DOCUMENTATION CHANGE NOTICE Product/Manual: WORDPERFECT 5.1 REFERENCE Manual Dated: 03/90 Machines: IBM PC and Compatibles The documentation changes are divided in two sections: New Information contains additions or changes to the manual which represent modifications to the WordPerfect program. Typographical Errors and Minor Corrections contains typographical corrections and changes to the manual which do not represent modifications to the WordPerfect program. New Information CONVERT PROGRAM Page(s): 92 Corrected screen to show new option. CONVERT PROGRAM Page(s): 93 Added C DisplayWrite to bottom of input file list. CONVERT PROGRAM Page(s): 95 Added following information immediately above Filename Patterns: DisplayWrite to WordPerfect Converts DisplayWrite to WordPerfect. For information on the .CRS prompt, see Revisable-Form-Text below. DOCUMENT SUMMARY Page(s): 157 Changed second sentence of second paragraph under Information Entries to: You can type in a subject or you can move to the status line in the Document Summary menu, press Retrieve (Shift-F10), then type y to retrieve the first 160 characters of the Subject entry from the document (see Subject Entries below). DOCUMENT SUMMARY Page(s): 158 Changed last sentence of first paragraph under Subject Entries to: It then copies the text immediately following the RE: (up to 160 characters or the next Hard Return code [HRt]) into the Subject entry. EQUATIONS, COMMANDS AND SYMBOLS Page(s): 190 Changed first sentence of second paragraph under Dynamic Operators (Delimiters) to: There are eight dynamic operators: OVER, LEFT, RIGHT, SQRT, NROOT, BINOM, LONGDIV, and LONGDIVS. EQUATIONS, COMMANDS AND SYMBOLS Page(s): 196 Changed first sentence of paragraph above Spacing Commands to: If you want to insert line breaks into your equation, use the pound sign the MATRIX, STACK, or STACKALIGN commands. EQUATIONS, COMMANDS AND SYMBOLS Page(s): 196 Changed paragraph under Spacing Commands to: Three commands that you can use to manually adjust the spacing of your equation within the equation box are HORZ, VERT, and LINESPACE. See Equations, Commands Syntax in Reference for details on these three commands. EQUATIONS, COMMANDS SYNTAX Page(s): 198 Added following information to end of # (pound sign) paragraph: At the outermost level of an equation, the pound sign can be used by itself to separate lines in an equation (e.g., a=b-c # a=d+3). EQUATIONS, COMMANDS SYNTAX Page(s): 202 Changed text under VERT n to: where n is the percentage of the current font size to move in a relative direction to the right or left for HORZ and up or down for VERT. If the number is positive, the direction is right or up; if the number is negative, the direction is left or down. For example, if you are using a 12 point font and type HORZ 100 x=y, the equation is moved 12 points (approx. 1/6") to the right. EQUATIONS, COMMANDS SYNTAX Page(s): 204 Added following information immediately above MATFORM paragraph: LONGDIV This command creates the long division character over the accompanying variable. The long division character expands to cover the variable. The syntax is LONGDIV x. LONGDIVS Does the same thing as LONGDIV, but leaves the left end of the long division character straight. EQUATIONS, COMMANDS SYNTAX Page(s): 204 Added following information immediately before MATFORM paragraph: LINESPACE This command allows you to change the vertical line spacing within STACK, STACKALIGN, and MATRIX structures. The command must be place before any of these structures, and the syntax is LINESPACE n where n is the percentage of normal line spacing for these structures. For example, LINESPACE 200 is double line spacing. GRAPHICS, FORMATS AND PROGRAMS Page(s): 238 Added Border Options under Other paragraph. GRAPHICS, CONVERSION PROGRAM Page(s): 252 Added following information immediately above /g=16 paragraph: /f=# After a color or gray scale conversion (with /c or /g), you can use this option to change the fill color. # represents the following colors: 1=Black 6=Magenta 2=Blue 7=Brown 3=Green 8=Gray 4=Cyan 9=Dark Gray 5=Red GRAPHICS, CONVERSION PROGRAM Page(s): 252 Changed numbering of options under /b=# to: 1=Black 5=Red 2=Blue 6=Magenta 3=Green 7=Brown 4=Cyan 8=White GRAPHICS, CONVERSION PROGRAM Page(s): 253 Added following information after /o paragraph: /w As WordPerfect 5.1 converts HPGL plotter files, all measurements are scaled, including pen widths which are interpreted as the standard (.35mm) pen width before the conversion. WordPerfect 5.0 translated pen widths as "hairline" with no width conversion. If you still want WordPerfect to translate pen widths as hairline, start the 5.1 Graphics Conversion Program with the /w startup option. GRAPHICS, CONVERSION PROGRAM Page(s): 253 Added following information immediately above /o paragraph: /n=# After a color or gray scale conversion (with /c or /g), you can use this option to change the line color. # represents the following colors: 1=Black 6=Magenta 2=Blue 7=Brown 3=Green 8=Gray 4=Cyan 9=Dark Gray 5=Red GRAPHICS, EDIT Page(s): 270 Added following paragraph immediately before Go To paragraph: DrawPerfect This option enables you to go directly into DrawPerfect to edit a graphics image. It is explained in detail in the WordPerfect Shell DrawPerfect Users Guide that accompanies the DrawPerfect documentation. GRAPHICS, FORMATS AND PROGRAMS Page(s): 277 Added following line under Microsoft Chart: Microsoft Excel HPGL Yes GRAPHICS OPTIONS Page(s): 285 Added following information after first paragraph under Border Style: To make settings for each type of border you can create (e.g., Single, Thick), select Border Options (Shift-F8,4,8). This menu determines the appearance of the border type you select. INITIAL SETTINGS Page(s): 325 Added following information two paragraphs prior to Repeat Value heading: Changes to the Size Attribute Ratio option only affect printer definitions. In order for the changes to take effect in the printer definition, you must update the definition (see Update under Printer, Select in Reference). After updating the definition, documents saved with that printer selected will reflect the changes. KEYBOARD LAYOUT Page(s): 336 Changed second and third paragraphs under Original to read: You can also switch to the original keyboard from anywhere in WordPerfect by pressing Ctrl-6. Unlike the Original option, Ctrl-6 temporarily selects a keyboard. If you don't use the Original option or select another keyboard on the Setup: Keyboard Layout menu, the keyboard you selected prior to pressing Ctrl-6 will be in effect the next time you start WordPerfect. To switch back to the keyboard you selected without exiting WordPerfect, press Ctrl-6 twice. To disable the Ctrl-6 option, use the /no startup option (see Appendix N: Startup Options). LIST FILES Page(s): 387 Changed first sentence under Redisplaying List Files to: If you have been displaying files or directories from your hard drive, you can press List (F5) twice in a row to redisplay the most recently displayed List Files screen. LOCKED DOCUMENTS Page(s): 396 Changed second sentence of italicized paragraph at the bottom of the page to: The password can contain no more than 23 characters. LOOK Page(s): 399 Changed fourth sentence under Cursor Movement to: Screen Up (-) and Screen Down (+) move the cursor up or down through the document one screen at a time. Added following sentence to end of first paragraph under Cursor Movement: Page Up (PgUp) and Page Down (PgDn) move to the next or previous document. MACROS, MACRO EDITOR Page(s): 419 Deleted "or Escape (Esc)" from step 2. MEMORY Page(s): 456 Changed first sentence under /r Startup Option to: If you have at least 592K of unused expanded memory (LIM Spec 3.2 or 4.0), the WP.FIL file portion of the WordPerfect program can be loaded into memory by starting WordPerfect with wp/r. MEMORY Page(s): 456 Added following sentence to end of first paragraph under Expanded Memory: For more information, see /32 in Appendix N: Startup Options. MERGE Page(s): 463 Changed second sentence of first paragraph to: Records using the {NEXT RECORD} or {FIELD NAMES} commands (see Appendix K: Macros and Merge, Programming Commands) are the only exceptions to this rule. MOUSE SETUP Page(s): 473 Added following information above Double-Click Interval: Assisted Mouse Pointer Movement This option determines whether WordPerfect moves the mouse pointer to the first selectable item when the menu bar or a WordPerfect menu is displayed. OTHER FORMAT Page(s): 492 Added following information immediately above See Also: Border Options This menu determines the appearance of the border types you can select for both graphics boxes and tables. OUTLINE, DEFINE Page(s): 501 Added the following between the words "options" and "affect" in second paragraph under Outline, Define: (with the exception of Automatically Adjust to Current Level) OUTLINE, DEFINE Page(s): 503 Added following information immediately before last paragraph under Enter Inserts Paragraph Number: If this option is set to Yes and Outline is on, you can insert a hard return without inserting a paragraph number by pressing Ctrl-v before pressing Enter. Similarly, pressing Ctrl-v before pressing Ctrl-Enter will insert a hard page break. OUTLINE, DEFINE Page(s): 504 Added following information to end of second paragraph under the screen: If you want a paragraph number to be a Roman numeral at its own level and an Arabic numeral when attached to subsequent levels (e.g., I., 1.1, 1.11), select Uppercase Roman/Digits if Attached (X) or Lowercase Roman/Digits if Attached (x). PARAGRAPH NUMBERING Page(s): 534 Deleted "(particularly Automatically Adjust to Current Level)" from second italicized paragraph on the page. PRINTER PROGRAM Page(s): 567 Changed paragraph under Font Libraries heading to read: Font libraries are groups of fonts. Shareable font libraries may have any name (up to 36 characters). Non-shareable font libraries have the exact name as the printer for which they were created. Fonts in a shareable library can be copied to a non-shareable library and vice versa, but only shareable libraries can be copied from one .ALL file to another. You can use the Printer Program to create and copy fonts within a .ALL file or shareable font libraries from one .ALL file to another. This is useful when you have added fonts from a third-party software company (e.g., Bitstream Inc.) to your 5.0 .ALL files, and you want to copy them to the 5.1 file. Changed step 1 to read: Retrieve the 5.0 .ALL file that has the fonts you need into the WordPerfect 5.1 version Printer Program. If it is a 5.0 file, type y when you are prompted to convert the file. Changed step two to: Highlight the printer you want to edit and press Enter. Changed step 4 to: Select Add (1), then press Ctrl-Enter. Changed step 5 to: Enter a name to create a shareable font library or press Enter without entering a name to create a non-shareable font library. Deleted sentence under step 6. Changed note under step 7 to: If you convert a 5.0 .ALL file, all font libraries will have the same name as the printer because they are non-shareable. PRINTER PROGRAM Page(s): 568 Deleted sentence under step 9. REPLACE Page(s): 599 Added following bulleted item below Math Operators bulleted item: Merge Codes SPELLER UTILITY Page(s): 649 Screen replaced by the most recent Speller Utility screen. SPREADSHEET, IMPORT AND LINK Page(s): 656 Changed paragraph that talks about supported versions to read: As of this printing of the WordPerfect Reference Manual, the Spreadsheet Import and Spreadsheet Link features can import files from PlanPerfect (versions 3.0 through 5.0), Lotus 1-2-3 (versions 1.0 through 2.2), Microsoft Excel (versions 2.x), Quattro, and Quattro Pro. STYLE, CREATE Page(s): 677 Added following information above Graphics paragraph: Generate Some features that must be generated (e.g., Cross-Reference, Subdocuments, and Endnote Placement) are not allowed in styles. TAB SET Page(s): 692 Changed sentence above See Also to: Hard Tab codes do not change when you change the type of tab stop settings which precede them in a document. TABLE, CREATE Page(s): 704 Changed first sentence in paragraph under Spreadsheets to: You can import data from a PlanPerfect, Lotus 1-2-3, Microsoft Excel, Quattro, or Quattro Pro spreadsheet into a table. TABLE, EDIT STRUCTURE Page(s): 712 Added following italicized sentence immediately below the screen: You can determine the appearance for each style with the Border Options menu (Shift-F8,4,8). TYPEOVER Page(s): 751 Added italicized paragraph between first and second paragraphs under Codes that reads: The exception is Tab codes. You can type over Tab codes. APPENDIX M: PULL-DOWN MENUS Page(s): 771 Changed first sentence to: You can enter ASCII characters by holding down Alt and typing the corresponding number on the number pad (do not use the numbers at the top of the keyboard). APPENDIX C: CODES Page(s): 781 Added following information under [Box Num] code: [Brdr Opt] Border Options APPENDIX C: CODES Page(s): 782 Deleted [Full Form] code and accompanying description. APPENDIX C: CODES Page(s): 783 Deleted [Mark:ToA] code and accompanying description. APPENDIX C: CODES Page(s): 783 Added following code and accompanying description immediately below [Note Num] code and description: [Open Style] Open Style APPENDIX C: CODES Page(s): 783 Deleted [Outline Lvl] code and accompanying description. Added following codes and descriptions immediately above [Outline Off] code: [Outline Lvl; Open Style] Open Outline Style [Outline Lvl; Style On] Paired Outline Style On [Outline Lvl; Style Off] Paired Outline Style Off APPENDIX C: CODES Page(s): 784 Added following code and description immediately above [Txt Opt] code and description: [ToA] Table of Authorities Entry APPENDIX C: CODES Page(s): 784 Added following code and description under [Undrln] code and description: [Unknown] Non WordPerfect 5.1 Code APPENDIX D: EQUATION PALETTE Page(s): 788 Added following command after BINOMSM: LINESPACE Vertical Spacing LINESPACE n APPENDIX D: EQUATION PALETTE Page(s): 788 Added following information immediately above Functions paragraph: LONGDIV Long Division LONGDIV x LONGDIVS Long Division (straight) LONGDIVS x APPENDIX E: ERROR MESSAGES Page(s): 809 Changed first sentence of Solution to Invalid Printer Definition String to: If you have not added information to the printer definition using PTR, rename the .PRS file and reselect the printer. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 861 Changed second and third sentences under "Merge" example to read: The {CASE CALL} command allows the user to select the author by number. If a correct number is not selected, the {ELSE} case executes the routine again. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 896 Changed last sentence of second paragraph to: In this case, the {NEST PRIMARY} command does not use one of the 10 nest levels. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 917 Changed first {ELSE} line under "Macros" example for {SHELL MACRO} command to read: {ELSE} {IF SYSTEM}ShellVer~=0~ APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 917 Changed first sentence of second paragraph under {SHELL MACRO} command to read: This command is only available if you have Shell version 3.0. Changed first comment under "Macros" example for {SHELL MACRO} command to read: {;}If Shell is version 3.0 or later~ Changed comment under second {ELSE} line under "Macros" example for {SHELL MACRO} command to read: {;}Otherwise (if a Shell is running but is a version earlier than 3.0~ APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 924 Changed # 97 to: Hyphen APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 928 Added following value immediately above 1 Extra Large: 0 Normal Added following paragraph just above Cell (2) system variable: If two attributes are present, their respective numbers will be added together. APPENDIX N: STARTUP OPTIONS Page(s): 965 Added following startup option after wp/x: wp/32 APPENDIX N: STARTUP OPTIONS Page(s): 966 Changed information under filename to: Retrieves the specified file from the documents directory (or the default directory is no documents directory is specified) when WordPerfect comes up. APPENDIX N: STARTUP OPTIONS Page(s): 966 Changed paragraph under /nc to read: Disables the Cursor Speed and Alt Key Selects Pull-Down Menu features. In rare instances, these features may conflict with TSR (Terminate and Stay Resident) software or some hardware. The /nc option is especially useful when WordPerfect does not start up at all. APPENDIX N: STARTUP OPTIONS Page(s): 967 Changed first sentence under /r to: Loads about 580K of menus, error messages, and overlays from WP.EXE and WP.FIL into expanded memory, in addition to the memory normally required by the program (see Memory in Reference). APPENDIX N: STARTUP OPTIONS Page(s): 968 Added following information immediately before DOS SET Command: /32 Instructs WordPerfect to use LIM 3.2 calls only. This helps WordPerfect run on some expanded memory drivers that are not LIM 4.0 compatible. APPENDIX O: TROUBLESHOOTING Page(s): 975 Changed second sentence of paragraph that begins with "Try selecting..." to: If the document prints incorrectly, you should check the printer manual or consult your printer manufacturer for menu or switch setting requirements for your printer. APPENDIX P: WORDPERFECT CHARACTERS Page(s): 981 Added characters 102-147 to Character set 10. APPENDIX Q: WORDPERFECT FILES Page(s): 987 Added following information immediately above LABELS.WPM: INLINE.WPM This macro sets up the necessary codes for creating an equation in a line of text. It then places you in the Equation Editor. For more information about equations, see Equations in Reference. Typographical Errors and Minor Corrections GETTING STARTED Page(s): 11 Corrected spelling of "install" in second sentence of italicized paragraph. GETTING STARTED Page(s): 19 Fixed misaligned type. BLOCK Page(s): 46 Corrected spacing problem in second and third sentences on the page. Made le ft become left. CENTER TEXT Page(s): 66 Changed third paragraph under Dot Leader to: You can also insert a dot leader using the Home keystrokes (see Hard Center Tab) below). CENTER TEXT Page(s): 67 Changed third sentence on the page to read: WordPerfect inserts a [CENTER] code in the document. CURSOR MOVEMENT Page(s): 108 Corrected spacing in line that reads, "First Line on the Next Page." DOCUMENT SUMMARY Page(s): 154 Corrected screen to spell Sculpture correctly. DOS AND WORDPERFECT Page(s): 163 Added caron ^ to the list of characters that can be used in a filename. EQUATIONS, COMMANDS AND SYMBOLS Page(s): 194 Changed first sentence on page to read: For example, to produce the following equation with a horizontal row of dots on the baseline, type x DOTSLOW x_n EXIT Page(s): 209 Changed information under Backtracking to read: If you change your mind during the exiting process you can press Cancel (F1) at the Save or Exit prompts to return to the document on the screen. FOOTNOTES AND ENDNOTES Page(s): 229 Changed pointer B to read: Footnote before code. FORMAT Page(s): 237 Changed last sentence in 1st paragraph under codes to: They do not appear in the normal editing screen, and they cannot even be seen at the top of your document when you use Reveal Codes (Alt-F3). GO TO Page(s): 244 Changed "Goto" in mouse note under step one to "Go to" GRAPHICS, FORMATS AND PROGRAMS Page(s): 277 Changed HIJAAK to HiJaak. LANGUAGE Page(s): 360 Changed Mouse Note under step one to read: Select Other from the Layout menu. MACROS, CONVERSION PROGRAM Page(s): 405 Changed first sentence of Important paragraph to: The Macro Conversion Program file (MACROCNV.EXE) needs to be installed properly before using the program. MACROS, DEFINE Page(s): 409 Changed last sentence in paragraph under Chaining Macros to read: The following example describes how to chain macro B to macro A without using the macro editor. MACROS, MACRO EDITOR Page(s): 417 Changed second sentence of paragraph above Editing an Existing Macro to read: If the command displays a menu (e.g., Font), the Macro Editor inserts a {MENU OFF} before the command and a {MENU ON} after the command (e.g., {MENU OFF}{Font}{MENU ON}F). MACROS, MESSAGE DISPLAY Page(s): 430 Corrected both spacing problems ("don't" and "positioning") in first sentence under first screen. MACROS, MESSAGE DISPLAY Page(s): 431 Changed second comment under second example to read: {;} If flag was set (RC was turned off) by above commands~ MARGINS, TOP AND BOTTOM Page(s): 435 Corrected spelling of "allow" in first sentence of paragraph above See Also. MERGE Page(s): 461 Second pointer B points at {FIELD} in the salutation. MERGE Page(s): 465 Changed second sentence on page to read: If Cancel has been turned off (see {CANCEL OFF} in Appendix K: Macros and Merge, Programming Commands), press Ctrl-Break to cancel the merge. MERGE Page(s): 466 Changed next to last sentence under Initial Codes to read: Inserting the tab setting in Initial Codes, however, sets the tabs only once for the entire file. MOUSE SUPPORT Page(s): 476 Changed fourth paragraph under Feature and Option Selection to read: You can also click on prompts such as "Press List" to select the key to which the prompt refers. OTHER FORMAT Page(s): 492 Changed example character under Overstrike to a zero with a slash. OUTLINE, DEFINE Page(s): 502 Changed first sentence under Automatically Adjust to Current Level to: This option tells WordPerfect the level an automatic paragraph number in an outline should have when it is inserted. PAGE FORMAT Page(s): 518 Changed last sentence of paragraph under Codes heading to: In general, these codes should be placed at the top of the page before any Column On codes. SEARCH Page(s): 620 Changed first sentence under Words to: When you are searching for a particular word that is surrounded by two spaces, press the Space Bar to include spaces before and after the word. STYLE, CREATE Page(s): 676 Changed both occurrences of Create (1) to Create (3). TAB SET Page(s): 692 Changed [Rt Tab] code under Type of Settings column to: [Rgt Tab] TABLE, CREATE Page(s): 694 Changed pointer B to say Column C. TABLE, CREATE Page(s): 702 Changed first sentence of third paragraph under Move to: If you use Block to move or copy the entire table (structure and text), you must include both the Table Definition and Table Off codes in the block. Changed fourth paragraph under Move to: When you move or copy table text (without the table structure), the text is separated into columns by tabs and into rows by hard returns. APPENDIX E: ERROR MESSAGES Page(s): 802 Changed first sentence of Solution to Disk Full message: You can either delete some unwanted files on your disk to make more room or insert another formatted disk into the drive. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 856 Changed first {PROMPT} line under "Merge" example for {BREAK} command to read: ~{PROMPT}Counting...{VARIABLE}Counter~~{COMMENT} APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 860 Changed sentence before {CASE CALL} command to read: See the Merge subheading under {COMMENT} for an example of how to use these commands. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 861 Changed {CASE CALL} line under "Merge" example to read: ~{CASE CALL}{VARIABLE}Author~~ APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 872 Changed last sentence under "Macros" example to: See the Macros subheading under the following commands for additional examples: {CASE}, {CASE CALL}, {IF EXISTS}, {Item Down}, {Item Left}, {Item Right}, {Item Up}, {RESTART}, {SHELL MACRO}, {STATE}. Deleted {Item Down}, {Item Left}, {Item Right}, and {Item Up} from the Merge example. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 875 Changed first sentence of second paragraph under {FIELD NAMES} to: The {FIELD NAMES} command must be the first command in the secondary file. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 877 Changed last sentence in paragraph above Macros heading to: Each subsequent time the {FOR} command is executed (at the top of the loop), the variable is incremented by the step value. Changed first comment in the Macro example to: {;}For every value of Counter from 1 to 20 (values incremented by 1 each time through the loop)~ Changed third comment under Macros example to: {;}End of {FOR} loop. Repeat the loop unless Counter=20~ Changed last sentence of first paragraph under Merge example to: After that, the loop will end because 22 (the next increment after 19) is greater than 20 (the stop value). APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 878 Changed first comment under Merge example to: For every value of Counter from 4 to 20 (values incremented by 3 each time through the loop) Changed third comment under Merge example to: End of {FOR} loop. Repeat the loop unless Counter >=20~ APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 883 Deleted last sentence under "Merge" example for {IF EXISTS} command. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 885 Changed comment for {Item Left} line under "Macros" example for the {Item Left} command to read: {;}Move left to the previous cell~ APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 886 Changed first sentence under {Item Up} command to read: The {Item Up} keystroke command is used in tables and paragraph numbering to move up one section or cell. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 887 Changed last sentence under "Merge" example under {KEYBOARD} command to read: See the Merge subheading under {STATUS PROMPT} for an example of how to use this command. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 893 Added following line under {END FOR} line in "Merge" example under {MID} command: {LABEL}End~ APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 894 Changed {PROMPT} line of "Macros" example under {NEST} command to: {PROMPT}{^P}{^A}{Up}The macro is altering your file. Please Wait~ APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 895 Changed {ASSIGN} lines under "Merge" example for {NEST MACRO} command to read: ~{ASSIGN}Address~{FIELD}Address~~{COMMENT} ~{ASSIGN}City~{FIELD}City~~{COMMENT} ~{ASSIGN}State~{FIELD}State~~{COMMENT} APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 896 Changed second sentence in second paragraph above "Macro" example for {NEST PRIMARY} command to read: However, using this command without specifying a filename ({NEST PRIMARY}~) is the same as using the {SUBST PRIMARY} command with the current primary filename as the argument ({SUBST PRIMARY}CurrentPrimaryFilename~) (see {SUBST PRIMARY} below). APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 898 Changed {FOR} line under "Merge" example for {NEXT} command to read: {FOR}Fred~1~15~1~{COMMENT} Changed {IF} line under "Merge" example for {NEXT} command to read: ~{IF}{VARIABLE}Fred~>10~{COMMENT} APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 900 Changed second paragraph under {NTOK} command to read: For example, if you take the {NTOK} of 32809 (Save), a Save is executed. If you take the {NTOK} of 1537 a "ñ" is written out. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 903 Deleted bulleted item "Error returned by a nested macro" from information under {ON ERROR}. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 909 Changed first comment line under "Macro" example for {PAUSE KEY} command to read: {;}Send message to user.~ Added following lines to bottom of "Macro" example for {PAUSE KEY} command: {STATUS PROMPT}~ {;}Clear prompt.~ APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 911 Deleted {QUIT} from Macros example for {QUIT} command. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 913 Changed last sentence of "Merge" example for {RETURN} command to read: See the Merge subheading under {CALL} for an example of how to use this command. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 921 Deleted last sentence under "Merge" example for {STATUS PROMPT} command. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 923 Changed KEY CMD 82 to: 82 Delete Word (Ctrl-Backspace) APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 926 Deleted {LOOK} from the "Merge" example under {STOP} command. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 929 Changed second sentence in second group of numbers under CellState (24) to: 2 Attribute is cell-specific. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 930 Changed last sentence under Equation (6) to read: For example, if the current equation is 1.2, {SYSTEM}Equation~ will return 34 (i.e., 34/32=1, 34%32=2). APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 938 Under "Macros" example for {VARIABLE} command, we deleted {IF EXISTS} and {NEST MACRO} and added {MENU OFF} and {RESTART} in alphabetical order. Under "Merge" example, we deleted {IF EXISTS} and added {BREAK} and {NEST MACRO} in alphabetical order. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 939 Under "Merge" example under {WAIT} command, deleted {LOOK}. APPENDIX K: MACROS AND MERGE, PROGRAMMING COMMANDS Page(s): 939 Changed second sentence under {WHILE} command to read: This command is like the {FOR} command, except that it does not increment a value each time through the loop. APPENDIX M: PULL-DOWN MENUS Page(s): 957 Changed "Goto DOS (or Goto Shell)" to "Go to DOS (or Go to Shell)" GO TO Page(s): 959 Changed "Goto" to "Go to" APPENDIX N: STARTUP OPTIONS Page(s): 965 Changed line after wp filename to read: wp/f2 APPENDIX R: NETWORK ADMINISTRATION Page(s): 999 Changed example under first bullet to: WP /nt=1/ps=f:\wp51\setup/d=c:\bruce/u=bwk Changed example under second bullet to: set wp=/nt-1/ps-f:\wp51\setup APPENDIX R: NETWORK ADMINISTRATION Page(s): 1000 Changed second sentence under Personal Setup Files to: From within WordPerfect, the user may use the Setup feature (Shift-F1) to select different default settings that would be unique to him or her. APPENDIX R: NETWORK ADMINISTRATION Page(s): 1000 Deleted first "can" in first sentence on page. INDEX Page(s): Index Changed reference under Password, protect to 396 and reference under Password, remove to 397. INDEX Page(s): Index Changed reference for Header, row to p 710. INDEX Page(s): Index Added following reference: Ctrl-6 336 INDEX Page(s): Index Deleted second occurrence of "and [Display Off]" under Macro Messages. INDEX Page(s): Index Added following page reference to Decimal/align, table cell: 719