LST ON,NOASYM
 SBTL +David G. Sparks, Waterloo, Iowa+ 
 REP 32
*                              *
*     Hex/ASCII Dump and       *
*   Disassembler Utility  by   *
* Val J Golding, David Sparks, *
* Dave Lingwood, Wm. Steinberg *
*                              *
* with some subroutines        *
* Stolen from Apple's monitor  *
*                              *
* Updated and with a search    *
* routine by Greg Kielian      *
*                              *
* Disassembler module modified *
* to run under ProDOS 1-2-84   *
* by David Sparks.             *
*                              *
* Original first appeared in:  *
* Call -A.P.P.L.E. : Oct. 1982 *
*                              *
 REP 32
 SKP 3
STADR EQU $1A
NDADR EQU $1C
CSWL EQU $36 
PCL EQU $3A
LINNUM EQU $50
FRETOP EQU $6F
VARPNT EQU $83
VECTOUT EQU $BE30
GETBUFR EQU $BEF5
PTRGET EQU $DFE3
CHKSTR EQU $DD6C
SYNCHR EQU $DEC0
GETSPA EQU $E452
MOVSTR EQU $E5E2
INSTDSP EQU $F8D0
PRNTYX EQU $F940
PCADJ EQU $F953
PRBYTE EQU $FDDA
COUT EQU $FDED
*
*
*
 ORG $9700
*
*
*
NEWLINE LDY STADR+1 ;Get start
 LDX STADR ;address
 LDA #$8D ;and c/r
 JSR COUT ;Print c/r
 JSR PRNTYX ;Print address
 LDY #0 ;Initialize
 STY FLAG ;Flag
 LDX #$07 ;and counter
 LDA #$BA ;":" CHAR 
 JSR COUT ;Print colon
DATAOUT LDA #$A0
 JSR COUT ;Print space
 LDA (STADR),Y ;Get byte
 STA BUF,X ;Park in buffer
 DEX  ;Keep count
 JSR PRBYTE ;Output byte
 LDA STADR ;Check to
 CMP NDADR ;see if
 LDA STADR+1 ;start < end
 SBC NDADR+1
 BLT NXTBYTE ;Only continue if less than
 INC FLAG ;Flag >= result
 BNE SPACEOUT ;Halt output of bytes
NXTBYTE INC STADR ;Bump start
 BNE MOD8CHK
 INC STADR+1
MOD8CHK LDA STADR
 AND #$07
 BNE DATAOUT ;Not done with line yet
SPACEOUT TXA  ;Check counter
 BMI ASCIDUMP ;Skip if 8 bytes outputted
 LDA #$A0
PUTSPA JSR COUT ;Print
 JSR COUT ;three
 JSR COUT ;spaces
 STA BUF,X ;and pad buffer
 DEX  ;Repeat
 BPL PUTSPA ;until x is negative
*
ASCIDUMP LDA #$A0 ;Output a space
 JSR COUT
 LDX #$07 ;Counter
 LDA ASCFLAG
 BNE NOASC
ASC LDA BUF,X ;Get byte
 ORA #$80 ;Make it legal
 CMP #$A0
 BGE NOTCTRL
 CMP #$80
 BEQ NULL
 AND #$7F
 BIT $C01E
 BPL NOTCTRL
 ORA #$40
 BNE NOTCTRL
NULL LDA #$AE ;Replace @ with .
NOTCTRL JSR COUT ;Print legal byte
 DEX  ;Repeat 8 times
 BPL ASC
NOASC LDA FLAG ;Check flag
 BNE DONE ;Repeat if clear
 JMP NEWLINE
DONE RTS ;else all done
 RTS  ;else all done
*
* The disassembler module calls a monitor
* routine which uses PCL ($3A).  The disk
* driver routines of the ProDOS Machine
* Language Interface also use that address
* and do not restore it.
*
* To deal with the conflict, the disassembly
* line is now output to a memory buffer,
* an Applesoft string variable descriptor
* is "pointed" to the buffer, and the 
* Applesoft program then writes the string
* to disk.  This way the disk driver routines
* are never called during output of a 
* line of disassembly.
*
* Thanks to Ken Kashmarek for the idea.
*
*
* CHECK SYNTAX AND LOCATE STRING POINTER
*
DISSAM LDA #$E4 
 JSR SYNCHR ;IS IT STR$ TOKEN?
 JSR PTRGET ;FIND VARIABLE
 JSR CHKSTR ;BE SURE IT'S A STRING
 STA STRPTR
 STY STRPTR+1 ;SAVE POINTER TO STRING DESCRIPTOR
*
* SAVE MONITOR AND SYSTEM OUTPUT ADDRESSES
*
 LDA CSWL
 STA CSAVE ;SAVE ZERO PAGE OUTPUT POINTER 
 LDA CSWL+1
 STA CSAVE+1
 LDA VECTOUT
 STA VSAVE ;SAVE SYSTEM OUTPUT POINTER 
 LDA VECTOUT+1
 STA VSAVE+1
*
* POINT SYSTEM OUTPUT TO OUR ROUTINE
*
 LDA #>OUTSTRNG
 STA VECTOUT
 LDA #<OUTSTRNG
 STA VECTOUT+1
*
* SET LEN TO ZERO START OF BUF, THEN CALL MONITOR 
*
 LDA STADR
 STA PCL
 LDA STADR+1
 STA PCL+1
 LDA #$0
 STA LEN
 JSR INSTDSP ;OUTPUT A LINE OF DISASSEMBLY
*
* CALL PCADJ TO UPDATE POINTER TO NEXT MNEMONIC
*
UPDATE JSR PCADJ ;RETURNS POINTER IN Y,A
 STA STADR
 STY STADR+1
*
* SEND A CARRIAGE RETURN BECAUSE INSTDSP DIDN'T
*
 LDA #$8D
 JMP COUT ;EXIT THROUGH COUT
*
* CLEANUP DETACHES ROUTINE
* AND RESTORES SYSTEM OUTPUT TO NORMAL
*
* RESTORE CSWL, VECTOUT AND VARPNT 
*
CLEANUP LDA STRPTR
 STA VARPNT
 LDA STRPTR+1
 STA VARPNT+1
 LDA CSAVE
 STA CSWL
 LDA CSAVE+1
 STA CSWL+1
 LDA VSAVE
 STA VECTOUT
 LDA VSAVE+1
 STA VECTOUT+1
*
* POP ADDRESS OFF THE STACK
*
 PLA
 PLA
*
* POINT DESCRIPTOR TO BUF
*
 LDY #$0
 LDA LEN
 STA (VARPNT),Y
 INY
 LDA #>BUF
 STA (VARPNT),Y
 INY
 LDA #<BUF
 STA (VARPNT),Y
*
* RETURN WITH C/R IN ACCUMULATOR
*
 LDX XSAVE ;RESTORE X-REG
 LDA #$8D
 RTS
*
* ROUTINE TO CAPTURE SYSTEM OUTPUT IN A STRING
*
OUTSTRNG STX XSAVE ;SAVE X-REG FOR SYSTEM
 AND #$7F ;TURN OFF HIGH BIT
 CMP #$0D ;IS IT C/R?
 BNE NOTCR ;NO, PUT IN BUFFER 
 LDA LEN ;TEST LENGTH
 BNE CLEANUP ;OK TO QUIT IF SOMETHING IN BUFFER
 BEQ GETMORE ;DON'T ALLOW NULL STRING TO BE RETURNED
NOTCR LDX LEN ;GET LENGTH BYTE
 STA BUF,X ;STORE IN BUFFER
 INC LEN ;MAKE LENGTH LONGER
GETMORE LDX XSAVE ;RESTORE X-REG AND GO
 RTS  ;BACK TO CALLER
*
*
*
*  Here's Greg's FIND routine
*
FINDADD LDY BUF+1 ;BASIC enters here for find
 LDX BUF ;Print address searching for
 JSR PRNTYX
 LDA #$BA ;":" character 
 JSR COUT
 LDA #$8D
 JSR COUT
NEWLN LDA #$0
 STA PRTCNT ;Reset print count
NEWADD LDY #$0
 LDA (STADR),Y
 CMP BUF ;First byte match?
 BNE NXTADR
 INY ;If it does, try next byte
 LDA (STADR),Y
 CMP BUF+1 ;Second byte match?
 BNE NXTADR
 LDY STADR+1 ;If both match,
 LDX STADR ;print address
 LDA #$A0 ;(ASCII space)
 JSR COUT
 JSR PRNTYX
 INC PRTCNT
NXTADR LDA STADR ;Check to see if
 CMP NDADR ;start < end
 LDA STADR+1
 SBC NDADR+1
 BCC MORE
EXIT LDA #$8D
 JSR COUT
 RTS
MORE INC STADR ;Bump start
 BNE SAMEPG
 INC STADR+1
SAMEPG LDA PRTCNT ;Is current line full?
 CMP #15 ;Max. of 15 addresses per line
 BCC NEWADD
 LDA #$8D
 JSR COUT ;Next line
 SEC
 BCS NEWLN
*
*  A LITTLE ROUTINE TO PROTECT
*  THIS CODE IN THE MLI BITMAP
*  AND TO RESERVE ITS SPACE
*  ABOVE HIMEM IN BASIC.SYSTEM
*
PROTECT LDA #$03 
 JSR GETBUFR
 BCC OK
 BRK
OK LDA #$01 
 ORA $BF6A
 STA $BF6A
 LDA #$C0
 ORA $BF6B
 STA $BF6B ;PROTECT PAGES IN BIT MAP
 RTS
*
* ROUTINE SCRATCH STORAGE AREA
*
STRPTR DS 2,0
CSAVE DS 2,0
VSAVE DS 2,0
XSAVE DS 1,0
PRTCNT DS 1,0
FLAG DS 1,0
ASCFLAG DS 1,0
LEN DS 1,0
BUF EQU *