.) if the local access phone number also
     supports 2400 baud.

Check the Telephone Directory for a list of
2400 baud access numbers, identified by the
++ code.

Use the arrow keys to change the speed.
.S
25
12

The setting for your video display adapter
is set automatically to the highest mode
that your computer supports (CGA, EGA/VGA
Hercules, MCGA/PS2.)  Normally, you won't
need to change this setting.

.S
4
15
Specify the subdirectory pathname where files downloaded from
PENTHOUSE should go. The subdirectory C:\PET\DB is the default.
You can change both the drive and the pathname, i.e.:

   A: or B:    floppy drive A: or B:
   \WS\DOCS    drive C:\WS\DOCS directory
   D:\WP5\BL   drive D:\WP5\BL directory
.S
25
1

The default modem dialing prefix is ATDT.
You may need to change this dialing prefix
to ATDP if your phone service only supports
pulse dialing (not touch-tone service.)
You can also include any valid modem 'AT'
commands and modifiers to give additional
instructions to the modem, if needed.

Press [ESC] to save your setup.
